SPI 1M 8.843s by NewBeetle (Team Japan)

Printable View

Show 100 post(s) from this thread on one page

07-26-2007, 01:46 AM
ent

Great runs NewBeetle!

9x6xx 1:1 is a great achievement! With better memories and motherboard sub-9m in 32M would be a history :D
07-26-2007, 02:06 AM
Xtreme Addict

Better memory? What you want from memory which does 610+ 4-4-4-X with only 2.6v :P
07-26-2007, 02:24 AM
Zannema

32M is insane result, impressive 611X9 :cool:
07-26-2007, 07:51 AM
NewBeetle

Many thanks dinos22-san, 1Day-san, Trox-san, T_M-san, mup0-san, yotomeczek-san, ent-san, Miravo-san, Zannema-san :toast:

Quote:

Originally Posted by 1Day

:) OT Would like to know more about the history of LN2 benching and the evolution of the POT designs used in particular. Possible future thread? Or are there records (both text and pictorial) of those early LN2 available on this or other forums? Searched here but no joy.:wave:

Back on topic. Looking forward to seeing more FSB 1333MHz results - again great efforts thanks for sharing.

I will report on the image ,the spec, and the feature of my 4 Pots as early as possible.
Please wait for a while. ;)

Quote:

Originally Posted by T_M

QFT.

Thanks Beetle for sharing your surface area concept, so simple yet so effective

The tape might not only be used to control the temp but also paper is used.

Quote:

Originally Posted by dinos22

guatam is referring to surface area not newbeetle-san

can we see the 4xdifferent pots and what characterises their designs

how do you actually go about testing a CPU and marry to specific pots :)

this is a lot more interesting than all the winking we get from a few guys "in the know" at XS/west i think

I will report them.
Please wait for a while. ;)

Quote:

Originally Posted by yotomeczek

Great result :up:

Where can I buy V-TEC ARC Bed Rev.3.3 (does it include pci card holder ?) ??

Please send me PM.
I'll tell you the information about it.

Quote:

Originally Posted by ent

Great runs NewBeetle!

9x6xx 1:1 is a great achievement! With better memories and motherboard sub-9m in 32M would be a history :D

Thank you so much, ent-san.
I will try sub-9m next run. ;)

Quote:

Originally Posted by Miravo

Better memory? What you want from memory which does 610+ 4-4-4-X with only 2.6v :P

I am shameful in my desire ..deep... :p:
I want to hold out more by this memory. :D

Quote:

Originally Posted by Zannema

32M is insane result, impressive 611X9 :cool:

Hi, Zannema-san.
I'm very sorry for my slightly improvement to your record. :(
Let's hold out sub-9m aiming each other. :up:

DEWA DEWA ～
NewBeetle
07-26-2007, 08:05 AM
Solarfall

hey just noticed that you have very interesting looking container NewBeetle-san. looks really nice imo.
very different from what i have seen . most of them are usually round.. does that kind of design give any advantage in term of cooling power..
or is it just for looks.
07-26-2007, 08:21 AM
Stapler

32m run is very impressive, but I think you can do sub 9 minutes. Good luck.
07-26-2007, 10:18 AM
Zannema

Quote:

Originally Posted by NewBeetle

Hi, Zannema-san.
I'm very sorry for my slightly improvement to your record. :(
Let's hold out sub-9m aiming each other. :up:

DEWA DEWA ～
NewBeetle

Hi NewBeetle-san

I like this challenge :p: :up:
It'll be tough for me to catch you, my E6700 is hard to push over 5700 MHz to bench pi 1m.
07-26-2007, 03:21 PM
PcCI2iminal

New Beetle-san
very impressive :clap:

thx for sharing all that stuff and keep pushing :D
07-26-2007, 04:13 PM
dinos22

Quote:

Originally Posted by NewBeetle

The tape might not only be used to control the temp but also paper is used.

http://homepage2.nifty.com/NewBeetle...+Paper_600.jpg

this is a very interesting design indeed

looking forward to hearing from you regarding this.....i'm in no rush :D
07-26-2007, 06:38 PM
Gautam

NewBeetle-san, that result is absolutely amazing. And to think, just yesterday I was telling Fredyama-san that I figured 9x would be next to useless for serious benching. :p: Amazing performance and 32M stability at such a high FSB. Just amazing.
07-26-2007, 08:06 PM
blind_ripper

very nice super pi benches newbeetle ;)
07-26-2007, 08:08 PM
youngpro

NewBeetle-san id just like to thank all the input and advice you and team japan have given to the overclocking community,

personally i know ive learnt a great deal not only about extreme PI benching, but optimizing performance at slower speeds and today again about pot dynamics,

congratulations on the amazing results ;)

im very interested on how you feel cooling the mch and sb affects your fsb and cpu overclocks? does the Vio mod give you extra stability at higher clocks?
07-26-2007, 11:52 PM
LaMpiR

Excellent result man :)
Congratz
07-26-2007, 11:58 PM
NewBeetle

Thank you always, Solarfall-san, Stapler-san, Zannema-san, PcCI2iminal-san, Gautam-san, blind_ripper-san, youngpro-san, LaMpiR-san :toast:

Quote:

Originally Posted by Solarfall

hey just noticed that you have very interesting looking container NewBeetle-san. looks really nice imo.
very different from what i have seen . most of them are usually round.. does that kind of design give any advantage in term of cooling power..
or is it just for looks.

Not just for looks. :p:
The purpose of this square shape is to expand the bottom product, and to improve the cooling capacity. :cool:

Quote:

Originally Posted by Stapler

32m run is very impressive, but I think you can do sub 9 minutes. Good luck.

It seems "9x622" or "10x573" is necessary for sub-9m.
But never give up. :D

Quote:

Originally Posted by Zannema

Hi NewBeetle-san

I like this challenge :p: :up:
It'll be tough for me to catch you, my E6700 is hard to push over 5700 MHz to bench pi 1m.

I was also the same yesterday. :(
However, when I set "CPU PLL Voltage" to "AUTO" today, my E6700#7 came to be very stable @5.7G or more. ;)
Please try it. :up:

Quote:

Originally Posted by dinos22

this is a very interesting design indeed
looking forward to hearing from you regarding this.....i'm in no rush :D

I cannot show you the internal structure of the pot any more.....
because of the right of the design. :(
Please pardon this situation.

Quote:

Originally Posted by Gautam

NewBeetle-san, that result is absolutely amazing. And to think, just yesterday I was telling Fredyama-san that I figured 9x would be next to useless for serious benching. :p: Amazing performance and 32M stability at such a high FSB. Just amazing.

Even me, it was an unbelievable result. :p:
However, sub-9m will be achieved by 10x. :D

Quote:

Originally Posted by youngpro

NewBeetle-san id just like to thank all the input and advice you and team japan have given to the overclocking community,

personally i know ive learnt a great deal not only about extreme PI benching, but optimizing performance at slower speeds and today again about pot dynamics,

congratulations on the amazing results ;)

im very interested on how you feel cooling the mch and sb affects your fsb and cpu overclocks? does the Vio mod give you extra stability at higher clocks?

I feel the mch and sb cooling is very important.
However, so as not to cool them too much, I am cooling by water.
And I think that Vio mod is not very important for this P5K board.

DEWA DEWA ～
NewBeetle
07-27-2007, 12:07 AM
Zannema

Quote:

Originally Posted by NewBeetle

I was also the same yesterday. :(
However, when I set "CPU PLL Voltage" to "AUTO" today, my E6700#7 came to be very stable @5.7G or more. ;)
Please try it. :up:

DEWA DEWA ～
NewBeetle

Thank for the information, i try it:up:
07-27-2007, 12:22 AM
over@locker886

I say as little later, but congrats your new 32M WR :up:
I think 9x ratio and high fsb (1:1) best way for your plan(sub 9min).

Good luck!
07-27-2007, 01:04 AM
erwinz

WOW.. :) really really nice run.. :)

looking forward for your sub 9m for a 32m run..

Good Luck!! ^_^
07-27-2007, 01:35 AM
NewBeetle

Thank you always, erwinz-san :toast:

Quote:

Originally Posted by Zannema

Thank for the information, i try it:up:

This is today's my result..... :up:

Quote:

Originally Posted by over@locker886

I say as little later, but congrats your new 32M WR :up:
I think 9x ratio and high fsb (1:1) best way for your plan(sub 9min).

Good luck!

9x ratio is "Geki-chin" today... :p:
Next I try my plan by 10x ratio. :D

-----------------------------------------------------------------------

Today I exchanged mobo to P5K-E.
sub-9m was no good, but SPI 1M & hexus pifast are new WR... :up:

modPI 1M new WR : 8.797s @5768.2MHz (FSB576.8MHz x 10)
http://homepage2.nifty.com/NewBeetle/8797s.png

hexus pifast WR : 16.86s @5713.5MHz (FSB571.4MHz x 10)
http://homepage2.nifty.com/NewBeetle...fast_16s86.png

(Set up)
M/B：ASUS P5K-E Rev.1.00G vmod (76M0ACT67***/0401.ROM)
M/B Bed：「V-TEC ARC Bed Rev.3.3」
NB watercooling：Alphacool NexXxoS NBX-A
SB watercooling：Alphacool NexXxoS NBX-N
CPU：Intel Core2 E6700(L633A549#7)
CPU cooling：MaxxNEO + LN2/temp：-161C
Memory：Team Xtreem PC2-6400 1GBx2 4-4-4-4
VGA：Matrox Millennium PCI 2MB
HDD：Western Digital WD360ADFD
Power Supply：OCZ PowerStream 520W
Vcore：1.845V(Actual)
Vio：3.50V(PC Probe 2)
Vdimm：2.61V(Actual)
OS：Windows Server 2003
http://homepage2.nifty.com/NewBeetle/P5K-E_LN2.jpg

(BIOS Setting)
http://homepage2.nifty.com/NewBeetle/P5K-E_BIOS_1.jpg
http://homepage2.nifty.com/NewBeetle/P5K-E_BIOS_2.jpg
07-27-2007, 01:40 AM
erwinz

waaaaaaa....... Team Japan is on the roll.. :woot:

congratz NewBeetle san.. :rocker:

the details are very commendable.. hehehe hope next time a youtube video.. :)

:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
07-27-2007, 01:44 AM
Solarfall

holy crap is there something that team japan can't do....

excellent work as always :toast:
07-27-2007, 01:54 AM
massman

That's just insanity :toast:

How close are you to the 9min barrier?
07-27-2007, 01:56 AM
Xtreme Addict

This is nice... You are the type of a man, who when starts one thing, he will struggle and struggle to achieve absolute maximum :D

I am personally amazed, great score NewBeetle-san!

By the way

If your P5K-E have any cold-bug issues?
07-27-2007, 02:15 AM
1Day

Omedetou! Sub 8.8
07-27-2007, 02:21 AM
G H Z

Fantastic!!!

Amazing!!!

Crazy!!!

A truely inspiring set of results NewBeetle-san :clap:
07-27-2007, 02:25 AM
Zannema

Impressive CPU, and S.O :eek: ;) :worship: :worship: :worship:, great work newbeetle

Show 100 post(s) from this thread on one page