Printable View
lol...... nah seriously my ram died and i can't use my computer until i get it back approx 2 weeks.....So 2 weeks is plenty of time to do the stuff i wanted to do first time around but didn't get around 2....Quote:
*cough* bull *cough*
you just needed another reason to take your system appart, right?
have fun!
And for the record my ram dying wasn't necessarily a bad thing haha
I don't have the accelerator nozzles yet but i heard there coming out within the next 2 weeks...waiting on them before i put my cpu loop back together....yes there for the fuzion.Quote:
Where you got the accelerator nozzles? It's for the FuZion right ?
i will be getting mine from radiical.com.au
Where to put a third pump is the issue for me and a third loop.
Like you, there's room for a single rad and with the summer we're expecting and EK about to release a 680i MOSFET block, it's very tempting.
im putting my third pump in my drive bays.... under my reservoirs...
I had my hard drives there...but i'm going to put them above my psu..cut the hd cages that came with the case drill a few holes and mount them there.
Yeah if ek bring's out that mofset block out soon...i'll put it in the third loop..Did ya get those sketches to him>??
I'll be using ek block's on the nb,sb and vrm's(when come out)
cheers
update:
Measured and prepped side panels for cutting...(only 1 panel shown)
http://img208.imageshack.us/img208/4796/nupc054rl5.jpg
Painted and cut 1 piece of modder's mesh for side panel (waiting on gam for second piece,eta 1 week)
http://img146.imageshack.us/img146/3550/nupc055lt0.jpg
also cut and painted some ac ryan mesh to cover drive bays...
http://img211.imageshack.us/img211/8356/nupc053ge4.jpg
thats all for now...
next will be....
cutting lian li side panels
sanding and polishing mid section to a mirror finish
Add ac ryan mesh to drives bays
purchasing nb sb mofset blocks for my third loop
More updates soon
cheers
hey fellaz which ek block's will fit the nb and sb of the evga 680i mobo? And what store can i get them both...
I think the ek nb evga 680i will fit on the nb(due to the name) but no idea with the sb...
Anyone with ek blocks on the nb and sb can you please post a pic of link me to one
cheers
EK680i and EK Nf4 rev1.1
http://img.photobucket.com/albums/v4...Moboblocks.png
The V1000 drive cages go well hanging above the V2000 psu.
jedda where can i get both those blocks?? ek directly???
cheers mate
Yeah, I got them direct from EK
Shipping was reasonable. Not sure if he still doesn't do paypal but bank transfer worked OK for payment.
PerfPC has the delrin versions in stock so you could get them that way if you didn't want acrylic. I prefer the delrin.
yeah i want the same one's you used....Quote:
Yeah, I got them direct from EK
Shipping was reasonable. Not sure if he still doesn't do paypal but bank transfer worked OK for payment.
PerfPC has the delrin versions in stock so you could get them that way if you didn't want acrylic. I prefer the delrin.
Which place with ship faster i want to complete my loop before the 13th oct if possible....
didn't you say perfpc takes 2 weeks or so??
cheers
PerfPC fastest was 6 days to me (outside capital city) and slowest has been 8 days.
EK fastest was 7 days and slowest is hard to say as one went missing and there was a small delay before I asked eddie to ship a replacement. Must say he was very ready to take my word it hadn't arrived and dispatch another.
$Aus is doing much better against the greenback than euro. So I just looked to work it out nd PPC is out of the delrin S/B block Nf4 1.1. Then I looked at EK and the delrin 680i is out of stock there too.
High demand it seems.
Edit- Just been through my list of WC suppliers and although I found Nf4 in stock at Chilled PC in the UK, I can't find a delrin 680i block in stock anywhere.
damn.....i might have to source each block from different places.....680i block from ppc and nf4 from chilled pc will be more xpensive this way :(Quote:
PerfPC fastest was 6 days to me (outside capital city) and slowest has been 8 days.
EK fastest was 7 days and slowest is hard to say as one went missing and there was a small delay before I asked eddie to ship a replacement. Must say he was very ready to take my word it hadn't arrived and dispatch another.
$Aus is doing much better against the greenback than euro. So I just looked to work it out nd PPC is out of the delrin S/B block Nf4 1.1. Then I looked at EK and the delrin 680i is out of stock there too.
High demand it seems.
Edit- Just been through my list of WC suppliers and although I found Nf4 in stock at Chilled PC in the UK, I can't find a delrin 680i block in stock anywhere.
cheers mate
Yeah,
PPC would be $65Au for the 680i with shipping inc.
Just looked to work out the other and it's now listed as sold out. Must've just gone. bummer.
bummer alright....
Should i order that block from ppc?
Or just order everything from ek directly? and wait until he has them all ready...680i nb,nf4 and mofset....might be awhile though oh well i guess i can wait....Less hassle imo...
thanks mate...
fam
i'd probably wait it out with one store and save on shipping fees,
(correct my if i'am wrong though),(but i think you guys and take the plunge and buy them seperately with seperate shipping fees, hehehe)
yeah i probably wait until ek has all blocks ready to ship...Quote:
i'd probably wait it out with one store and save on shipping fees,
(correct my if i'am wrong though),(but i think you guys and take the plunge and buy them seperately with seperate shipping fees, hehehe)
ok i'm back here's a few things i have ordered for my updated rig....
Petra's tech shop
Scythe backplate kit
pt nuke
Laing DDC w/ Petra'sTech DDCT-01s Top Combo
Pc case gear
Mx-2 thermal compound
4 90cm uv blue sata cable's
Swiftech hydrx
Fan moulding 5 metre's
Radiical
Acrylic Resevoir
3m excellon 7/16 tubing
Purple dye
120 rad slimline
Ek waterblock's
Ek 680i evga nb block
Ek nf4 rev 1.1 block
Ek 680i evga mofset block
12 ek 1/2 barbs
Gam mods
Modder's mesh
Bunnings
Sandpaper 800,1000,1500,2000 grit
3m metal polish
microfiber cloth
Industrial strength double sided tape (clear)
That's pretty much everything i need to complete my build now i got to wait for my stuff to arrive...
All the stuff i ordered from Aussie store should arrive in the next few days...
The stuff ordered from Petra's i suspect about a fortnight,
And the stuff from ek maybe 3 weeks.. or so (Will not ship until the 12th)
:up: :up: :up:
Was it cheaper to ship from USA then?
The stuff i ordered from petra's was about $20 shippingQuote:
Was it cheaper to ship from USA then?
and the block's i order from ek shipping is around $20 also
so about the same....
It would of been cheaper to purchase all my gear from Petra's (better exchange rate) but no stock of the blocks i wanted.
every time i look @ that mobo with the blocks on i thing the fuzion is upsidedown lol
Where are you using the metal polish?
that will be fixed when i put the loop back togetherQuote:
every time i look @ that mobo with the blocks on i thing the fuzion is upsidedown lol
middle divider section....Quote:
Where are you using the metal polish?
Thought it might be that.
Supercheap Autos has Mother's aluminium polish for sale.
Grafton
Yeah, it's a Lian-Li thing. lol
yeah,i think i need to go to supercheap anyways bunnings doesn't have high enough grits in wet/dry sandpaper.highest they got is 1200.Does supercheap sell sandpaper?Quote:
Thought it might be that.
Supercheap Autos has Mother's aluminium polish for sale.
cheers