hard to say Athlon64OC. Not familiar with that stepping, but most all of the 06's are getting to 2600+ on air afaik.
Printable View
hard to say Athlon64OC. Not familiar with that stepping, but most all of the 06's are getting to 2600+ on air afaik.
I'm very sorry for you and I want you to know I'll think of you the next few day (if I was religious you would be in my praires).Quote:
Originally Posted by stone_cold_Jimi
I wish you a lot of strenght,
Jochenp
in order to update the list :
I also wish you a lot of strenght, and yes, i'm relegiousQuote:
Brechtvm LDBHE 0601 FPMW - cooled by ThermalTake Big Typhoon - 1.4250 (on DFI Ultra-D)
you forgot mhz?Quote:
Originally Posted by brechtvm
condolences, man....lost my father on Feb. 24th, and my Grandmother on April 4th. not a good year...prayers for you.
that being said, currently trying to oc a LDBHE 0604 CPMW on air.
will let you know.
dave
I finaly got my new mem (2x1gb g.skill extreme hz) to replace my dead ballistix :( and decided to take my 0601 for a spin.. solid at 2.55ghz on stock voltage 1.325 x 104% .. i'm going to play with my mem and see where I can take it.. it's a T chip (0601 fpmw) so I was told it would perform better under water but I havent completed purchasing my parts yet.. still running it in a p180 under a si-120 panaflo m1a 120mm fan.. idle 29c load 36c..Quote:
Originally Posted by Jester FPS
how high should I risk taking it up with some more voltage?
I think my cpu died :(
Stone_Cold_Jimi
Post #188 in the other x2 thread I had my LDBFE 0607 TPMW prime stable at 2.8 Ghz small FFTs 1.488v and custom blend 8 hrs primed 1.504v. Custom seemed to need a bit more juice
Kind of trivial info taking your news into account. My father is terminally ill with cancer, and I see my mum back in the UK very rarely. I feel for you man and my condolences.
RLM
Just changed my config to an Ultra-D from expert. Was quite optimistic of a better OC given that my x2 required less juice on my Asus premium than the expert. Exactly the bloody same though. Darn it!
Running Tmod 406 just for ref.
Can't believe I'm :banana::banana::banana::banana::banana:ing about 2.8 ghz. :D Envy and addiction.
RLM
Many many thanks for your condolences guys; my mum had been diagnosed with an inoperable brain tumour on 6th January and from then she basically partied as well as she was able until about four weeks ago, bless her. Most of the grieving happens as the symptoms worsen and the person you knew "disappears" or changes beyond recognition as suffering and anguish kick in, so the end is in many ways merciful.
My sympathy to those of you with ailing parents and relatives or recent family losses, I know that pain.
On with the show - I'll update the list later today and try to include any relevant info from other threads; I have to say, being given it all on a plate in one line is luxury brechtvm ;)
ok, for your enjoyment. learning some lessons from last time. :)
http://www.flickerdown.com/forsale/0...x245_thumb.JPG
Here's the link to the larger version: here
the A8N32-SLI overreports voltage.
thanks,
dave
Well, when I was priming last night my system locked up, upon reboot I got the dreaded 3 LED lights, looks like the CPU is dead, tried an overnight CMOS clear and that didn't seem to help...
i FINALLY found someone with the same stepping !Quote:
Originally Posted by ju1ce
is it alsa a LDBHE revision ?
LDBHE 0601 FPMW ?
hits here 2,6 Ghz @ 1,4vCore..
greatest problem = heat !
(need to cool it down..if i let it go above 50°, i get errors...)
is it possible to show me a picture of your cooling ? because i dont know 'bout which cooling you're speaking :s
sorry for your loss :(Quote:
Originally Posted by stone_cold_Jimi
To make updated the list easier for you:
Quote:
lawrywild LDBHE 0602XPMW T 2.7ghz 1.55v (BIOS) under XP-90C
lawrywild LDBHE 0602XPMW T 2.6ghz 1.425v (BIOS) under XP-90C
are you being serious? if so, im really sorry to hear that... :(Quote:
Originally Posted by stone_cold_Jimi
stone cold Jimi you have my condolences on the loss of you're mother,my mother in law was diagnosed with a brain tumor in Aug/06. Thankfully she had an operation and radiation treatments and today is better than she has been the past couple of years!
I am recieving a 4200X2 LDBHE 0606BPMW "N" tomorrow,
would it be appropriate to post reults in this thread?
I was going to buy a 3800X2 however this 4200 was just too good of a deal to pass on!
Thanks for your thoughts mongo. Your new chip looks interesting, but it ain't a 3800! However, I'd love to see your results in the Official x2 OC thread - good luck with it.:DQuote:
Originally Posted by mongo
yep yep! i'm also quite happy to see someone else with the same cpu.. I searched all over locally for a decent stepping and found only 1 0601 and it was the fpmw which for the life of me i could find no refference to online. Since everyone said 0601s in general were decent I took the plunge and i'm much more impressed with it over my older toledo 3800+ x2..Quote:
Originally Posted by brechtvm
I will take some pics today of my setup.. The temps are pretty high on this chip for just being stock voltage and a decent overclock.. my toledo needed like 1.5v to reach 2500mhz this one does better at 1.35 .. I would definately like to see it under water at 3ghz though :)
Dunska LDBHE 0606APMW N 2.66ghz 1.3v (BIOS) under TTBT
What is TTBT?Quote:
Originally Posted by Dunska
Thermaltake Big TyphoonQuote:
Originally Posted by Jester FPS
dave
update: LDBHE 0606 EPMW T chip 2800 @ 1.425 still on stock non-heatpipe hsf.
i got a x2 3800 0607 SPMW on the way, ive only seen 2 others with same stepping ...ill post results when i got it running. any comments on this stepping?
One of mine is LDBFE 0607 SPMW, currently running with a stock 4600+ HSF at 2700 / 1.392v. It actually bested my 4600 at 3GHz on phase by running 1.47v against 1.5v. Good luck, hope it's as good. :up:Quote:
Originally Posted by a5h
Jim my condolenses..may God bless you and your family....and thanks again for accumulating all the X2 OC data! Wish there was something similar with Optys!Quote:
Originally Posted by stone_cold_Jimi
wow dude hate on me cause i have a 4200+
cant be a member of the 06 manchesters?
@ ady1989 & ST4, thanks guys.
Feel the wub <3 lol - thread title says 3800, don't want to mislead anyone. Still want to see 4200 results, in the appropriate place. There's a much nicer table for those in the x2 OC thread, my 4600 results live there too. And it's a sticky. So don't feel bad. :DQuote:
Originally Posted by BrokenWall
Booted Out the Box @ 2.5Ghz Stock Vcore
Stock Vcore Prime Stable Up To 2.8Ghz
2.5Ghz @ 1.4v PRIME OK
2.7Ghz @ 1.4v PRIME OK
2.8Ghz @ 1.4v PRIME OK
2.9Ghz @ 1.5v PRIME OK
3.0Ghz @ 1.6v PRIME OK
If Sure With better cooling this will Crack More, My Phase arrives Tuesday so may try it then if he lets me.
http://img316.imageshack.us/img316/9...0x23ghz2tq.jpg
Would Run longer but this is a friends chip and he needs the rig together on his Asrock Board. Shame considering the Chip Will be run at Stock.
Double Post
Just out of curiosity, is that an "N" or "T" chip? I am betting "T". Also, is 1.55v safe for a "N" chip 24/7?
Ill have a buchers 2mora mate as its in use, Its gona be run stock as its a friends Chip. Shame tho cos id like it :cool:Quote:
Originally Posted by madgravity34
TBH it passes prime @ 3Ghz 1.52v but it needs 1.6v to pass when the temps get up as my room is a sauna.
Good Old Camra, Early pics i took.
http://img223.imageshack.us/img223/1...420copy6lt.jpg
Another Run @ 2900Mhz
All In the Pic Below mate, Needs a big jump to be stable at 3Ghz which inst worth it. Below is rock Solid.
This was after a 24HR Burnin, Ill adjust and test for lower Vcore.
http://img88.imageshack.us/img88/271...runcopy0bj.jpg
Thats a pretty decent chip. I am seriously considering getting an expert, what do you think? YOu like it?
Oh yeah mate i like the board. I get a little paranoid when i read all the scary posts like it killed this it killed that. But there must be thousands of these board out there and the odd bad thing is bound to happen as it does with all boards.Quote:
Originally Posted by madgravity34
Ive not had one single issue and ive had a few boards as i build systems for friends. Its solid however it really does hate TCCD mate. 3 sets and all sucked on it.
Altho u Have a Ultra-D, Not sure if its worth the move altho we all love new toys. ;)
Another Quick blast and it seems better after the burnin. Altho its getting too hot, id remove the IHS but it aint mine
http://img134.imageshack.us/img134/3...st20min3fw.jpg
Hmmm.. After killing my DFI NF4 ultra -d I ordered a new one, but now as I have installed the new board, my X2 needs 1,408 V (CPU-z and ITE reading) to run 2,95 GHz, whereas it used to do 2,95 GHz at 1,376 V (Again CPU-z and ITE reading). But in both cases I used 1,425 V in bios.
So have the chip really got 1,425 V even with the old mobo, and that the old mobo just were reading wrong?
Sorry for the english :(
I supose that could be the case, the other board could have been reading it wrong. Ive read many times that the readings differ with different boards.
Actually the Expert is a prime example, its way off reading Temps some worse that others.:rolleyes:
*bump*
well i went to london and got a LDBHE 0605, still deciding on a HS/Fan that will get this baby to 2.6 - was thinking about the TT Big Typhoon. Looks pretty heavy though.
can anyone recommend a low noise, light but powerfull cooler (Air) ?
2600 1,328V 46°C Full load with TT BT, is this normal?
pretty hot i think....
KingRoLo, you will probably get to 2.6 with stock cooler. The TT big typhoon will probably get you a good bit higher.
well I picked up a x2 3800 (LDBFE 0610 UPMW "T chip") I haven't seen anything on it, so figured I'd post up my findings. So far its survived a bit of prime and some 3d as well @ 2600 with 1.38v ... idles 25C and load 36 (XP-90c with tornado) I'll throw some pics up later.
@KingRoLo last four letters and N or T and your cooling please m8 when you get to it thanks. :)
@drunkcarlos welcome to the forum and thanks for posting, love to see how far that baby goes. :up:
@ Kingrolo, my friend uses the Arctic Cooling Freezer 64 Pro which i think is good and very quite.
@the Joker, I think thats about right mate the one my friend uses on air is around 43oCat 2.6 stock vcore.
@ Stone_Cold_Jimi, Good work on keeping this thread alive and up to date, very helpful. :toast:
same here...Quote:
Originally Posted by tHe_jOkeR
with open case (no flow in case) : cpu maxed out @ 46°
with cloes case : +50°
cooled by ThermalTake Big Typhoon (soon replaced by Vapochill Micro Air Cooler)
cpu stepping : LDBHE 0601 FPMW
cpu oc : 2,6 Ghz @ 1,4v (drops till 1,37vCore)
that simply sucks:slapass:
my Gigabyte Rocket Cooler 3D Pro cooled nearly same
as the TT but with 45db :D
hmmm thought i get ~38°C with 1,4V at least...
everyone with TT BT post your reults pls:fact:
with TT Big Typhoon :
Idle : 26° ~ 29°
Load : 45° ~ 50°
temps : case open ~ case closed
What vcore are you using??It happens with me and the cpu really dies (1.560vcore)Quote:
Originally Posted by MikalCarbine
holy crap. i just missed out on a 0601SPMW LDBHE :(
they were goin' for $264 on ebay! d'oh
"Originally Posted by MikalCarbine
Well, when I was priming last night my system locked up, upon reboot I got the dreaded 3 LED lights, looks like the CPU is dead, tried an overnight CMOS clear and that didn't seem to help..."
4 LEDS might be CPU dead but not 3. If you get 3 on, it's a RAM issue. The CPU lives if the fourth one goes off.
Stuck at:
4 LEDS = CPU problem
3 LEDS = RAM problem
2 LEDS = Graphics problem
1 LED = BIOS/mobo problem
sounds right to me.Quote:
Originally Posted by stone_cold_Jimi
i have a chip right now that won't run dual channel. it ALWAYS gets stuck at 3 LEDs. I remove 1 ram and the system boots up again.
4 leds were a dead mobo at me :cool:Quote:
Originally Posted by stone_cold_Jimi
Got a new chip :)
LDBFE 0610 UPMW
"N" chip
Anyone seen a week 10 already?
I'm currently still testing the cpu , I will keep you updated about the OC capabilities.
I see drunkencarlos has the same stepping.
Although you got a "T" chip , mine's "N"
T > likes more voltsQuote:
Originally Posted by Jaco
N > likes less volts
thats all :)
yes , I know :-)
But I'm not convinced the N chips are any better, like you seem to think.
I believe T chips scale better with more vcore .
N chips like low vcore , until you reach the sweetspot , then you need a lot more juice to clock any higher.
This is all theory and speculation , of course...
Stone cold Jimi!
Thank you for your efforts for making this list and I am really sorry for your loss.
Perhaps some members want to use a spreadsheet for slicing and dicing according to their needs. For instance, last night I was interested in a 0601 LDBHE TPMW for my mach1 but when I looked into your list thought that perhaps UPMW is better.
Anyways, I prepared a spreadsheet as can be seen in the attachment. Please feel free to change or edit it.
Also, I wish we had something like this thread for 170/175.
PS: I did exclude some results (cannot remember now how many, but perhaps 3 or 4 in total)
Thanks again.
ooztuncer,
Cheers dude, Mate i have a FPMW just for reference.
Nice work. :)
OOOooo yeah got my little 0607UPMW type "N".
I'm currently testing it. So far doing 2.4 easy.
I'm running the ram below. 2gb setup comming next week.
http://img.photobucket.com/albums/v6...T/0607UPMW.jpg
Picked myself up an LDBFE 0610 TPFW -0032 'N' chip....
Anyone got a feeling what it might be capable of?
T and N mean nothing.Quote:
Originally Posted by brechtvm
Id bet it can crack 2.8Ghz, maybe even the more. Keep us informed :DQuote:
Originally Posted by lv_dicedealer
I'm waiting for Jimi's LDBFE he sent me to try out @ -80C temps. I'll let you know what it's capable of after I test it :p:Quote:
Originally Posted by lv_dicedealer
my X2 3800+ LDBFE 0607 SPMW is curenntly at 2.7Ghz 24/7 @ 1.65 100% stable ...high volts, but i dont care :D my watercooling cools her down well. i think i can get 2.8 with a bit of tweaking.
and i thought i had a bad core :pQuote:
Originally Posted by a5h
2.6ghz @ 1.404vCore..
and i wasn't satisfied yet :D
if u have the cooling, just put the vcore up ...it helps :)Quote:
Originally Posted by brechtvm
mine wouldn't oc for :banana::banana::banana::banana:, i crank her up until it oc's how i want it too :D the "T" chips scale well with vcore
bad second core right here, i guessQuote:
Originally Posted by a5h
can't get it higher than 2.6Ghz...
(eventhough not at 1.55vCore :s)
Agree :)Quote:
Originally Posted by afireinside
I thought 1.6v was classed to excessive for a X2 even when running water?.
That's thoroughly excellent of you - you've done the last step that I was too darn lazy to take! Much appreciated and immediately purloined and pasted into a jpg on post #1, in place of the original list (hope that's agreeable).Quote:
Originally Posted by ooztuncer
:toast:
what do i open xls files with
Excel
doh! now i feel extremely lame, btw did anyone else get jipped out of the heatpipe cooler? i got a vanilla a64 one :/Quote:
Originally Posted by rob2687
Yes , X2 3800 comes with the crappy aluminium heatsink.
Only higher models (like X2 4400) have the heatpipe cooler.
my chip is not overclocking great so far . stepping LDBFE 0610 UPMW
(still testing , could be a crappy PSU spioling the fun. )
currently running 262x10 @1.488 (8h dual prime stable)
All my attempts for 2700Mhz failed so far, I always have windows locking up.
System is freezing after a few minutes dual priming, have to reset manually.
It could be because of a crappy PSU : I see 3,3v dropping to 3,26v , 12v -> 11,71v :eek: It's a Tagan 480W (single 12v , 28A) , but could be going bad because of age maybe ?
I'm going to buy a better PSU , like the Seasonic 600W.
tagan 480 should more than power your lot.
I have a Hiper 480W Powering my spec, which is dual 12v rails (15A and 16A) and i can run my cpu up at 2.9ghz with 1.55v, easily.
Check the voltage rails with a DMM and i bet they will be fairly close to their rated specs. It is probably just a bad cpu, or badly cooled (but you say you have water?)
Best to sell and get one of the early 060x ones (0601 being creme de la creme, i think).
Tagan 480 should do the job, but could it be going bad because of age?
This PSU has been running 24/7 for more than 2 years now , could be EOL now , no:p:
so i had a little tinker with my board and cpu a little more, and i am now running at 2.4ghz load temp of 46. After half an hour torture testing with sp2004, no errors as of yet running my pc3200 on a divider of 166 to bring it back up to 200mhz on this overclock. Cpu is at 1.350 volts which i believe is stock volts? although i set it to 1.350 in the bios, asus probe shows 1.38 and fluctuates up and down every now and then :confused: but does not go over 1.4 i think everything is safe and stable and i cant see the need to test the memory as its running at stock speed (200mhz). Although at 2.5ghz my cpu seems to hit a brick wall, it will boot just fine but once it gets to the windows loading screen it will just restart its self i think it may need more volts but im happy at 2.4 right now.
http://img127.imageshack.us/img127/6558/cpuz17da.jpg
http://img151.imageshack.us/img151/1000/cpuz29ot.jpg
http://img56.imageshack.us/img56/402/cpuz39xp.jpg
spec's;
Amd 3800+ 64 X2 LDBHE 0605FPMW Stepping
Asus A8R32-MVP Deluxe
Ati x1900xt 512mb Powercolor
1gb PC3200 Elixir 2x 512mb sticks dual channel running on divider of 166
Freezer 64
Hiper 580w Type-R Psu
Thermaltake Armor
thanks anymore help or suggestions is gladly welcomed :D
Jeez, that was the longest sentence I've ever seen. Please punctuate next time to help us more easily understand what you're trying to say :p:Quote:
Originally Posted by Tom|Nbk
right tidyed that up, now do you have anything to say about my OC?
Well, lets start with your memory.....;)Quote:
Originally Posted by Tom|Nbk
Have any idea what type of chips are one the sticks? Also, they should be able to run better timings -> but positive that if they're rated @ pc3200, they should be able to run at 200mhz @ 1t.
You've got some nice HW there, but that memory seems a bit "out-of-place" when matched with your other components.....
ok dude, well its elixir branded memory i agree its a bit poo and i should look for some more. Although the memory is branded Elixir, cpu-z reports it to beQuote:
Originally Posted by s7e9h3n
Nanya Technology, i have also tinkered around in the bios to try to change it to 1t but i couldnt find an option to run it at 1t anywhere prehaps i need a better look
also torture tested for 1 hr 15 now and still no errors on each core things are looking good im pretty sure this is all stable
http://img226.imageshack.us/img226/303/cpuz47fw.jpg
Jaco my Power supply was doing the same thing... be glad though, mine was dipping down to 11.38v to 11.07v (only 4 months old too). So I took the power supply out and found a new one. Now i found a nice 650Watter and shes holding the voltage steady as I could ever want. Just trying to stuff it back in was rough and sorting through the wires I'll do later.
Anyways with the machine back online I only had sunday night to mess with it. Tested out 2.7 (270x10) with 1.45v (26C/38C) ran prime for about 2 hours, did 3d tests and passed those as well as clearing 32M super pi... so was time to move on. Then I tested 2.8 (280x10) with 1.53v (30C/42C) it primed for an hour then cleared a super pi 32M test. I didn't do a 3d test yet as I wanted to try 2.9... So I pushed forward. Upped it to 2.9 (290x10) with 1.60v (temps were 30-32C/46C... I don't like going over 1.6 on air ...just makes me uncomfortable so didn' go higher in volt) Unfortunately Core 1 refused to run stable and failed attempts of prime and super pi almost immediately. Backed it down to 2.85 still at 1.6V but it still would not run long in prime or super pi. So I backed it down to 2.8 @1.53v again and did a long prime run and after about 2 hours it failed.
Was pretty tired and disappointed after all that so I set up a CPUburn/K7 and let it run for about 2 hours and shut her down to cool off while I went to work. Will see what happens when I get back home tonight.
My LDBFE 0610 UPMW chip is a little disappointing too.
(For what's it's worth :I have a very high batchnr : 1340)
I'm running 2620Mhz @1.488vcore (might get away with a little less vcore) , that's still a 620Mhz overclock. Not that bad actually...
Like everybody here at XS , I was hoping for 3000Mhz @1.5vcore or so...
Bah , better luck next time :)
I'm still hoping my PSU is holding me back, cause i'm having my system lock up completely at 2700Mhz. Normally , there's one core failing first , not this time , windows is just freezing on me after stressing both cores for a few minutes ? Might be locking up because of voltages dipping too low?
i think i may have screwed my watercooling block on my X2 3800 a little to hard, does this matter? cuz it seems my monster watercooling doesnt help me OC at all...
LDBFE 0610 UPMW : 2620Mhz maxed out :stick:
pretty mediocre chip , tried up to 1,50 +10% vcore ... no use :rolleyes:
LDBHE 0601 TPMW
primestable at 2.6GHz with 1.344V (CPU-Z)
What can I expect from this chip?
I use watercooling
2.9+Quote:
Originally Posted by stevke
THXQuote:
Originally Posted by Absolute_0
I hope so :D
Are the X2 3800+ supposed to have a good IMC?
I think about my original UCCC (max out @ 260MHz) running with divider.
Sorry to hear that Jaco, I was really hopeful this would be a good chip too.Quote:
Originally Posted by Jaco
My LDBFE 0610 UPMW (its a pretty high batch number as well 1499) seems like it will max out below 2800... When I run it 2800 at 1.58v it still fails primes in 2 hours... really disappointing. (hoping to at least salvage 2750 or so @ 1.5v or so... I will try again tonight. At least it was better than my old opty 170 which couldn't run 2.6 under 1.55v but still failed prime within 15min...
Thinking I should have got the 0606 EPMW chip... oh well...
yea, pretty good I think. Should be fine for your uccc.
Small update:
After I flashed my ultra to new BT BIOS I could raise 50 mhz
Now I can do 285x10 @ 1.5v (shows 1.45 but I am feeding 1.5)
http://img114.imageshack.us/img114/5...52gigas9ik.jpg
Don't forget I am on air. I hope this week I can build up my water system!
cheers!
nice results monksp. i can clockgen all the way up to 2.9 with 1.450v and play games for about a half hour before i crash. id take it there with volts now, but dont have the cooling yet. next week :slobber:
http://img101.imageshack.us/img101/8...m1mb7ji.th.png
Here is Dual32M :D
Nope, that is not normal.Quote:
Originally Posted by tHe_jOkeR
2850 1.42v I get 43-44c with dual prime smallFFT running. This is with ~22-23c ambient.
You should try to reseat your BT. Make sure you tighten it proper and that its even.
Temp with dual SP2004
http://www.urettferdig.no/forman/ima...X2_2850_SP.JPG
You're absolutely correct there. This is critical. Also, uneven will show as one core failing much earlier than the other.Quote:
Originally Posted by Formann
The weird thing is, the 3800s I've had that ran hot for this reason became outstanding once the problem was fixed. Like they'd "burned-in" with a bad contact. I really believe this helped.
im gonna go stick a matchbook under a corner of my hsQuote:
Originally Posted by stone_cold_Jimi
yepp...
core 1 fails @ dualprime but if i stress only core1
its stable...the temps....i will mount it a bit
tighter.
Attachment 46053
does anybody know what stepping OCuK are4 shipping with the OEM x2 3800s atm?
they're CCBWE 06xx I thinkQuote:
Originally Posted by Micketh
After two or three days of burning in the cpu and tweaking the ram timings (tightened up the timings running 5/6 divider to 2.5-3-2-7-1T), I've finally gotten both cores stable @2800 @1.53v (23C idle and 38C load) :woot:
This 3800x2 (LDBFE 0610 UPMW) has been a rough one to tame, Its didn't do 3000 but I'm happy it will at least do 2800 :toast:
Attachment 46140
0601UPMW LDBHE
2.9 ghz @ 1.5x1.04% prime stable with watercooling
http://www.johnshim.com/forums/xtrem...blecropped.jpg