The DFI 965-s DARK wait thread.

Printable View

Show 100 post(s) from this thread on one page

04-05-2007, 07:22 PM
bingo13

Quote:

Originally Posted by deeznuts

ewiz = malabs so i guess that's why they have it already. Shipping to me in San diego would be $10 via ups. Not too bad, use the $5 off coupon and shipping is $5 which is equal to newegg is up the road from me (hour or two away).

Damn I have a quadgt and it's fine except for no BIOS updates forever. Wonder if I should jump.

Download the 011 Beta, it will be official on Tuesday or so. abit will start fine tuning the BIOS for better performance now.

On this board, get ready for some BIOS updates. ;)
04-05-2007, 07:45 PM
Kain XS

Quote:

Originally Posted by dinos22

LOL no joy for Australians

unless i can find another 7 guys to buy with me LOL

Hi Dinos.
Maybe eva2000 could get some of this one?

There is also probability group order at OCX and someone could get your board and then send it to you.

Greetings.
04-05-2007, 09:59 PM
Raja@ASUS

Quote:

Originally Posted by bingo13

Wait a minute, I thought Oskar had nothing to do with this board. I swear I remember a couple of people mentioning that over and over to me. :D

Lol I remember that too, but it's an Oskar-esque board for sure, my guess is that they were either incorrectly informed or incorrect informers...:)

regards
Raja
04-05-2007, 10:09 PM
dinos22

Quote:

Originally Posted by Kain XS

Hi Dinos.
Maybe eva2000 could get some of this one?

There is also probability group order at OCX and someone could get your board and then send it to you.

Greetings.

i shot off an email to Taiwan

if they give me a go ahead i'll organise at least 7-8 boards...should have enough members at i4memory alone to cover that heheheh
04-05-2007, 11:52 PM
2000army

dfi nvidia board or this?
04-06-2007, 03:30 AM
sofarfrome

got my email from William yesterday and the board will arrive 4-11-07 via fedex ground. I am happy to get this board but 2-3 day shipping via USPS is less than $9, I paid $15.15 for fedex ground. Oh well, can't wait to get my grubby hands on this board
04-06-2007, 03:52 AM
nicepun

Quote:

Originally Posted by sofarfrome

got my email from William yesterday and the board will arrive 4-11-07 via fedex ground. I am happy to get this board but 2-3 day shipping via USPS is less than $9, I paid $15.15 for fedex ground. Oh well, can't wait to get my grubby hands on this board

They must be using the same rates as ewiz....LOL
04-06-2007, 04:17 AM
erwinz

Quote:

Originally Posted by raju

Lol I remember that too, but it's an Oskar-esque board for sure, my guess is that they were either incorrectly informed or incorrect informers...:)

regards
Raja

hey raju, any results??? please share.. hehehe

..your all are lucky.. getting the board next week.. I'll be waiting for your results.. goodluck.. I hope DFI delivers.. :)
04-06-2007, 07:03 AM
cursivearmy1

Now how am I going to fit a HR-05 SLI on this beauty.
Also I seen pics of this board with 2x8800's on it, was modded drivers used for sli?
04-06-2007, 07:34 AM
Jodiuh

Quote:

Originally Posted by sofarfrome

got my email from William yesterday and the board will arrive 4-11-07 via fedex ground.

Where are you at? I'm only a state away in AZ, but unwilling to wait. I knew I should have ordered 2day from ewiz yesterday... :slap:
04-06-2007, 09:41 AM
PanteraGSTK

Quote:

Originally Posted by cursivearmy1

Now how am I going to fit a HR-05 SLI on this beauty.
Also I seen pics of this board with 2x8800's on it, was modded drivers used for sli?

When you figure out how to fit the HR-05 SLI let us know. This board seems to be the answer I've been looking for. I like my p5n-e sli, but I want to get the maximum fsb out of my cpu and I think this board will let me do it.:fact:
04-06-2007, 01:52 PM
nibble

Anybody know when this will hit Europe?, I just can't wait damn it! Not that it actually matters though as I won't have a CPU for it until after Intel price cuts. The waiting game is hard :(.
04-06-2007, 04:45 PM
ooeric

/waiting ............... still
04-07-2007, 10:33 PM
Raja@ASUS

500fsb 1m @ spd timings, in fast mode (set in dram timing page)..

http://img300.imageshack.us/img300/5579/500fsb1mjg6.jpg

higher multilpier with lower chipset latency gives similar if not better results, but this should let you guys who have lower multi locked cpu's know that it is possible to hit 500fsb for 1m, I will try for 32m too later..

regards
Raja
04-07-2007, 10:48 PM
Leeghoofd

Is this on a stock retail board Raju ?
Nice you are testing this one, you like it more than ya Striker ?
04-07-2007, 10:54 PM
theteamaqua

hicookie got banned i think
04-07-2007, 11:19 PM
Raja@ASUS

full retail board, it's less buggy than the Striker I had, all peripheral devices work fine, I checked lan onboard sound etc @ stock before trying any of this 500fsb or overclock stuff. Bios can sometimes hang upon pressing delete to enter, but you can always reset and try again, or using the latest beta hold down the home key, which retains all your settings but brings the fsb back to stock, so you go in and make adjustments without loosing your original timings etc..

here's a single 32m, still @ spd.http://img410.imageshack.us/img410/7...0fsb32mjt9.jpg

I will try for a dual run of 32m next..

regards
raja
04-07-2007, 11:35 PM
dinos22

speed looks good :toast:
04-07-2007, 11:36 PM
oohms

Quote:

Originally Posted by dinos22

i shot off an email to Taiwan

if they give me a go ahead i'll organise at least 7-8 boards...should have enough members at i4memory alone to cover that heheheh

That would be awesome :p

Just make sure you get the money first :D
04-07-2007, 11:42 PM
ineedaname

man that bench that hicookie has is nutz.....
04-07-2007, 11:43 PM
Raja@ASUS

ok dual 32m, still @ spd timings, all on auto in bios no ram tweaking, quite fast in dual too at the fsb...

http://img295.imageshack.us/img295/6...dual32mgz6.jpg
04-07-2007, 11:44 PM
dinos22

:eek: FAST!!!
04-08-2007, 03:36 AM
dice

raju did you need to change any chipset voltages to achieve 500FSB ?
04-08-2007, 03:59 AM
ziddey

I'm getting ready for the new badboy. Got the latest beta bios on my usb stick ready to go. latest drivers for a fresh install. Looking at the latest bios shots.. ohhhh man. all the options I thought were needed are there!! options to possibly remove cold / warm boot symptoms. looks like it may require some tweaking to get things right, but that's fine
04-08-2007, 04:10 AM
Raja@ASUS

Quote:

Originally Posted by dice

raju did you need to change any chipset voltages to achieve 500FSB ?

Hi, it's quite surprising that around 1.5vnb set in bios will allow boot and bench upto around ddr1050 at 500fsb, depending upon components and cooling. I did place a small akasa 40mm fan over the stock heatsink, idle is around 30 degrees with load sub 40, bearing in mind the motherboard is on a table top in a very well ventilated room..

Vdimm thus far I have used around 2.35v for the 500fsb stuff, just to keep things conservative. Ram does run a tad hotter on this board due to the increased drive strengths that Oskar is renowned for.

Please bear in mind I have not benched 3d yet @ 500fsb, I will have to wait until I swap out the board into the other rig with a 8800gtx. I will have this board under phase/cascade eventually, just wanted to get some air stuff done so people could get a more realistsic feel of what a good board/ram and cpu can do with DFI's latest offering.

Regards
Raja

Show 100 post(s) from this thread on one page