@starostise, "i think my cpu is awesome regarding temp and voltage". It is, that's fantastic.
@CompGeek, that would be tough. Maybe you could offer to pre-test them.
Printable View
@starostise, "i think my cpu is awesome regarding temp and voltage". It is, that's fantastic.
@CompGeek, that would be tough. Maybe you could offer to pre-test them.
little better :)
cpu @ +17°C
http://membres.lycos.fr/starostise/K...C_cpu-3588.PNG
http://valid.x86-secret.com/show_oc?id=84404
Is this suicide shot or Super PI 1m stabel ?
suicide shot.
hi,
i need some help with san diego 3700 overclocking.
first my config:
- san diego 3700+ on aircooling
- dfi nf 4 ultra d
- 2x512mb twinmos bh-5 old (doing ~265mhz@3,3v and ~272mhz@3,53v)
- msi 6600gt pcie
- lc power 550w powersupply (20-pin)
i have 2 destinations, >3000mhz on cpu and >260mhz@2,0 2 2 x on my rams
so i am trying following settings, they are 4 to 5 h prime and super pi 32m stable:
11x313mhz @1,48-1,5vcore with 166 divider -> 260mhz on rams
so far, everything is ok, but when i startet looping the first 3 tests of mad onion 3dmark 2001 , the system crashes between 1 to 5 minutes.
(i never tried higher versions, perhaps i should ...)
it seems 3d/pcie load crashes my system.
i think, my temp's seems to be okay, 40-42° C load on cpu, 42-44°C load on chip? the volts of my powersupply seems to be okay, too.
i am playing with open case, extra cooling on ram, northbridge, graphic card, and so on to locate the problem, but nothing.
i am playing with different bios versions and spent a lot of time on optimizing all the memorytimings, rising ltd and chip volts .1v but there is no satisfying result.
so i need help and suggestions, especially from people with the same settings or from people with same problems.
by the way, are there pcie settings in the bios , which relieve or stabilize my system?
sorry for my horrible english, i am from germany and i know i have to improve it ;-)
(when i am in the false section, please let me know.)
H.
just started to OC it last nite and this is what I've gotten so far. Will have 3.0 and 30000 by this week end.
http://i20.photobucket.com/albums/b2...h_5845c412.png
http://i20.photobucket.com/albums/b2...th_29476-2.png
http://i20.photobucket.com/albums/b2...h_000_0368.jpg
http://i20.photobucket.com/albums/b2...h_000_0386.jpg
http://i20.photobucket.com/albums/b2...h_000_0374.jpg
http://i20.photobucket.com/albums/b2...h_000_0377.jpg
Nicely done my freind :toast:Quote:
Originally Posted by starostise
Nice one! Any benches? :)
If I buy either an A64 3700+ or an Opteron 146 today, which one will have a better chance to hit 3GHz on air? (under ~1.60V, preferrably under 1.55V)
3700+.
nope.Quote:
Originally Posted by funkflix
mem controler is semi-dead due to a bad insulation, so i do not have dual channel and 1T mode any more :(
3700+. After a couple hours of attempts, I was able to finally run this by changing the drive strength to a combination it liked. http://img449.imageshack.us/img449/8...s5hr6rn.th.jpg
http://img458.imageshack.us/img458/8...s4hr0jq.th.jpg
Now test again with large FFT's and priority @ 10 ;)Quote:
Originally Posted by coop
Heya,
I own a 3700+ 2.2ghz sandy. I have successfully overclocked it to 2.7ghz on stock cooling and heatsink. It passed a 16 hour prime blend test. So i guess its pretty stable :) Just one problem. Under full load such as prime. the temps can go as high as up to 50+*C. Probably because im using stock heatsink. Is there any heatsink and fan you would recommend to get this baby running cool again? Please let me know which heatsink will be good to pick up.
Thanks
Mike
hi
ninja and noiseblocker SX2
keeps my opty at 40ºc 1,52v full load
a bit expensive but a great cooler....
"Now test again with large FFT's and priority @ 10 "
Sheeet my friend, my ram is bulletproof. :slobber: Tried, tested, and proven many times.;)
I am fortunate to have the 2 set I do and to have never sold them.
Ok, but using small fft's stresses your CPU less then using large. Just run the "real" Prime95 and choose maximum heat.Quote:
Originally Posted by coop
A few days ago I've tested my sandy 4000+ the first time with a mach2. The cpu was about -20. But the result was there
http://i49.photobucket.com/albums/f2...cking/M225.jpg
SS was about 3.6GHz
This is my stepping:
ADA4000DAA5BN
KABYE 0538GPMW
1334407150474
screen @ 3604MHz for 4°C
http://membres.lycos.fr/starostise/K...604-dod-4C.PNG
valid: http://valid.x86-secret.com/show_oc?id=87641
it screens @ 3590 for 17°C too so between 4° and 17° it could do better certainly :D
hello guys, ive just recieved my new cpu Athlon 3700+ ccbwe 0549 upmw stepping. been running prime for the last few hours to burn it in. just wondering what sort of overclocks u have got with my stepping
cpu @ +12°C idle
http://membres.lycos.fr/starostise/K...38-dod-12C.PNG
http://valid.x86-secret.com/show_oc?id=90342
coldbug @ +11°C for 330 HTT
time to get my results in here-->
3100MHz suicide
http://img89.imageshack.us/img89/3563/3100mhz9qs.jpg
3008 SuperPI32M stable
http://img164.imageshack.us/img164/9...3008mhz4pq.jpg
Thats all I have here, but thats because my rig is in germany whereas I am in the US.
I think it could go higher, but it was limited by my mobo and cooling, before it was on the eVGA 133-K8-NF-41-AX board (not too bad actually) and a Freezer64 non-pro, but now with the DFI and the SI-120, I am hoping around 3GHz stable! Now if my mem would go it :stick:
CPU : San Diego 3080MHz @ 1.440V
WC : PowerX + Eheim 1250 + Black Ice eXtrem
Stepping : I don't know, buy without IHS ;)
http://mardok.ovh.org/screen/sp2k4/S...308_1.440v.png
3700+ kacae 0605 apgw
i can bench @3g post @3.1 but i can only get 2.9prime stable i had it running max heat for 14 hours till we had a power cut;)
Hello,
Can anyone help me, i have a 4000+ (KABYE 0541GPMW ).
My PC,
Asus A8N32SLI
Gskill HZ PC4000
Enermax Liberty 620W
Help me...
From everything I've read in this thread, it is entirely possible to O/C my A64 4000+ to 3 Ghz? I'm hoping to go 10 x 250 with a 4/5 mem divider. Does that sound reasonable?
possible but it depends of your cpu :)
How so? I honestly haven't overclocked since my P3 1Ghz.
KAB2E 0604 MPMW
http://img.photobucket.com/albums/v5...kRude/laff.jpg
14hours+ prime
spi 1m 29s
idle 38 \ peak prime temp 58 \ peak gaming temp 50
KAB2E 0604 MPMW
http://img.photobucket.com/albums/v5...kRude/laff.jpg
14hours+ prime
spi 1m 29s
idle 38 \ peak prime temp 58 \ peak gaming temp 50
Here is my new CPU....an AMD 3700 KACAE 0602GPMW. I think this stepping is on a par with the legendary 0547GPMW. My highest stable overclock on stock volts (on air) is 3080MHz, and with 1.44V I can reach 3135MHz. The latter is only 1 hour 25 minutes prime stable but I am working on that:
3070MHz at 1.392V:
http://i20.photobucket.com/albums/b2...Hat3070MHz.jpg
3135MHz at 1.44V (check out the great idle temps...NOT):
http://i20.photobucket.com/albums/b2...02Primeat3.jpg
under my single phase:
-19°C idle
0°C load
3205MHz at stock vcore :)
click to enlarge
http://membres.lycos.fr/starostise/K...0_1.36vmin.JPG
cab2e
1,5V<
Air: Thermaltake Big Typhoon
About 35Celsius on idle and around <50Celsius on load
System's in the sig.
Prime likes to run forever on 3050MHz
Haven't tried superpi at all on this processor.
Here's my results for CPU-mark 2.0 and 2.1 :
2.0
2.1
Here's a prime-screenshot with my old 3700+ san diego cab2e-processor:
http://img461.imageshack.us/img461/2219/myoc2ow.jpg
Crappy overclocking chip :(
and here my results with my naked sandy (watercooled):
ADA3700DAA5BN
KACAE 0602GPMW
1400929A60416
Prime @ 3120Mhz 1.504V:
http://bastel-gianni.ripping.org/ove...gpmw2_3120.jpg
SuperPi @ 3160Mhz 1.568V - 26.047s
http://bastel-gianni.ripping.org/ove...rpi_26.047.jpg
CPU-Z @ 3419Mhz 1.664V
http://valid.x86-secret.com/show_oc.php?id=97699
anybody knows what i cant expect from a KAB2E 0604FPFW ? I have it here, but cant test it right now.
edit: well it sucks big time.
hey guys anyone here knows anything about this stepping ?
ada4000daa5bn
kacae0544epaw
is this a good overclocker ?? i just saw one i for about $300 i needed to know if its worth it ?
Those kacae chips seem to be good 'clockers from what I've seen.Quote:
Originally Posted by generalkido28
Talking about all this stepping does anyone know what the VERY last ones were? When they stopped production on the 28th of last month?
KACAE 0607 APMW
2.8GHz on stock volts prime stable
max screen air (+38°C idle)
http://membres.lycos.fr/starostise/K...W/cpu-3180.PNG
max htt air (+38°C idle)
http://membres.lycos.fr/starostise/K...W/cpu-2569.PNG
my cpu with dryice: AMD64 SD3700+ 0602GPMW - 3667.31 MHz@1.84V
:banana:
3rd in the cpu-z 3700+ hall-of-fame...
http://octs.ripping.org/dryicesessio...3700_top10.jpg
the hole story (with pictures)
http://octs.ripping.org/dryicesession1/gt-verified.jpg
http://xs204.xs.to/xs204/06304/3700.JPG.xs.jpg
This cpu is capable of more...I need better cooling (still on hyper6). According to the bios, my idle temp was 46C :lol: . Also, the vcore was a hair over 1.7v, so cpu-z is inaccurate lol.
edit: LOL, I forgot to set the ldt to 3x instead of 4x :slap:
I got this recent stepping 3700. Its an E6 core. (maybe i shuldn't be posting here - almost a san diego:) )
LCBIE 0623FPMW ;)
http://www.z.asghar.dsl.pipex.com/LCBIE.JPG
i havent tested for max yet, need to pop the IHS first. Using XP-90C, load temps are poor 50+. Maybe coz my fan is almost not rotating :D
Just started to test my secondarys 3700+
and so far all I can is "shibby" :woot:
I am at the same temps at stock speeds as I am now at 2.5GHz
http://img207.imageshack.us/img207/6...sdf3234wy4.png
shibby...
http://img226.imageshack.us/img226/9369/3180yi6.jpg
oem 4000+ SD
KAB1E
1.475v i think! on a freezer 64 50c load
my next SanDiego 3700+
http://octs.ripping.org/cpuz3559.JPG
http://valid.x86-secret.com/show_oc.php?id=129861
http://octs.ripping.org/3700_top10_181006.JPG
the superpi result:
http://bastel-gianni.ripping.org/ove...rpi_25.125.jpg
prime:
http://bastel-gianni.ripping.org/ove...7gpmw_3303.jpg
50% OC primestable :banana:
im looking at getting an fx-55 sanddy for $200 any good? i know its not as a good of a deal as a 4000+ do the fx clock higher? im not a noob so i know the fx has an adj multi etc but im going to use the stock hsf ( i know its not the greatest idea but it worked on my s754 3000 i hit 2.5ghz)
my new San Diego 4000+ (0656FPMW I think)
http://img227.imageshack.us/img227/6...04mhz37gr8.jpg
Cooled with a normal watercooling.
Super-PI Stable 3327MHz
The Wold record is my ;)
You have time machine?Quote:
Originally Posted by PlanetDynamic
Just got my new 3700+ sandy 0542FPMW, spi32m stable at 3Ghz, 1.6v and 58c load :| Must pop off IHS, and this chip will fly.
Removed IHS for my new sandy. But OMFG, wtf this IHS have letters (A and H)and AMD logo on it. What does it stand for? Technically same 3700+ E4 sandiegos, but different IHS. Dropped temps by 10c.
I have the following 3700+ on the way:
KAB2E 0551DPAW
Batch number 0617
This is the only result Google has found for it, but at those volts the speed looks good.
AMD 4000+ San Diego, 1,625 Vcore @ Water @ 50 °C
Cant get it Prime Stable at 3.0 Ghz, 2.9 is stable with 1.6v.
More Vcore?
http://valid.x86-secret.com/cache/148096.png
http://valid.x86-secret.com/show_oc?id=148096
1.675 vCore @ 3.12 Ghz AMD 4000+ on water
http://img119.imageshack.us/img119/8141/cpu3120rq7.jpg
okay here is my oc ON AIR @ 1.47 volts
http://valid.x86-secret.com/show_oc.php?id=148477
ADA3700DAA5BN
KAC2E 0547DCPW
Newegg was running a special on 4000+ san diego chips with biostar t-force 6100 boards. My dfi lanparty nf4 died, so i picked a combo up.
Does 3.0ghz on 1.45v under an old xp120 ? cooler. Only primestable for 1 hour though.
Nice clocks you got there. I've got two being delivered today from the Jersey Warehouse. What stepping is that chip?Quote:
Originally Posted by docah
1.675 Volts are not recommended what's the temperature at full load? :rolleyes:Quote:
Originally Posted by Littleluk
The o/c exponent n for your CPU is out of limits here are more info
Cos the photos are not the stable frequencies....
Correct me if I am wrong....
my max. on my 3700+ is 303.5x11=3338Mhz
KACAE 0552FPDW
http://img227.imageshack.us/img227/6...3438sz4.th.jpg
insane volts, because of coldbug :slapass:
with 2nd IHS/Ricky Tweak i got the Temp higher, so i use now 1.79V max.
damn coldbug :slapass:
max. cpu-z so far
3418Mhz @ 1.79V
http://valid.x86-secret.com/show_oc?id=152450
Bought me a 3700+ just for fun and tried to beat my old best 1M result and i got it! :)
http://www.gravedigga.de/gravedigga/...mw/24.282s.jpg
It's just on air.
These new chips are clocking the hell out of the old ones.. I'm going to have to try very hard to get above 3.3g on dice with min.. and thats a cabge 0516 tpaw.
vry nice cpu ! especially that on air ...Quote:
Originally Posted by funkflix
Prime Stable 24h @ Standard Vcore 1,4v @ Standard Boxed Cooler :)
2400 @ 2664
1.4v @ 1.4v
Bus Speed: 200 @ 222
http://img152.imageshack.us/img152/4...reenwc0.th.jpg
funkflix what stepping is that?
coolasus i can do the same boxcooler, at 1.35Vcore :D
i thought only the new Athlon 4000 - E6 Stepping Model - Toledo was able to run at 1.35v?
can the E4 Stepping Model also run at 1.35v with a 10 % Overclocking??
By the way..as i am a noob in this: Can it be dangerous for the health of the CPU to run it at a too LOW voltage?? Or just system crash?
It is a 0630CPMW. :)Quote:
Originally Posted by nano
Some other results:
1st is my 24/7 setting -
http://www.gravedigga.de/gravedigga/..._Luk%c3%bc.jpg
Some prime with colder ambient -
http://666kb.com/i/akk1v0wirccx9gt5p.jpg
Not sure if anyones particularly interested, but this is my 3700+ SanDiego. It's an older 05 stepping, and bought in second hand in August.
CPU: AMD Athlon 64 3700+ E4
Code: ADA3700DAABN
Stepping: KAB2E 0532 XPMW
1M Screenshot of 255*11 1.35V set in BIOS.
http://img295.imageshack.us/img295/7...w00tts1.th.jpg
It's 32M stable at that voltage but needs 1.375V set in BIOS for it to be totally stable. Temperatures aren't too great though. Might invest in a Freezer 64 Pro or better at some point. Been swapping between stock cooler and Akasa Evo 120. Temperatures with the two are about the same.
Mul
Can just result in instability. :)Quote:
Originally Posted by coolasus
Quote:
Originally Posted by funkflix
Thats not normal air temp :stick:
Did i wrote something like that? :stick:
See first prime-screen for normal ambients.
This is my best Super PI time on air cooling.
http://i45.photobucket.com/albums/f9...superpi272.jpg
This is what I run normally and highest temp is 39C.
http://i45.photobucket.com/albums/f90/amwhitey/10.jpg
AMD Athlon 64 4000+ KAB1E 0631GPMW
I dont know if it's an A64 WR on air cooling...
http://valid.x86-secret.com/show_oc?id=159896
http://img261.imageshack.us/img261/305/36053cw.jpg
http://img347.imageshack.us/img347/5010/361471ir.jpg
http://img228.imageshack.us/img228/6156/33139lg.jpg
AMD 3700+ San Diego LCBIE 0626 BPMW its any good for OC?
Its a E4 or E6?
LCBIE its toledo core?
http://www.cpu-world.com/info/AMD/K8...ing_codes.htmlQuote:
Originally Posted by GhostMaster
So Toledo...
Quote:
Originally Posted by cpulloverclock
thanks, toledo looks good for OC next week i will test it with a dfi SLI-D, g.skill HZ PC4000 and a LC Power 550w Green 14cm fan.:D
Expect something around 2900-3050MHz with 1,4-1,6V. ;)
This was my one, with air:
http://666kb.com/i/akbga5ndf4p5lnh1p.jpg
[QUOTE=cpulloverclock]Update on WC :
IMG [QUOTE]
omg , your cpu own... just grudge that..:rolleyes:
Cooling: CPU Thermalright 120 NB Thermalright HR-05
Geil 2GB DDR400 PC3200 Value Ram
http://i44.photobucket.com/albums/f1...sPrime2800.jpg
3D Mark SE
Future Mark 03
Future Mark 06
CPU Cooling: Thermalright 120mm NB Thermalright HR-05
2GB Crucial Ballistix LED
http://i44.photobucket.com/albums/f1...rime2827CR.jpg
3D Mark SE
3D Mark 03
3D Mark 06
CPUZ
CPU Cooling: Zalman 7700-Cu LED NB Evercool
1GB OCZ Gold 2x512
http://i44.photobucket.com/albums/f1...eocz11x254.jpg
3D Mark SE
Future Mark 03
Future Mark 06
Aquamark
Quote:
Originally Posted by yaddam205
maybe ur chip likes volts? 1.648 max
See the sig yo'
Zalman 9500led (modded with MF92)
http://img126.imageshack.us/img126/7...rentbh0.th.jpg
My little Sandy, as reported in my signature...
LINK
Bye:)
Hi, im new on this forums.
Im going to buy an used SD 3700+ and i have some steps to choose
Here is the CPU stepping code ->>>
ADA3700DAA5BN:
KACAE 0551TPAW / CABGE 0517UPAW / KAB2E 0548FPMW / KAB2E 0604FPFW / KAB3E 0548RPDW
I want to know which step is the most overclockable.
I need help, because i must know in 2 days -_-
Thanks for help!!
FX-55 @3113MHz
http://www.voodoo3dfx.com/Sale_Trade...Z_verified.jpg
Oscar
Well...I have a little Sandy too. The IHS is pretty "rubbed" so I don't exactly know the stepping (but I think it might be a CCBWE or a LCBIE, because cpu-id saw it as Toledo, and because it is an E6 revision..and because it goes very good for an E6)
So...
The Rig:
San Diego E6 3700+
AC Freezer 64 Pro
Asus A8N-SLI
2x256 Corsair CMX3200LLPT v1.1 (bh-5)
The Setup
Because of my mobo, I could only provide 1,50v for the CPU and 3,0v for the RAM, so all results are obtained at those values.
All (very cold) air cooling
Temp ambient = +4 degrees Celsius
Location: on the ledge of my window, windows wide open, in the middle of the night :)
The results
1. Max Cpu-Z : 3268Mhz @1,50v - 297x11, ht 3x
http://img291.imageshack.us/img291/8...8mhzzw2.th.jpg
2. Max Spi 1M : 26.250sec @ 3179Mhz - 289x11, ht3x, 239Mhz@2-2-2-5 1T (2-7-12-2-2-5-2-2-1-1)
http://img156.imageshack.us/img156/7...0seckk4.th.jpg
Conclusion: I need more voltage!
I'm also new here, and I'm no guru...but I would say go with the KAB3E or with the KACAE.Quote:
Originally Posted by m_enanos
This was on a fora some time ago:
Quote:
Originally Posted by Namrac
thanks for help man
I will post later, but its 3GHz 250x12 1.55V 4000+
will post specs of the processor later, I have to rip of the HSF
My first post here. :D
I have recently bought a San Diego 3700+ E4 cpu. It is KAB1E stepping :banana:
It does 3GHz prime test vdef, 3.1 GHz prime test @ 1.408V and perhaps even more but i haven't tested yet. I also have a screenshot at 3333 mhz but unfortunatelly it isn't cpu-z verified(you will have to trust me, aldo i can run another session and validate it).
My achievements for now:
- cpu-z max: 3333 mhz @ vcore: 1.536
http://img340.imageshack.us/img340/1...nshozp0.th.jpg
- super pi 1M max: 3267 mhz @ vcore: 1.504 -- score: 25.391 sec
http://img183.imageshack.us/img183/2...2202kc2.th.jpg
- Prime test 3GHz @ vcore: 1.360
http://img469.imageshack.us/img469/1...3ghzsa9.th.jpg
I just bought this cpu and i was impacient to find out how good it is, and my primary target was super pi and cpu-z max so i had no time for prime test. Excepting the prime test screenshot (i had ~ 5C ambient temp) , i used Cooler Master Hyper6+ (fan @ 3300RPM) and zalman SGT1 thermal grease and i had ~ 20C ambiant temperature. ;) I forgot to start smart guardian but my cpu temp was ~ 31C idle .
http://img341.imageshack.us/img341/6530/myrigjq5.th.jpg http://img124.imageshack.us/img124/2...2mhzuw1.th.jpg
What do you think ? :cool:
System:
Asus A8N-SLI
Arctic Cooler 64 pro
AMD 64 4000
Corsair TwinX 4400C25 2x512mb
XFX 6800GSXXX
Tagan480-u22 psu
I’m trying to overclock my CPU to match the FSB speeds my ram is rated at. I bought a matched pair of Corsair TwinX 4400C25 which are rated to run at 550mhz, FSB 275, but the highest satiable FSB my CPU will go to is around 235 with a multi x12, core speed 2.8Ghz.
I know the problem is with my CPU because I dropped the multi down x4 and the Ram went up to 275 no prob on a timing 1:1 2.5-4-4-8 T2, 2.7volts. Passed memtest every time I upped the FSB by 10 from a start of 200
Because my cpu is satiable at 2.8 Ghz , multi x12, I tried dropping the multi to x10 so I could get to my rams max fsb 275, but as soon as I get past an FSB of 240 my cpu becomes unstable will not pass the 30 min test on OCCT.
HT is set to X3
Ram timing 1:1 2.5-4-4-8 T2, 2.7volts
PCI-E set to 33Mhz
CPU volt tried from 1.45 to 1.5
CPU temps have never gone past 41c at max load
I know it sound good getting my CPU overclocked to 2.8Ghz, but I feel it’s not getting the most out and my Ram.
Is there anything I’m not doing, or doing wrong. Do I need a better Motherboard or CPC? I’d really appreciate some help from some of you seasoned overclockers, because as you can tell I’m a bit a novice.
Sry no pics... but odd stepping on 4000+ San Diego
LCB9E/0644 XPMW
Malaysia
4000+ does 3.0ghz @1.4vcore, havent tried higher, yet.
1m time = 28sec
IHS was so concave I've sanded it till all the info is gone, I wrote it on the receipt from 'Egg. :eek:
SD 3500+ 512kb L2
http://valid.x86-secret.com/show_oc?id=185296
Just got my DH-E6 today (4000+)
I'm running 4x512 MB so I have to do 2T and it bumped it down to 333 MHz.
Gave Ram 2.8 volts amd cpu 1.45 vcore And did 255x11 HTT x3 = 2805 MHz
Bumped ram up to 200 MHz (400 MHz DDR) 2-3-3-5 Dual channel (Cpu/14 ratio)
Prime95 stable 20 hours load is 51 C
With an alpine 64 HSF (seems pretty good for it)
super 1M guessting about 30-32seconds
will post pics soon
3100 at default V.
System: Ultra-D rev A02,bios 623-1
coolermaster hyper6+
Mushkin XP3200 TCCD@200:mad:
Catalanu, got stepping info for your chip?
hows my oc on air?
http://valid.x86-secret.com/show_oc?id=189261
more testing
http://valid.x86-secret.com/show_oc?id=189596
and
http://www.shoutupload.com/image-upload/uploads/3r.jpg
http://www.shoutupload.com/image-upl...oads/bench.jpg
http://www.shoutupload.com/image-upl...ads/bench2.jpg
edit
ram dual channel
http://www.shoutupload.com/image-upl...ds/stable2.jpg
last pic w/
2.9 ghz
207 mhz 2-3-3-5 dual
http://www.shoutupload.com/image-upload/uploads/pi.jpg
KAB1EQuote:
Originally Posted by MrRevhead
The cpu is prime stabile.:banana:
KAB1E is one of the best SanDiego steppings (easily achieve 2.9 - 3GHz aircooled) but then it is not easy for 3.1GHz cos limits....:cool:
this oc
http://www.shoutupload.com/image-upload/uploads/cpu.jpg
10 hours orthos stable 49c load
29 sec super pi 1M
http://valid.x86-secret.com/show_oc?id=191919