Congrats from Italy Fugger... great result! :toast:
Printable View
Congrats from Italy Fugger... great result! :toast:
is 1.2V the stock voltage for this cpu or did you 3.8@1.2V under stock cooler for superpi or something else?
could you please tell me if dfi875p-t needs something special to run with sub zero temps?
who?Quote:
Originally Posted by kakaroto
Hi everybody,
First I’d like to say that this is the best forum I’ve ever seen, I believe that XtremeSystems Forums Cover everything… wish you all the best and luck…
Guys I have one question… could anyone tell me how can I get the CPU-z Frequency Checker “Checksum value”? I have CPU-z Vr. 1.24 and 1.25 but I didn’t find this option.
http://www.xtremesystems.org/forums/...chmentid=19513
If there is a link to download it please inform me :)
Thanks a lot for your help…
Buy the way Fugger congratulation; you did an amazing job :)… I want to ask you, have you tried the Nitrogen Liquid?
c u later Guys,,,
phenom - welcome to XS..
Checksum was only given out to some of the mods here at XS in order to prevent fraudulent claims such as "Unknown's".. In the hands of the general public, it's use would become pointless as people would find ways around it..
Awsome! ... Totally awsome! :thumbsup: :toast: :worship: :banana4: :rocker:
Hmmm- Phenom is from the UAE, as is The Unknown, and is looking for the checksum checker. Also just registered. hmmmm :rolleyes: This is all just speculation, and can be diregarded.
Thank "Mag Master 21",Quote:
Originally Posted by Mag Master 21
I agree with all what you said… but I believe that not all the people are the same… any way Man thanks a lot, wish you a lovely day…
Regards,
be sure that i'm not that man called UNKNOWN... and i don't think that UNKNOWN is the only person from UAE...Quote:
Originally Posted by CTKP
mods - ip check please... :rolleyes:
Kind of meaningless, but they are different.Quote:
Originally Posted by moep
I have it too. :DQuote:
Originally Posted by Mag Master 21
Wouldn't be too difficult for him to change IP either :)
:off:Quote:
Originally Posted by KAIN
Looks like we got a little parnoia going on here:D
Welcome to the sickness! phenom
congrats on the overclock...
and i know this is COMPLETELY off topic...
but FUGGER... what system setup do you use on a daily basis?
The first rig in my sig is my daily gamer.
I got it too :) .. but now i can't find it.. :(Quote:
Originally Posted by Skeet
what's it clocked at? or is it running... stock? :eek: :eek: :eek:Quote:
Originally Posted by FUGGER
Why aren't we seeing any benchmarks? Superpi8m please? :confused:
oh, and non-patched please ;)
New bios posted
http://www.dfi.com.tw/Upload/BIOS/LP875PT_DB17.zip
Hopefully all goes well
sweet biscuits gonna try this bios. thanx fugger
Just got this dfi and using my old 2.8 prescott. I am on air. WHich makes it even sweeter. :banana4:
thats an ungodly amount of voltage for a prescott... even if it was on phasechange... i was under the impression that 1.77v was simply way to much for a prescott... :O
nice clocks though, if it's still alive...
Enjoyed reading your current Phase journey FUGGER
*All 18pages *
:cool:
i forgot who i was chatting to about it, but i thought that going over 1.7V on a P4 was like saying i only want to have this chip for a little while...
This chip just seems to love volts, definitely a keeper.
Well, that was the early Northwoods. The newer northies can take it. On a Prescott, however, it is most impressive/insane :D
According to the neat program GORKS OC-Tools, a 2.8E @ 4GHz and 1776mV dissipates just over 200W.. :)
mine is something like 100W!
so that chip has got to be hot!!
Yes.. It's obviously a bug :)
lol, i didnt pick up on that! :(
WRAAAAAAAAAAA!
nice job fugger
At the risk of sounding like an ass...if the thing isn't stable enough to complete any benchmark (which is obviously the case since people have been asking for some results for the past 2 weeks, and have received nothing), who cares if it’s at 6Ghz...In all actuality it doesn’t even have the processing power of a 1gig system (even lower for that matter). Its like a roided out toughman that has 50 inch arms of pure muscle, but yet can't curl 10 pounds (or at least if he tried he starts convulsing, swallows his tongue, and passes out)...seriously whats the big deal.
I mean, I am on my way to 34Ghz, but until I can get it stable enough to bench., I will refrain from gloating and receiving accolades for my achievements.
http://tinypic.com/n7tbp
:wierd: :am:
Someone verify that CPU-Z, we may have a new champ! :D
Don't worry, we give everyone over half a month to produce one stable benchmark result. :cool:
Quote:
Originally Posted by GoonieGooGoo
Welcome to Xtreme, the 6.5 ghz Bansai runs of today are our stable machines of tomorrow, This isn't some place where we try to get a few more months of usefullness out of grandma's Dell :D You've entered XtremeSytems.org where the best of the best come to share knowledge bragging rights, and a common "fun factor" not unlike strapping yourself into race car, or most any other sport. We are all about wringing that last ounce of performance from our machines!
Sweet, but if the thing can't perform at the bootable speed...then what? Booting up windows long enough to take a screen of CPUZ is all that is needed to demonstrate the stable machines of tomorrow? ;) I have dabbled in the OC'ing business (a total novice compared to you guys), and get a huge kick out of it. But the only time I really feel like I achieved something worthy of announcement is when I can produce some bench. results...if a system isn't stable enough to complete at least one (fairly modern or valid) benchmark then all it really represents is a few high numbers in CPU-Z. But as Hallowed said, people are given around half a month to post some bench. scores, so hopefully we will see some really amazing performance from this hulk of a system. But until that, it seems silly to pretend that something amazing was achieved...its all fluff, no substance.Quote:
Originally Posted by Karnivore
Well, the monster clocks in this thread are privy to just a small handfull of people in the world, even if there are never any stable results produced by that CPU its still An Excellent piece of work.
Either you understand it, or you don't, whats practical, or reasonable about a person Jumping into a car and going hundreds of miles an hour to see how fast he can do a 1/4 mile? Can look at many things done, and say sensless, or ridiculous, and you might be right. Eye of the beholder I guess, but no matter, we are still looking at a processor that can most likely slam out some work very close to the 6ghz mark..
To debate the usefullness of any overclock, stable, or not, or a hardware mod thats really not practical, just isn't going to get you anywhere on this forum :D
Well if you are going to compare overclocking to souping up a car, wouldn't the 1/4 mi. be equivalent to the benchmark. A car gets beefed up and gets loads of theoretical horse power in order to prove itself on the track...which is amazing to watch. But no gear head takes pride in claiming his twin-turbo, supercharged, NOS fueled racer has 1500HP but can't make it once around the block let alone attain an 8-9 sec. 1/4 miles. The 1/4 mile is what defines the performance of the machine, not the theoretical horse power.
Anyways, I am not trying to "get anywhere" by disagreeing with how amazing a CPU-Z reading is. I was brought into this thread by reading an article on the Inquirer about 2 weeks ago, and have seen a continuing trend of people basically begging for benchmark results and not seeing anything...so obviously I am not the only odd ball newb in this forum wondering why this macho machine hasn't produced any performance results yet. I am not sitting here saying that OC'ing is stupid...its not at all...I find it very exciting even at the lower air-cooled level...but attaining an awesome OC speed should coincide with actual performance, not just a CPU-Z number.
In short...Fugger please post some bench. scores at 6Ghz so we can bow to your phenomenal skills and truly :toast: to your achievement.
Technically, getting into windows takes longer than that 1/4 mile run.. so in and of itself just getting the screeny is a bench.
Not that we dont understand what you are saying of course, otherwise we wouldnt run stuff like super-pi and 3dmark would we? ;)
I regret to say I agree with Goonie a little bit, I think Tom's FX is a higher achievement at the moment, because he has official benches up. I dont want to take away from you frugger, I trust you will get some real results, especially with that new 3.8, but I think CPU-Z shots are a little overrated. Just looking at the pics of your rig though, and those screens shots, I still bow to you....
When you are after the highest CPU-Z shot you never actually boot the thing up and load windows at that record speed! Clockgen is the tool. The rig needs to hold the record speed only for a second or two. Thats all that's needed for a screenshot.Quote:
Technically, getting into windows takes longer than that 1/4 mile run.. so in and of itself just getting the screeny is a bench.
That also means that there is usually quite a difference between 'max benchable' and 'max clock'. for instance the 3.6 D0 me and The Stilt were playing w/ wouldn't pass 1M SPi higher than 5.4G yet it could produce a CPU-Z shot of 6009MHz (6.1G too but it was lost cos of user error :D).
its more fun the way I mentioned :D
Or you could let it run 8-9 seconds hehe
With my 2.8A I can sun SuperPi8M at 5.575Ghz, but I won't get a screenie at 5.7Ghz. Propapbly the bandwidth on the memory causes the instant shutdown after raising the clockspeed, even though the cpu would be "OK" for a second?Quote:
Originally Posted by macci
You guys had propably something like 333,9Mhz * 2/3 for the memory, so it really wasn't even close to it's limits?
SO HOW DOES IT HAPPEN that THE Unknown gets banned for spitting crap all over the place, and them someone called phenom registers and praises everyone... And by incident they are both from the UAE ???
coincidence? me thinks not
Banning someone on the basis of where they live would be a bad thing. Bannings are a rather rare occurence here, you either have to do something pretty nasty, or completely dis-regard the rules, and do so repeatedly. Neither of which Phenom has done.Quote:
Originally Posted by Voodoo|Minion
Hey man, I don't understand why you still thinking that I’m that man Called UNKNOWN. Tell me is UAE bothering you? or what…. By the way you have to be smart, because if you think I am the UNKNOWN, be sure that I will not be that stupid to put the same country, remember it’s easy to change…Quote:
Originally Posted by Voodoo|Minion
thank you...
"Thanks Karnivore"
Dood, could you be more obvious? You even capitalize UNKNOWN like UNKNOWN did. And asking for the checksum thing? Jesus H.
Quote:
Originally Posted by phenom
and i am not that dude that no body know
any benchs yeat my inglish is not cute
love to see those great scores
Wow lets see some benches :toast:
I Wonder How Hi Can It Go In The Cpu Score In Sandra
Sorry For The Question But Do I Have To Hit Refresh To Se Any New Post
Quote:
Originally Posted by uclajd
How about we stop crapping up this thread now? It really doesn't matter if he is, or isn't, his IP, Email, etc, ARE unique. And unless he does something against the rules its a non-issue.
Replacement 875P-T came in today, Holliday benches incomming.
No, if someone DOES post, you just might see it instantly, but it takes time for someone else to read it then write it down in words. So, its best if you go around different threads and come back to check if anyone's posted once every few minutes.Quote:
Sorry For The Question But Do I Have To Hit Refresh To Se Any New Post
Oh......and.......um......OH YEAH:
:p: :p: :p: Welcome TO XS , Luising !! :p: :p: :p:
Enjoy your stay and we dont mind English that has a few grammatical things here and there. Its what you say and what you contribute that counts. Actually we have members who've posted results, specs and benchmakrs that werent even in English (or anything close to it) and we still get wowed by them.
Perkam
Quote:
Originally Posted by perkam
thanks a lot and hi to everyone
man i just spent the last 2 hours reading through 19 pages of this, and not a single benchmark :(
Year.. When will we see something, FUGGER?
6.3Ghz not enough? :)Quote:
Originally Posted by Mathias-K
6.3Ghz alone already satisfies my curiosity :cool:
Quote:
Originally Posted by Mathias-K
Am i the only one who is able to see that post ? :)Quote:
Originally Posted by FUGGER
but holiday's are too far away :p:Quote:
Originally Posted by Pejsen
Awesome work there:)
As discussed earlier in this thread, many are interested in seeing SuperPIs, 3DMarks and the like. Well, as most other threads bring results, then no, i guess 6.3 isn't..Quote:
Originally Posted by Xassius
Indeed no, but one month to replace a motherboard just sounds a little long to me :) As we do not know how 6.3GHz plus minus somthing would :banana:mpact the ORB, the outcome of this thread is quite interesting, hence the impatience :)Quote:
Originally Posted by Pejsen
This planet has seen two overclocks equal to this, (Macci and Stilt from Finland and Memesama from Japan), both of them over 6Ghz ... and barely SuperPi1M benchable at 5.4Ghz :( :(
I was hoping the new DFI 875-T board would bring us sufficient feed for the hungry prescott and the "new" chipset (i875), but it seems like it really doesn't make it all that much better since we haven't seen any real benches from this one yet. I honestly hope Fugger will show us all and hit it under 4min10s on SuperPi8M and under 22s SuperPi1M!
Please? ;)
I agree, as I'm gonna start going crazy pretty soon if I don't see some results.....the kind we're after anyways. :PQuote:
Originally Posted by Hilppa
Guys.........guys..........Be PATIENT.........Those overclocks are too difficult to work with.........FUGGER will come and show when the "proper" time comes..........At those high frequencies it's too difficult to predict what will happen......Maybe PSU can't handle it or he might want to add another PSU for sharing the voltages e.t.c.........It's NOT easy you know to handle this power and all those "transmissions" from /to CPU and Mobo........Just wait and he'll be back when he will be ready.........FUGGER ALWAYS hits when he is COMPLETELY ready to do so..........Just wait........ ;) :D
I suppose you're right, it's just so hard waiting.......so.......hard.......Quote:
Originally Posted by hipro5
this is why hipro is my roll model B-)
Haha, good call.....Quote:
Originally Posted by Revv23
:D :DQuote:
Originally Posted by Revv23
probably getting his cascade retuned for 7ghz lolQuote:
Originally Posted by Mathias-K
that will be so cool. will it be benchable
7Ghz...pffftt....benchable?
you mean 100% stable ;)
8 :rolleyes:Quote:
Originally Posted by eva2000
How about 24Ghz? hehe
No new results Fugger? :(
I thought holiday benching, meant thanksgiving holiday :confused:
maybe christmas lol?
mans gotta work heh
DFI still hasnt got a bios to support the 570J. I wanted to get benches up for Thanksgiving.
Bad news, hmm, just wanted to order a 3,8E0 with a DFI 875-T, is just the 19 Multi not working, or is the CPU not supported by actual bios?
I have unlocked multiple so I can fire up still, I have not tried with retail cpu to see what happens. With it set on default or 19x multiple the machine will not post.
blegh that stinks.
FUGGER how about ABIT AS8 one?.......
I have one right now infront of me moding it(VERY simple and easy mods)and all I can say is that this mobo is the BEST for LGA775 CPU's and DDR Rams........VERY well filltered for AGP , VCore e.t.c......VTT track(different circuit from the past models - IC7 - ).......I'll put it on tommorow with a P4 3.6GHz CPU and see how it does.........On my opinion this mobo is a winer.......... ;) :)
hipro dont you think the dfi board is better
I haven't seen it that close yet........ :DQuote:
Originally Posted by althes
I can speek only for the ABIT AS8 which is in front of me with the EASIESTS mods ever........FULL of Winbond chips onboard........I'll test it today on air and tommorow with my Prommie(for the time been).......... ;) :)
I gave my AS8 to Reggie, it topped out at 5.9Ghz due to lack of vcore.
:confused:
SO fugger do you think the dfi is better overall.
Yep, I like the DFI 875P-T over the ABit AS8 by far. You need to use 677 selection in bios to get PAT enabled. For very high overclocks you need lower memory ratios
No.......Enabling just Street racer into bios on AS8 , you get the PAT....... ;)Quote:
Originally Posted by FUGGER
VCore can easily moded via a trimmer......up to 2+ VCore...... ;)
The only thing I encoded on AS8 is the VCore thing.......When you pick - let's say - 1.3875 , accualy is 1.31Volts and so on.......At it's max 1.7375VCore accualy is 1.58VCore......I'm working on it....... ;)
Well I have heard the AS8 is a nice board but I really like the dfi board after testing it with the 2.8.
I would like to get the 570J but waiting on dfi to get a bios out before plunking down the cash.
What is the highest you have gotten on the as8 hipro.
Still on air with a 3.6GHz Prescott........FULL Moding it...... :DQuote:
Originally Posted by althes
This CPU can bench with it's default heatsink at 4300MHz.......Not very good but I think it will bench at 5+ GHz on my subzero.......
Hey pics please since myh DFI doesn't go as high fsb than myh Abit.Quote:
Originally Posted by hipro5
:DQuote:
Originally Posted by Mauri Antero
Yes.....I'll upload a guide "ABIT AS8 ALL IN ONE MODIFICATIONS" as my other one for the IC7 one real soon........It will include : VCore dropp - stabilize , VChip(Northbridge) , VAGP , Vfsb , (more)VCore e.t.c...... ;)
hell jeah!Quote:
Originally Posted by hipro5
:banana4:
This will be a great guide...I'm sure...
Quote:
Originally Posted by hipro5
I was so confused and couldn't decide between p5p800 and as8.
I prefer p5p800 and had to mod the vdrop to make it more stable.
and vdimm mod to overcome the max 2.85 vdimm situation, but unfortunately there is no LM358 on it, I had to choose the Vo= Vdimm direct link.
now I am unhappy of 3.3 rail feeding to dimms, I am now converting the mod to OCZ DDR Boosta :)
On the other hand, dfi 875p-t is my next choice, I will try it also in the following months especially for the PAT subject. :stick:
i think FUGGER can hit 6.7 - 7.0Ghz with a good 570J, might take a few chips to get a good 1 tho, that will beat the japs by miles :D
Jumping the gun a little aren't we? :pQuote:
Originally Posted by TheTrebleKing
Once I get a good bios, I hope to hit around 6.66Ghz
Quote:
Originally Posted by FUGGER
would you consider LN2 to push the chip even further? or happy at cascade temps?
btw its nice to talk to a legend :)