420 FSB..
Hmmph.. I hope it goes higher once the BIOS fully matures!
I really want it to hit 450 FSB..!!
Printable View
420 FSB..
Hmmph.. I hope it goes higher once the BIOS fully matures!
I really want it to hit 450 FSB..!!
It may not be the board that's limiting his FSB, but rather the CPU or his cooling. As we all know, better chips will overclock higher. I think that's why he mentioned wanting a Stepping 5 Conroe.
hmm.... well id be happy with that overclock. 3 would be my goal. any thing extra would be a nice bonus.
my last opteron 165 was at 2.9 so 2.9 on that would be cool :)
hey ! good to hear that Webwilli and thx to share this info :clap:Quote:
Originally Posted by webwilli
Still waiting for that board to complete my rig .
Asus boards seems to have pbs with usb 2 ,since I noticed usb 2 issues with my current rig ( AMD 3800 x2 , asus A8N sli )
+1 TVdang7 with 3ghz
I can't wait to see this board with a great OCing chip! I have high hopes for this board because I definitely have my eye on it! I guess I can wait for Sierra to review his. :p
Quote:
Originally Posted by Mykou
:) well see
Ok so you need help!! 2 x 6600? I can help test one :)Quote:
Originally Posted by eva2000
How about lowering the Multi by 1, and pushing the FSB to the Max. to see how far the board can go?
Please do it, for us :D.
I want to but a E6300, how much will it cost?
nice chip
Sierra... not sure if you have mach or vapochill... I think mach II GT's 937 firmware fixes that issue not 100% sure... if vapochill, I don't know if there is solution... for froster, I know Golden Eagle is working on to add bit of delay before shutdown is triggered... (I asked him for 15 seconds to be on safe side) as well as few convenineces :)
My Vapochill is two years old. It uses the old Chill Control. Haven't really checked for firmware updates. Even a ten second delay would be helpful. The PSU usually will shut off for about three seconds before restarting after BIOS change.
I'm testing outside a case, so adding a second PSU for the SS controller is not a major headache.
Quote:
Originally Posted by tvdang7
Wow just saw Gorod's results with his 6300 ES @3.1 ghz on air !! :slobber:
I can't wait for my board to come aaahhhh
it's just insane to o/c such a chip , Intel performed very well its power/watts lol
Yep, E6300 is my way to go before Kentsfield :)
!?!?!?!?!?!?!?Quote:
Originally Posted by -Blaze-
Great day ! My resseller told me that my board was sent and will be here in few days
Expecting to receive before the week , so nice they really had them in stock !
:banana:
Someone in another thread had asked whether the Vapochill clamshell will fit on the P5W DH Deluxe. The answer is yes, quite easily. I tried doing some testing. But it's so hot and humid today that I stopped after pushing my CPU up to 4100MHz. Was getting ice build-up around the socket, even with extra fans blowing on the board. Not what you want to see. Will try again later.
http://img394.imageshack.us/img394/1586/img06371rg.jpg
http://img464.imageshack.us/img464/3934/41003439ru.jpg
Would 450fsb be possible with E6300 and P5W DH dlx or 975X Bad Axe without any mods?
MCH vmod might be needed to get that high. If you can afford it I would recommend getting a Conroe with a higher multiplier. Would save you from having to reach high FSB.
are the temp monitors accurate on this mobo?
I believe AiBooster is fairly accurate with air-cooling. It doesn't seem to read sub-zero temperatures very well. I hope I wasn't running at 242C. :eek: :D
sierra_bound i have seen you @ abxzone right ? anywayz my question was i have also order a p5w dh... i wanted to know was, will it be possible to have 400fsb to do 1:1 with my 800mhz ram with E6600 processor... ?
i||uSi0n^
Yes, I am that person though I don't post there anymore. :) 400FSB should be doable without board mods.
yeah i seen that..tho donno if u remember me ? :)
anyhow must i mod. to be able to get that much of fsb? cause i dnt really want to do it...
i||uSi0n^
Vmch mod it and give us some "real" results ;)