my xp1700 DUT3C JIUCB 0251 clocked 2200mhz before now it's stucked at 2000mhz or less.. Im thinking of change my computer to a P4 2.4ghz Server :P (My english sucks, no comment). :/
Printable View
my xp1700 DUT3C JIUCB 0251 clocked 2200mhz before now it's stucked at 2000mhz or less.. Im thinking of change my computer to a P4 2.4ghz Server :P (My english sucks, no comment). :/
mine too ;) f**ckin' german school english ;D
Welcome to XTREME zac* !!
thx #:)
I have something interesting to add about stability. My 2100+ can do 2,15 GHz (13x166) and run everything (Prime 95 for 16 hours, Super Pi, Hours of newest games, all programs I tried) stable except one single thing. Can you guess? Probably not so I'll just tell you.
It's Quake 3 Arena. Thats right, Q3A! All other games work just fine for hours but Quake 3 crashes in a matter of minutes. Doesn't crash if I run at default speed or even at 2,0 GHz, so it's definately due to overclocking.
As for 1700+ L (1,5V) chips. I bought one for a frined and It didn't do all that well, althoug not that bad either. 2,08 GHz (12,5*166) at 1,65V Prime 95 and Super Pi stable, but at 2.15 (12,5*173) at 1,70V it fails Prime 95 after 5 hours so It would probably need 1,75 for 100% stability.
It was a:
<img src="http://users.volja.net/lukaakul/images/AXP1700pL01.jpg" border="0"/>
hmmmm nice to see this, I was just planning to order a 1700+ with the same core as yours @ www.funcomputer.de :banana:
how many volts on your mem?
Mem was at 2,7V, normal timings, which is very conservative. Someone else over at our forum in Slovenia bought a:
AXDA1700DLT3C
JUIHB0308XPMW
9741497250276
And he's doing 2,15 GHz (13x166) at 1,55V and 2,34 GHz (13x180) 1,6V everything Prime 95 Stable for more than 10 hours. Now that's some CPU!
:slobber: :slobber: :slobber:
My AIUHB 0249 2400+ will do 2.57GHz, but only at 2.1vcore and 30C! :brick:
...Not the worst clocker though... @ 2.33GHz 45C load now...
..MCX462+ is definitely a good HS...
Some undervolted, aircooled* results :
2105MHz @ 1.4V (1.44 MBM) :
SuperPI 4M :
*SK6 & Delta 38@7V
nice, but would you mind moving the results over to the right a little more...;)
I can do a bit better than that, with my 1800+ ;)Quote:
Originally posted by AtaStrumf
Mem was at 2,7V, normal timings, which is very conservative. Someone else over at our forum in Slovenia bought a:
AXDA1700DLT3C
JUIHB0308XPMW
9741497250276
And he's doing 2,15 GHz (13x166) at 1,55V and 2,34 GHz (13x180) 1,6V everything Prime 95 Stable for more than 10 hours. Now that's some CPU!
1800+ DLT3C 9875406252802
JIUHB 0310 MPMW
1.5v = 2170 MHz
1.65 = 2370
1.725 = 2450
1.78 = 2500
1.825 = ~2530
http://koti.mbnet.fi/hnygard/sekalaiset/2525.jpg
Quite nice with low voltages, even if I say it myself.
That's kindda strange.... 2.15G/1.55V and it needs only .05V more to run a whole 200MHz more?!?Quote:
Originally posted by AtaStrumf
Mem was at 2,7V, normal timings, which is very conservative. Someone else over at our forum in Slovenia bought a:
AXDA1700DLT3C
JUIHB0308XPMW
9741497250276
And he's doing 2,15 GHz (13x166) at 1,55V and 2,34 GHz (13x180) 1,6V everything Prime 95 Stable for more than 10 hours. Now that's some CPU!
Weird :confused:
I wouldn't complain hehe :) sounds good to me :)Quote:
Originally posted by TodB
That's kindda strange.... 2.15G/1.55V and it needs only .05V more to run a whole 200MHz more?!?
Weird :confused:
Well about that only extra 0,05V for 200 MHz. The guy gives exact readings of the voltage and not the voltage set in BIOS and the exact voltage is 1,63V at 2,35 GHz, so I concluded that that must have been 1,6V setting in BIOS (if it were my board, that would have been exactly right), but it could be possible that his MOBO undervolts and the setting was 1,65V, but I doubt it.
The latest from that proc:
2418 MHz (13 x 186 MHz) @ 1.7 V 45C on Volcano 7+ (full RPM), stable Prime 95 for 12 hours.
Its obviously reaching its plateau, since it took another 0,05V for just 78 MHz.
I think its just as good as yours Nyge. Have you tried OC-ing it with watercooling. 1.825 = ~2530 is a bit high for air right? Is that the absolute maximum, or do you think your chip has more to offer.
hiQuote:
Originally posted by AtaStrumf
Mem was at 2,7V, normal timings, which is very conservative. Someone else over at our forum in Slovenia bought a:
AXDA1700DLT3C
JUIHB0308XPMW
9741497250276
And he's doing 2,15 GHz (13x166) at 1,55V and 2,34 GHz (13x180) 1,6V everything Prime 95 Stable for more than 10 hours. Now that's some CPU!
see my sig
my 1700+ : ( wc )
AXDA1700DLT3C
JUIHB0308XPMW
9740977281170
it can do: (with prime95)
2150 @ 1.45v
2400 @ 1.65v (perhaps more?)
2620 @ 1.9v
2645@ 1.95/1.97v
I just got my 0310 WPMW in today. :) Right now its running Prime95 at 2.2ghz (10x220) w/ 1.63vcore (actual--its 1.6 in bios). Im on air cooling with an SLK800 and Smartfan2. Ill post back with my final results later tonight. :D
That sounds pretty nice, let's hope it doens't "hit the wall" anytime soon. :)Quote:
Originally posted by dykz34
I just got my 0310 WPMW in today. :) Right now its running Prime95 at 2.2ghz (10x220) w/ 1.63vcore (actual--its 1.6 in bios). Im on air cooling with an SLK800 and Smartfan2. Ill post back with my final results later tonight. :D
Those were my thoughts exactly! :toast:Quote:
BrainStorm -nice, but would you mind moving the results over to the right a little more...
Yes, I have watercooling. Watertemp is around 28C. Strange is that neither of my two 1800+ seems to like above 1.85 volts. Same thing with my 2100+. Don't know if something else is wrong, or maybe it's just the cpu's. I believe if I could set voltage to 1.9, 2600 MHz would be reachable.Quote:
Originally posted by AtaStrumf
I think its just as good as yours Nyge. Have you tried OC-ing it with watercooling. 1.825 = ~2530 is a bit high for air right? Is that the absolute maximum, or do you think your chip has more to offer.
Think i have to try more when I feel for it :)
Anyone play with a
JUIHB0310XPMW
9740977281170
I am currently playing with a JUIHB0310XPMW. It is running @ 2701Mhz at 1.9v as I type this. Looks like a definate winner!!
Man, I can only get mine to 2.44ghz. Is that good for air cooling? Any suggestions u can give that would allow me to OC further?
I believe without H2O or Promie cooling most people are getting between 2.4-2.5, so what you have going is right on target. Nice job!
http://www.cclcomputers.co.uk/
Ordered a chip here because I read on www.overclockers.co.uk that a user had recently bought a week 12 of 03 dlt3c xp1800. They have just had a new batch (judging by the awaiting stock to in stock change). However I cant guarentee anything but it will be an xp1800+ tbred. Taking a bit of a gamble with my £53.35 delivered.
Wish me luck!:toast:
Update on mine: Its running Prime stable right now @ 2383mhz (10.5x227) w/ 1.8vcore. :D (All on air still)