Very good!
Printable View
Very good!
Also got black colour of backplates. :yepp:
http://ld-phasechange.com/images/backplates/5.jpg
regards
looks good, but honestly, why boughter make 2 colors? :)
Diferent colours at one place :yepp:
http://shrani.si/f/3D/Ca/1QBbQ53P/picture201.jpg
Regards
thats nice man, especially the white one :up:
Thanks my friend ;)
Regards
SS with ''carbon'' case will be finished really soon. Waiting for some black screws and some other stuff.
http://ld-phasechange.com/images/SingleStage/no.5/1.jpg
http://ld-phasechange.com/images/SingleStage/no.5/2.jpg
http://ld-phasechange.com/images/SingleStage/no.5/4.jpg
Best Regards
Carbon case is really awesome!
Hey man thats neat. Is it sticky backed vinyl? Or actual carbon panels? How easy is it scratch or come off, compared to normal paint?
tophertony:
it's vinyl,
littledevil:
nice and clean as allways my friend :)
regards
Tim
New unit with Aspera compressor:
http://ld-phasechange.com/images/snollocer's_SS/3.jpg
http://ld-phasechange.com/images/snollocer's_SS/5.jpg
Regards
great work wonder what temps they get with the new compressor and also have or do you make that new unit with all hardware needed to just hit power on it and then it will start pc when temps are ready?Quote:
Originally Posted by LittleDevil
and at what coat do they run in the USA.
please show side with condensor inlets
it looks the same with one inlet and outlet, you have to make the 90dgr bend your self. looks exactly as the rivacold condensers from the side or unseen condenser (cube).
220w = what cpu speed and volt using a q6700 g0 or q6600Quote:
Originally Posted by LittleDevil
I have a unit with almost identical, same compressor, same gas, but another condenser but with same capacity, holds a QX9650@461x9 1.525 Vcore@ ~-38*c measured with K-probe.
cheers
Tim
what type of controllers do you use now?
Eliwell EM300 Thermometer with NTC probe is that in the last pic if I'm right??
tim- thanks for the info but i actually was referring to which controller LD uses.
so the question still stands.
Hey,
little devil i think you forgot me:P you missed sending me the mounting with my gpu evap. could you send it please?
ill show some pics today of the unit ive done with moc :) ( autocascade )
@mike8913: Like Moc said; Eliwell EM300
@Xtasy: Sorry but I completely forgot, I will send it this week.
Regards
thx no problem :)Quote:
Originally Posted by LittleDevil
Hey LD,
its been silent for some time again... can you please get back to me on PM or MSN asap.
thanks.
can't wait see how the new unit cools a quad
White unit with white sleeving: :p:
http://ld-phasechange.com/images/SingleStage/no.1/8.jpg
http://ld-phasechange.com/images/SingleStage/no.1/9.jpg
http://ld-phasechange.com/images/Sin...ge/no.1/10.jpg
Regards
And finished stronger unit: I really like that compressor, it is running way more silent than Electrolux MP14FB.
Temps @ 240W load
http://ld-phasechange.com/images/snollocer's_SS/17.jpg
Finished unit:
http://ld-phasechange.com/images/snollocer's_SS/18.jpg
Kind Regards
What compressor have you used?
Aspera NEK 2150GK.
Regards
Great Unit!
It handles 240w at the same temps like my NL11F unit handles 215w :)
Maybe you could pm or icq me what an upgrade costs. =)
Best Regards
Dennis
Carbon one is finished:
200W:
http://ld-phasechange.com/images/Pascal's_SS/1.jpg
http://ld-phasechange.com/images/Pascal's_SS/2.jpg
225W:
http://ld-phasechange.com/images/Pascal's_SS/3.jpg
http://ld-phasechange.com/images/Pascal's_SS/4.jpg
240W:
http://ld-phasechange.com/images/Pascal's_SS/5.jpg
http://ld-phasechange.com/images/Pascal's_SS/6.jpg
http://ld-phasechange.com/images/Pascal's_SS/7.jpg
http://ld-phasechange.com/images/Pascal's_SS/12.jpg
http://ld-phasechange.com/images/Pascal's_SS/14.jpg
http://ld-phasechange.com/images/Pascal's_SS/20.jpg
Regards
wow..dude that thing looks incredible!!:up:
Very nice work.
looks very nice, I like this carbon stylish, :up:
Why not use black bolts for sidepanels and fit the hood as well? ;)
@tim: Because i'm still waiting for them.
Regards
aah, i thought you got them since you have black ones on fan mesh.
regards
Tim
They are different, those are for fans:)
Regards
Wow!!! Looks as good as, if not better than the higher priced PC cases that are manufactured by the big buck companies. Very nice work indeed :up:
Just curious, what kind of pressures do you run when seeing 200 Watts of heat load?
Unit without case, it will be great for benching.
http://ld-phasechange.com/images/Norz's_SS/4.jpg
http://ld-phasechange.com/images/Norz's_SS/5.jpg
http://ld-phasechange.com/images/Norz's_SS/6.jpg
http://ld-phasechange.com/images/Norz's_SS/7.jpg
Best Regards
nice work with some super b quality [as usual] & one question .Quote:
Originally Posted by LittleDevil
You start from 200w showing the voltcraft wattage meter and after your uei dt-200 under the load .
at the last voltcraft pic you show us some 240w load but at the uei dt 200 photo under load the voltcraft [at the corner on the same pic] shows 180w. :confused:
@Athens[2004] on the last picture is power consumption of second unit without any load.
Best Regards
@225W load:
http://ld-phasechange.com/images/Norz's_SS/10.jpg
Regards
jeeze beutiful!
athens, nice find XD i would have never noticed that. I believe you however LD.
And LD, when did you get the flulke 52?
Regards
And 240W temps:
http://ld-phasechange.com/images/Norz's_SS/11.jpg
@teyber: I got it from USA.
Regards
Suction line is kind of short if this should be intended for benchmarking.Quote:
Originally Posted by LittleDevil
http://ld-phasechange.com/images/Pascal's_SS/6.jpg
Easter egg photo. 180W while claiming to be 240W load :)
@tiborr: Look that post: http://www.xtremesystems.org/forums/...&postcount=440
If it's problem that you don't belive me, i can make a video and you will see temps and load tester from 0W to 240W
Best Regards
You can start downloading, temps are even better with little tuning and that unit is the same as last time ;)
http://ld-phasechange.com/images/Norz's_SS/ss.WMV
Regards
that flex is proberbly enough. of course it depends on how you run it, with a 200mm high benchtable it's a bit short but i guess thats not the situation.
nice capacity and temps there LD :)
LittleDevil @ Thnx for the explanation , :) theres no need to open the Video , i believe you [ if I dont , I wouldnt ask you ;) ]
..hm, that looks like mine unit..lol... Nice tuning LD, idletemps means nothing, load is everything:DQuote:
Originally Posted by LittleDevil
You are the master of perfection,respect.......
Idle temps are about -50°c, you can look video too;)
Regards
That isnt real carbon fiber is it? Looks like vinyl to me.
it's vinyl no question about it. LD has also mention that.
Superb work my friend :clap: carbon look is very nice :up:
Well done my friend. :up:
Best regards,
DagoDuck
Hey littledevil, a "simple" question. Would it be possible to chrome the compressor? Would look so damn nice under some blue lightning in a silver V2100
case.
painted compressor means no warranty, but for sure, it's no problem to paint it with "chrome".
but i wouldn't recommend v2100, to small airflow true the front since you have the door in front. v2000 is a better choise.
regards
Tim
Yeah, thats true about the V2100.Quote:
Originally Posted by tim-
I was actually thinking of real chrome plating, would that be possible? I mean, painting with "chrome" is a bit "tattigt" ;)
i don't think so. since the method to make the crome can cause issues for the sealing between electrical socket and shell.
if you want to make it "chrome" either paint it or polish it and clearcoat. to be honest, I would keep it black.
Course, I'm simply brainstorming a bit :)
You could chrome it if you make sure to cover the electrical plug with wax. And make sure you don't get acid in the compressor.
Nice Work :up:
Nice work, clean and sleek.
:D
Thx LD....
Next stop for that nacked SS is Norway.
Cant wait to test it, i know it will perform good.
You are a true master in youre profession, be proud of it :clap:
--cheers--
Very well done. What kind of model is this compressor? :)
Looks like that one is going to be built to your same high standard !
I'm just curious. those condensers is rated for 700watts, and what rotarys do you use?
what loadtemps do you expect?
well I have to say, I'm very happy with the size of those rotary cases (i got two my self without the gauge and controller holes).. but it's enough space to build autocascade in there, and I will build one for my self (already in progress). might try that instead?
regards
Tim
It looks like a LG NJ282P R-407C or LG NJ236P R-407C compressor.
I thought LG's had much smaller accumulators... but that logo sure looks lg.Quote:
Originally Posted by DagoDuck
nice work ld!
teyber:
it also depends on refrigerant ;)
New backplate issulation for SS and POTS.
http://ld-phasechange.com/images/issulation/1.jpg
Regards
Hey LD,
i still need the GPU Mounting ;)
@Xtasy: PM me your details please.
Here are some pictures of finished unit.
@250W load.
http://ld-phasechange.com/images/bre..._rotary/10.jpg
http://ld-phasechange.com/images/bre..._rotary/12.jpg
http://ld-phasechange.com/images/bre..._rotary/13.jpg
http://ld-phasechange.com/images/bre..._rotary/14.jpg
http://ld-phasechange.com/images/bre..._rotary/15.jpg
http://ld-phasechange.com/images/bre..._rotary/16.jpg
Regards
the controller looks a bit crooked :shrug:
It is not, just strange view. :up:
regards
godmod, that was noticeable to me also. :D Could you make a few pictures from the inside, LittleDevil?
Do these SS units make a lot of noise?
Not sure if you meant LD's units... or just single stages in general.Quote:
Originally Posted by S1mon-
Either way, the loudest part is probably going to be the fan on the condenser. The compresser in a single stage is usually just a low faint hum.
Rotary unit is pretty loud, compressor is louder than fan.
NL11F units are quiet, we can say that fan on condensor is louder than compressor. ;)
Regards
Ok, finally after like 3 weeks, Norwegian Toll/customs released this package from LD.
I have been waiting, and waiting..lol
But, it was so worth the wait, the unit described in earlier posts here is simply awesome:D
LD has done a very good job in finetuneing this little SS.
Im goona use it for my Xeons (3060,3070 and X3220 quad)
From what i have tested so far, it seems like i can run my quad easy on 1.65vcore 2 cores, have not tested load on 4 cores yet, only fast wprime.
I have a G0 quad, possible they runs cooler than other not G0 chip.
Because i got good temps, almost too good, so i wanna test with another tempmeter before i give temps here. And run wprime and 3Dmark 06 cputest
Also mine C2D Xeon 3070@1,635vcore was flying under this SS.
Have a pic of a fast suicidescreen 2 hours ago, i was having no problem benching pi, pifast, wprime on 1,635vcore 1 and 2 cores enabled, only a few celcius different from 1-2 cores.
I need test some moore, and find the limit on this SS, so far its looking really good. Im very happy so far.
Thanks LD:cool:
--cheers--
MB used is Asus P5K vcore, vdroop and vdimm modded.
Crucial PC8500 Ballistix@2.4vdimm
ATI pci VGA
Seasonic 700w psu
Benching unit
http://ld-phasechange.com/images/Cupra's_SS/1.jpg
Almost 250W load:
http://ld-phasechange.com/images/Cupra's_SS/2.jpg
Temps on 247W load:
http://ld-phasechange.com/images/Cupra's_SS/3.jpg
Finished:
http://ld-phasechange.com/images/Cupra's_SS/5.jpg
http://ld-phasechange.com/images/Cupra's_SS/6.jpg
Regards
Really nice Norz, we are waiting or more results ;)
Regards
do you run 507 or 402 in those units?
I see you keep pictures of naked men in your workspace. Is that your inspiration for the nice looking units you build?
LOL:D :D , my sistem put that calendar there, i didn't notice it before :ROTF: :ROTF:Quote:
I see you keep pictures of naked men in your workspace. Is that your inspiration for the nice looking units you build?
Regards
ales, nothing wrong to have "a thing" for boys as well ;)
but you didn't answer my question, r402 or 507? ^^
@tim: ;)
And gas is R507.
Best Regards
Incredibly nice job Little D.
yea absolutly.. thumbs up for you :up:
another result with ss by LD :
Cpu-z Maxscreen: 5028Mhz at -43,6°C :D
Cpu: Intel Pentium D 915
Mobo: Asus P5WD2-E Premium
Thanks LittleDevil!! :up:
http://wawabob.free.fr/images/o-c/d915/Cpu-z_5028.png
Great job there ;)
Another Single Stage Carbon Edition ;)
http://ld-phasechange.com/images/Aur...#39;s_SS/2.jpg
http://ld-phasechange.com/images/Aur...#39;s_SS/5.jpg
http://ld-phasechange.com/images/Aur...#39;s_SS/6.jpg
http://ld-phasechange.com/images/Aur...#39;s_SS/8.jpg
http://ld-phasechange.com/images/Aur...#39;s_SS/9.jpg
Regards
This one is a true beauty!
Very nice unit, but a bit of a mess around the head's braiding ?? :o
I am sure that he puts neoprene tape around that whole end because the slit in the tube foam is still visible.Quote:
Originally Posted by yngndrw
Quote:
Originally Posted by yngndrw
I need to do load test before i finish it. ;)
Regards
200w load:
http://ld-phasechange.com/images/Aur...39;s_SS/10.jpg
245W load:
http://ld-phasechange.com/images/Aur...39;s_SS/11.jpg
Regards
looks very good
when will you try something new? :p
How long is the capillary tube, which you used in the unit? Which diameter? Which pressures do you have? Static pressure? Refrigerant?
THX
Gas is R507, other specs are TOP secret :DQuote:
How long is the capillary tube, which you used in the unit? Which diameter? Which pressures do you have? Static pressure? Refrigerant?
THX
Regards