But when you want use SLI mode, you must put card into 1 and 3 slot ;)Quote:
Originally Posted by Eddy_EK
In this case - there is no problem.
Second slot is for physics mode.
Printable View
But when you want use SLI mode, you must put card into 1 and 3 slot ;)Quote:
Originally Posted by Eddy_EK
In this case - there is no problem.
Second slot is for physics mode.
SLI is really irrelevant because the southbridge chip is underneath the video card in slot 1; slot 1 must be used even in non-SLI configurations.
However, I can't order from mips-computer.de in the United States. I get an error that says, "Versandkosten noch nicht erreicht" which basically means they don't ship to the USA.
Has anyone in the USA found a water cooling solution for the southbridge chip for the EVGA 680i motherboard?
Try to send them an email maybe?
That set for my Striker looks nice, but a bit expensive!! €154!!! gees, thats almost half the board...
Quote:
Originally Posted by Solarfall
Thanks for the infoe Solar!!! Gonna order!!!
Regards.
Damon
Anyone knows how long it takes for someone in US to get that block?
2years
more like a year and a 6 months but close
i let you know how long it takes when mine comes
Quote:
Originally Posted by OdiesMule
The answer is yes, but it unfortunately won't work if you use full covered video blocks. Discussed before. Search.
i dont think the SB needs to be WC, just the NB. I use evercool VC-RE for my south yah yah i already added more fluid to the t line - - and i also just orderd the Ek G80 block so ill be waiting too lol
http://home.mn.rr.com/urumi/Picture%20020a.jpg
Nice.
Eddy outdone him self.:woot: :woot:
I got my EK8800GTX Block on the 26th. I live in California and it was shipped from Eddy in Slovenia on the 13th. I installed it last night and preliminary results show that it KILLS the DD fullcover block I briefly owned :banana: I must say the EK block is hard to beat. A much nicer block by far in performance, price and of course looks. I will try to get some pics up soon. Good Job Eddy!
@ Pen3
What water additive are you using?
Is it UV reactive?
I think it's some kind of strawberry lemonade :p:
its Blood!!!!!!!!!!!!!!!!!!!!!
for those that remember my blood thread.
Its from Petra and not UV http://www.petrastechshop.com/loliredcoad.htmlQuote:
Originally Posted by SP1
Dear Eddy_EK
I'm come from Hong Kong , and I want to order your block to Hong Kong , as I read your site SHIPPING POLICY , can I use DHL ?
EK-FC8800 GTX
http://ekwaterblocks.com/shop/produc...8d6360ce919dfb
Fist I had one question , is the block also had G1/4 plug with O-ring 2pcs included ?
Is it had stock now ?
Thank you
Vincent Kwok
Receive two of these GTX EK-WB, I will test soon with a Corsair Nautilus 500.
Congrats to Eddy from EK, very reactiv for responding email, beautiful blocks, the best price on the market, all the necessary stuff is in the kit. Took me 10 minutes to leave the original HSF and replace with the block. The most difficult part is to leave the HSF, the rest is finger in the noise.
The south Bridge DOES NOT need to be WC'ed.
Why not ?
I have an VC-RE on mine at 50% fan speed and it doesnt even get worm lolQuote:
Originally Posted by noobzed
VCore 1.6 SPP 1.55 MCP 1.7
Send an email to Eddy, he will reply very quick.Quote:
Originally Posted by vicentk
edvard.koenig@gmail.com
Thank's ZeusQuote:
Originally Posted by Zeus
I just send a Pm and E-mail to he already .
My 8800GTX is very hot , this picture is one of LED cable which is touch on HS .
http://bbs.ocqq.com/attachments/foru...aDG68nWuWa.jpg
So I need a water block a.s.a.p
omg thats really nicelly barbacued wires yammy :slobber: :eek:
OMG, that's seriously burned!
I'm sure you won't regret buying from Eddy. ;)
Silverado, what kind of temps are you getting? What kind of temps were you getting with the DD block?