Gotta finish all the measurements before I get these mobos naked :D
Once I start something I can't let it go before I get everything done :p:
Everything should be ready in 7 hours or so...
Printable View
Gotta finish all the measurements before I get these mobos naked :D
Once I start something I can't let it go before I get everything done :p:
Everything should be ready in 7 hours or so...
I've tryd to do some 32M results @ 2000mhz ~2.2v but i can't bench it with even 1.80v vmch at 8-8-8-24 1T on my P5K3 Deluxe... i think i was not lucky with this one...
but the problem is not with the Cell's :)
1900mhz 7-7-6-18 1T 2.0v
(time doesn't matter, no tweaks:D)
http://imageupload.com/out.php/i62543_1900cl732M.JPG
hmmm so single 32m is ok but dual 32m no?
no i don't talk about dual 32m, i've run only single, and 1900 clocks nice and easy but around 2000 stability is suxx :rolleyes:Quote:
Originally Posted by saaya
bah... can't believe this...
i write upper that 1.7@1.8v vmch helps not much, 2000mhz 8-8-8 32M even don't "stable", look at this:
2000mhz 8-7-6-21 1T 2.20v and with 1.85v vmch, idiot mobo :ROTF:
http://img45.imageshack.us/img45/787/2000cl832miu3.jpg
nice one achill3us you can now join 1000mhz club:D
i've been saying it in every thread...just give the MCH volts with the P5K3-Dlx ;)Quote:
Originally Posted by Achill3uS
glad to see you got 1000MHz done.
haha, thanks :DQuote:
Originally Posted by GLENBOY
right :) but for every day i don't give more than 1.7v, the thermaltake extreme spirit heatsink what i use on the NB is not bad, but it needs a very fast fan :rolleyes: your NC-06 (or something like that), is better i'm sure...Quote:
Originally Posted by 3oh6
thanks, now i'm playing with CL9 :D
1M 2060mhz 9-9-9-24 1T 2.0v
http://img153.imageshack.us/img153/4150/1030sr6.jpg
and max valid was at 2100mhz (same voltage), but i've forget to update cpuz 1.43, so i will try to go higher again... btw, what is the freqency WR on DDR3? 2200 or more?
hehe, today push a bit harder :D
vmch: 1.87v
vdimm: 2.20v / 2.24v
2062mhz 7-7-6-21 1T validation
32M 2000mhz 7-7-6-21 1T ;)
http://img120.imageshack.us/img120/3...mxtwinzpj3.jpg
very very nice mate, i don't see any of my sticks doing that...now get that 32M time down to where it should be :D
thanks mate :D yep, i will try to go down, this run was with only a few tweaks, far away from maxed out, but i was happy to see the last loop :)Quote:
Originally Posted by 3oh6
Good to see some nice ddr3 being released. Nice work.
;)Quote:
Originally Posted by bf2142lol
again 32M on 2000 cl7 but with wolfdale :D
vmch: 1.87v
vdimm: 2.20v / 2.24v
http://img148.imageshack.us/img148/4...2me8400ku6.jpg
what's up guys? no results for a week? wake up and go benching :D
my best 32M made at the weekend of course with the Cell's with just 2.0v, and they was able to run higher of course :) AND finally my P5K3 Deluxe has no coldbug on LN2 i've tested it :p: only this ES chip :( so this result was made on DI...
http://img256.imageshack.us/img256/9...olat32mtu7.jpg
and a pic together :D
http://img80.imageshack.us/img80/9151/lapomwh2.jpg
Wow! What happened to your heatpipes? Did you chop them? Plenty voltmods there too I see ;)
Nice results, how far are you going to push your Cells?
Bill where is the LN2 session you promised us ? :( P5K3 dlx on ln2 action, that's what we want to see ;) :D
LN2 session ? ahahahahah :rofl:Quote:
Originally Posted by George_o/c
That's gonna be a while :D
I've got more than a lot of things to do, no time, and a f***** up schedule.
I haven't published a review still...and it's almost February :(
Gotta speed up things...
I'm just traveling from place to place these weeks :shakes: ...I don't have another option although :(
yep, an accident happend with the heatpipe's so they was choped :)Quote:
Originally Posted by stone_cold_Jimi
i've never pushd them more than 2.25v
...
aaaand finally i did it :D
32M 2000MHz 7-6-5-18 1T @ 2.20v / 2.24v w/ 1.90v vmch
(of course at 8*500, it's only c1e bug with 1001 bios and 45nm :rolleyes:)
http://img524.imageshack.us/img524/9...mxtwinzhs8.jpg
nice! :toast: how did you do it? :D
did you try single channel max?
thx ;) hmm with the more mch voltage? :D the fun is, i've try to go a bit higher with the fsb 500>501 and after the first loop i've got the Pi error :lol:
no, never... should i?
single channel usually runs much better and you need less vdimm to get more results quite often. imo it shows well how the chipset limits the ocs.
how much vmch did you try?
btw, did asus ever fix the bios bug with high fsb speeds?
i cant boot with 2050mhz on p5k3, even in single channel and even with high vdimm and 888 when the stick can do 2025 completely stable with much less vdimm. if i boot at 2ghz and use setfsb i can get to 2050 without any problems...
im still using 0604 i think, whats the latest bios for p5k3 and is it good?
All my tests were performed & booted from BIOS fine.
I used BIOS v0810... but there's a recently released v1001 ( which I haven't tested yet due to various reasons )
i will try single channel soon, thanks to remind me :)Quote:
Originally Posted by saaya
i use for testing always 1.85-1.9 vmch
hmm interesting, i can boot and test without any problems above 2000mhz cas7 or cas8 too (2000 8-7-6-21 is 3dmark stable with 2.20v and 1.7 vmch), but if i use setfsb, i will lose my "stability"
i think 0810 is the best, this 1001 beta for 45nm is crap, c1e bug is very annoy, but memory control seems a bit better maybe...
Sweet job champ ;).
Keep pushing it!
ok, ill try 0810 and 1001 if i can find the time and test if it improves mem/fsb ocing :D
so really, none of you have this bug at 2050mem speed?
i cant boot at that speed on any of the p5k3 boards i have... 2025 is 100% stable but 2050 doesnt even boot. weird...
and has any of you noticed the 1600 memspeed bug?
if you boot at 1600 or 1620 etc, then the board will sometimes not boot even tho the settings are perfectly stable. usually turning off the psu and turning it on again and then booting up works, but with this bug it doesnt. the board boots but the screen stays black. after several psu off switches and boot attempts the bios then shows pciE speed of 150mhz which of course was too much and the videocard didnt work.
i first thought its a vga problem but it only happens on asus p5k3 boards around 1600 memspeed. which is weird since that is the speed many people boot at and run their mem at 24/7...