Gigabyte DQ6 at home :)

Quote:

---

Originally Posted by bachus_anonym

7950GX2 always works at x8, regardless of the mainboard. For the simple reason, that both PCBs on 7950GX2 are connected thru PCIe x8. Therefore, PCIe x16 connector (on the card) that is plugged in to the slot, becomes nothing else but PCIe x8.
NVIDIA has conlcuded it and many benchmarks had shown it before that - whether it's x8 or x16, it really doesn't make any significant difference. Previous 7900GX2 used x16 connector between PCBs and NVIDIA apparently noticed it was a waste :)

---

You're right! I just checked an old score of mine with the Asus 975X board and it runs also on 8X there
. I just don't understand what's going on with 965DQ6 - the 7950GX2 seems to be so castrated. Maybe only I have the problem - will be interesting to see OP can get the scores up.


http://img133.imageshack.us/img133/9808/21665bjh7.jpg

Quote:
Originally Posted by AcUaViVa
hello

you explain that 7950GX2 in the GIGA's is not supported

another user says that is supported but seems that only one GPU is working

whith F3 Bios the 7950GX2 it's FULL SUPPORTED? or not?

thanks

guess2098 says:

it is actually becasue the NV driver
it is not support with 965
need to wait for nvidia's new driver
there is nothing to do with motherboard
justbecasue nvidia's driver is not support 965

[ Allendale E6300 hits 501MHz FSB w Gigabyte 965P-DQ6!!]

http://vr-zone.com/?i=3848

Quote:

---

[ Allendale E6300 hits 501MHz FSB w Gigabyte 965P-DQ6!!]

---

Erm, I've seen you post this exact thing in three threads in a row...

Good news - I finally managed to get the 7950GX2 to work with F3a - CornerJack was right after all!!! :toast:

I also had problems, and now my mobo seems to go just great.

All on air (TT Big Typhoon)

http://img85.imageshack.us/img85/5952/post1zi4.jpg

Regards!

Hmm so it seems the DQ6 is playing nice with the 6600 and 6700! Good news!

Has anybode installed a Scythe Ninja cooler in DQ6? Or Tuniq Tower? Will the "crazy plate" (on the back of the board) go off easily?

DQ6 running a E6400@3g stock at the moment, 7950GX2 running perfectly with the F3g bios.

Vidax, Jazz, might I ask what your voltages are for FSB, MCH, PCI-E, Vcore, DIMM, at those nice overclocks (aside what is shown of course :D) I am having trouble with mine, stuck at 350x9 anything above that and prime reports errors almost immediately, then around 360x9 superpi reports errors, then above it will either not post or freezes before I log into windows.

Thanks!