9600GT voltmod thread

Printable View

Show 100 post(s) from this thread on one page

03-06-2008, 11:21 AM
Zeus

Quote:

Originally Posted by trez0r

Is he running reference card or is it with custom pcb w/ 3 phases?

Eh, i'm still patiently waiting for what is i guess OCP mod..

EDIT: On the other hand maybe there is no workaround on this black screen problem and maybe it's just because of weak power phases on reference design. Tho hope dies last.

Erm...

Quote:

vvikoo's 9600gt is not reference desgin,
exclusively has hdmi,displayport and 3phase PWM for GPU.

I didn't know there was a difference. :brick:
03-06-2008, 11:50 AM
LyP0

I did the mod today and mine also craps out as soon as I put the vr on. This is just anoying.
Stock it gets 1.1-1.11v and when i put the vr on the voltage is 1.15. I cant even be in windows for more than a few seconds.
This card is rapidly turning into the most f***ed up thing i've bought
03-08-2008, 04:16 AM
Xargo

I tried to ground the pin #35 today and it seemed to work, sort of. I ran some benchies but the card power line components quickly turned very hot and started to produce a pitched sound and this was only with 1.25V (3d) voltage and 775 clock. But maybe this is good news to people using extreme cooling?

I guess I'm stuck to 800/2000/1107 clocks with this card.
03-10-2008, 03:23 PM
trez0r

Nothing helps my card. Tried grounding pin35 (VID5) as Xargo suggested - same black screen.
Xargo may i ask you why exactly vid5? There are VID0-VID6 - why exactly VID5?
03-10-2008, 09:35 PM
Xargo

Quote:

Originally Posted by trez0r

Nothing helps my card. Tried grounding pin35 (VID5) as Xargo suggested - same black screen.
Xargo may i ask you why exactly vid5? There are VID0-VID6 - why exactly VID5?

It was as largon suggested here:

Quote:

Originally Posted by largon

Yes, the mod works alright.
According to the datasheet of ADP3207, disabling OVP should be very simple: pin #35 (on ADP3208A) to ground using just a jumpwire.

But anyway, I suspect it's the power phases holding this card back. Looks like if you want to have a nice overclock, better not get the reference design. I'm thinking step-up to 9800gtx or some such. Should have plenty enough power headroom at least =)

I'm just a little bit disappointed with my 9600 considering I was able to run 8600gts @ 1.666V \,,/ with only air cooling. Not a reference design though. Now I'm going to sell it.
03-11-2008, 10:08 AM
Fr3ak

I tried a quick and dirty VGPU mod and it doesnt work. OVP or whatever seems to kick in at about 1.18V. Funny is that the card has 1.01V for bootup and 1.11V once it loads the driver. 1.13-1.15V is the voltage under load.
03-12-2008, 02:13 AM
Xargo

Good news!

I tried modding the voltage settings in bios today. I was able to boot the system @ 1.52V (1.58V 3d) and run these tests (one by one) in 3dmark06:

Fill Rate - Single-Texturing 6625,231 MTexels/s
Fill Rate - Multi-Texturing 21136,088 MTexels/s
Pixel Shader 414,076 FPS
Vertex Shader - Simple 225,755 MVertices/s
Vertex Shader - Complex 173,459 MVertices/s
Shader Particles (SM3.0) 128,667 FPS
Perlin Noise (SM3.0) 126,964 FPS

Clocks were 875/2150/945. Somehow the gpu overclock resulted in poor memory overclock and 999 mem crashed the tests instantly, vmem was 2.075V.

The stated voltage was achieved together with the 1.2V vid-mod so I have no idea what voltage the card would run if you just flashed my modified bios without any mods. In case someone wants to give it a try, I put it online here:

http://www.hut.fi/~hjkauhan/9600mod.rom

If you try it out, please report what voltage you get. Just be careful with the 1.58 vgpu, the core reached 103C in multi-texturing test with a VF-900cu cooler.
03-12-2008, 05:57 AM
trez0r

I doubt the bios will help me, but thx i will try it.
Can you run atitool artifact scanner too at those frequencies?
Did you measure the voltage with DMM?

edit: the bios file you supplied is with the default voltage setting.
03-12-2008, 07:23 AM
Xargo

Quote:

Originally Posted by trez0r

I doubt the bios will help me, but thx i will try it.
Can you run atitool artifact scanner too at those frequencies?
Did you measure the voltage with DMM?

Atitool has never worked for me even with default settings with any of the three geforces I have (6800u, 8600gts, 9600gt). I gave it a go anyway and it crashed instantly when I started the artifact scan.

Here's a photo of the voltage reading in idle:

http://users.tkk.fi/~hjkauhan/kuvat/...0gtjannite.jpg

Quote:

Originally Posted by trez0r

edit: the bios file you supplied is with the default voltage setting.

That's strange. I haven't tried it without the 1.2V vid mod though. When looking at the vid-table, going from 1.2V to 1.5V would require going from 0011000 to 0000000. So one explanation could be that when you have default settings ( 0100000 ), the bios switches the vid4 and 3 to "0" but they are "0" already so nothing happens. Could this explain what's happening here?

If it works like that, I could try out 1.1125V ( 0011111 ) which would (hopefully) result in 1.4125V ( 0000111 ).

edit: Ok, I didn't think it all the way through... we only have knowledge of vid2-5 resistors so I can't set 0011111. So I tried setting 1.15V ( 0011100 ) and with my modded bios the multimeter now shows 1.48V. Time for some benchmarks.
03-12-2008, 08:43 AM
fatbird2046

We should focus on OCP or something else,they are the main problems we meet.But dont give up so easily.
2-phase design is not so weak, Just think about 8800GT reference card,it's 2-phase design too!
03-13-2008, 02:59 AM
Fr3ak

When I try to boot with more than 1.2xx Volt with just the VGPUmod, the card shuts down immediately after a few seconds.
03-13-2008, 03:09 AM
largon

Fr3ak,
Have you tried to disable OVP by grouding pin #35 on ADP3208A?
03-13-2008, 11:57 AM
Boogerlad

http://www.galaxytech.com/Product_De...ass1=1&class2= any one know a vmod for that?
03-13-2008, 12:18 PM
wittekakker

Jups, I'm having the card right here, voltmods ready. I can't share them for now, I first have a friend picking up the card and test out how it overclocks. They will be online soon, don't worry.
03-14-2008, 02:35 PM
op1e

So still no-go on just a modified bios, then?
03-18-2008, 02:24 PM
trez0r

I guess we are stuck here with OCP.
@Fatbird - have you found anything interesting out yet?

Nowhere on the internets is any information on how to mod the OCP on 9600gt. In fact many people have problems with factory overclocked cards on reference design which has been called the black screen - the same thing which happens when we slightly increase the voltage and try to up frequencies (and even when not increasing the voltage but upping the gpu/shader freq.).

Atitool artifact scan is a beautiful test to see the black screen in action immediately almost every time.
03-19-2008, 11:38 AM
largon

Got bored with my G92GTS which is overkill for my needs anyways, so I decided to downgrade and save some $$$ and ordered a Palit 9600GT. It's a non-reference btw.
I guess I'm gonna have to warm-up my soldering iron again. :p
03-20-2008, 01:50 AM
trez0r

Nice!
But sad that it is not reference, then you would prolly come up with some ocp mod. :)
Anyways gratz and keep us posted.
03-20-2008, 11:09 AM
Lanc

Quote:

Originally Posted by Boogerlad

http://www.galaxytech.com/Product_De...ass1=1&class2= any one know a vmod for that?

I have this card and know vmem mod - it is pretty easy, pencil vmem :)

Quote:

Originally Posted by wittekakker

Jups, I'm having the card right here, voltmods ready. I can't share them for now, I first have a friend picking up the card and test out how it overclocks. They will be online soon, don't worry.

Do you try voltmods ?

I think i found a place to pencil to increase vGPU, but when i make ~1.17v (and up, max i tried was 1.25) on GPU i have many artifacts in 3DMarks. 2D and Ati Tool Artifacts Scan are clear :confused:
03-20-2008, 12:58 PM
kaptan54

Quote:

Originally Posted by Lanc

I have this card and know vmem mod - it is pretty easy, pencil vmem :)

Do you try voltmods ?

I think i found a place to pencil to increase vGPU, but when i make ~1.17v (and up, max i tried was 1.25) on GPU i have many artifacts in 3DMarks. 2D and Ati Tool Artifacts Scan are clear :confused:

pls show us pencil mod point..
03-22-2008, 05:31 AM
Lanc

Here we are ;]
http://img230.imageshack.us/img230/1260/vmemoq0.th.jpg

vMEM def - 1.95v - max 2200Mhz - ATITool artifact scan free
vMEM - 2.06v - max 2300Mhz - ATITool artifact scan free ;)
03-22-2008, 06:22 AM
massman

Quote:

Originally Posted by Lanc

Do you try voltmods ?

I think i found a place to pencil to increase vGPU, but when i make ~1.17v (and up, max i tried was 1.25) on GPU i have many artifacts in 3DMarks. 2D and Ati Tool Artifacts Scan are clear :confused:

If you're talking about the Galaxy ... I'm the one who was pciking up that card and seeing how it overclocked. Voltmods work perfectly, at stock clocks I'm able to go upto 1,67-1,7 volt before the screen goes blank.

Now running 850/2150/1120 stock cooling at 1,41v/2,1v
03-22-2008, 06:28 AM
Lanc

Can you show us a vGPU mod for Galaxy ? ;]
03-22-2008, 07:29 AM
wittekakker

Soon, have some patience please, massman is still testing his card :)
03-22-2008, 07:58 AM
massman

Ln² comes next wednesday, so I hope to get the article ready in about a week ... :)

Show 100 post(s) from this thread on one page