没必要啊
A64的温度不高
水冷效果不大，除非电压能加到1.8v以上才过瘾
Printable View
没必要啊
A64的温度不高
水冷效果不大，除非电压能加到1.8v以上才过瘾
huh?Quote:
Originally Posted by joezxk
hey you guys.... i am thinking of buying the OCZ DDR booster, cuz i can't get my mem across 265mhz with this 2.85v.. or do you guys think it's the chipset?
Hmm was running 250*10 for a while but was'nt priming stable..
ive got 2 x 512 ballistix pc4000 ddr and atm running it at 2.70 ( in bios ) at 200 fsb.. but the thing ive noticed is that these ram modules get VERY hot??
anyone else notice this.. dont seem to remember my geil ram being so hot.
Not sure exact temp but i would say 70's-80's was red hot to touch.. maybe this is why i cant prime stable or anything at this speed ? even at 200 there red hot too..
i didn't buy the ocz yet... first want some better cooling for my chipset....
last night did some overclocking in the cold garden :D
with this as result :
http://www.geocities.com/kl00tzakje/2934.JPG
http://www.geocities.com/kl00tzakje/45.55.JPG
klootz whats your ram running at?
in the pifast score i used the 133mhz divider so my ram is doing 201 or 202 mhz, in the max overclock i put the divider on 100 mhz which made my ram do 163 mhzQuote:
Originally Posted by stelleg151
i can't get it higher... so i guess that is because my chipset gets too hot, if anyone has another idea... plz post it ;) i'd love to break 3 ghz :D
Hi
i get a 3200+ 0442 SPMW
what can you tell me about this stepping ?
sorry for asking :-(
Katrin
wow were you get it from? that is the newest week i have seen on this forum so far. what specs are you running?Quote:
Originally Posted by Katrin
Hi,
How about a 3500+ 0437 ?? Any good? I know a guy that is selling one of these, he says it gets 2500mhz@1.45v on air. Should i buy this cpu or should i get a new 3500+ ? The difference is 80€ give or take (about 100$).
Thx! :)
man the number of people that can get 2.8 stable is just unfair! i'm stuck at 2.6 on water still! i got that with my old winchester!! on AIR!! ok so i run less volts now but i cant get even 2.7 and it's making me mad! also i cant get my new 1gb bh-5 over 250fsb! i think it may be the northbridge since i can run that at 2-2-2-11 with less than 3.5V but no more even with 3.9V... vht mod here i come =/
0441..
1.66v 2700mhz.
so far so good.
0437 is rumored to be the worse of the bunch. Had 2 0437s and both kind of s****d at overclocking. Guess he got a very lucky one :D
Hi,
I think i'm gonna give it a try... I'm gonna hook it up on WC, probaby i won't get it any higher than 2.6Ghz stable.
MSI K8N Neo2
Winchester 3000+ (0437)
256 PC4500 Adata Vitesta (samsung TCCD)
Stock cooling
http://www.hot.ee/razor/2640mhz.jpg
yeah i have a brandnew stepping:D 0444XPEW
This is what I've reached with box cooling all around. Gotta get a 7700 cu soon :p:
The CPU can run 2750 without beeing able to run prime, and 2600 prime stable...
@plx:
What's the production week on that 3500+ ?
I really don't know yet... haven't got any cooling paste, so can't take off the cooler... I forgot to write down the stepping before assembling the rig :(
I will post stepping before the end of the week... 7700cu should be up and running then ;)
Btw: why asking ? :)
But I got it from the first sending that reached Denmark in the beginning of november...
I'm just checking production date's on 3500+ to get an idea which are the better ones, yours seems nice.
BTW, that 3500+ 0437 i talked about it's probably messed up, the owner told me that it probably has a bad memory controller... Probably gonna get a 3200+ coz 3500+ are hard to find these days here in Portugal...
Mine is a week 43...
note: a 7700cu does fit an Abit AV8 mobo, right?
Hey everyone, I am done OC'ing until I get my new PSU (ill explain why later)...here is my results:
3200 Winnie @ 1.6v , I don't know how to find week etc help?
320HTTx3LDT --> 8x multiplier (PSU can handle more) :banana:
Patriot XBL ($100 highly recomended for budget OC'ing)--->166 Divider (256 3-4-4-7 @ 2.9v but again varies due to PSU)
and of course MSI K8N Neo2 Trat modded 1.37 BIOS....
2560mhz on air with 50C load temps :) (35 or so idle).
Basically my PSU is getting overloaded (Antec Truepower 350W), and this doesn't allow me to add more fans, it won't increase my vcore or vdimm past 1.6/2.8 usually, and it prevents from decent overclocking on my 6800nu (no 16 pipes :( )
Screenies!
O yes and behold....my piece of :banana::banana::banana::banana: v-rails...just look at that how I am supposed to do ANYTHING with 3.22v on 3, 4.92on 5, and 11.66 on 12v WTF! Im getting an xconnect in about two weeks and then doing a case mod with two high CFM fans (one blowing right at my smartfan, and another as an exhuast, it should lower the temp to about 45 degrees or so I am hoping. I will also try and decrease my vcore and see how stable it is :).
O yes, One more thing,what would be best running 256 with 3-4-4-7 timings and 320HTT with the 166 divider or soemthing else? I just got the whole setup 2 days ago, and day 1 was installing everything :p. Please give suggestions to keep current settings or soemthing else....
from www.mindfactory.de for a week.Quote:
Originally Posted by DevilsRejection
the problem is, that i dont still have a nf4 board. therefore i can not test the cpu... :-(
Katrin
buy an NF3 board;)
Quote:
Originally Posted by FX Freak
ok, but i have an x800xt pci-e @home...
Kati
0.09 3200+0433SPMW
MSI K8N NEO4 Ultra 0443 A3
Apacer Real500 TCCD 256MBx2
XP-90+SanyoH4011
http://home.pchome.com.tw/club/qk4723/qk4722/3200.jpg
http://home.pchome.com.tw/club/qk4723/qk4722/acTCCD.jpg
http://home.pchome.com.tw/club/qk4723/3200/28001.jpg
I had 3 x 3200+ 0441 and best went through superpi8m 2550Mhz 1,65V.... :(Quote:
Originally Posted by viccyran
I got a 3000+ Winchester today. It's a 0444. Here's a screenie with super pi i got in 30 mins of playing.
www.siliconservers.net/34s.jpg
:D
Oh, and btw, it's on stock cooling for now.
what kind of memory have u got?Good timings as well....Quote:
Originally Posted by bofh
It's OCZ PC3200 Plat. Rev.2 TCCD. They can do better, they were relaxed in purpose.
My 3000+ winnie(0441 SPMW I think) will do SPI and pifast at 2650 ( 32 sec SPI).
I just got a new 3500+ NC ( 0438 Spew), and this hunk a junk wont even do 2530 !!
Gee I'm sure glad I bumped up to the higher multi's..... :rolleyes:
very nice results qk, you got a sweet chip, and 30sec 1m is huge for air.
Just got 33s superpi 1m on the 3000+ winnie, and max 2871mhz non benchable. Should get 32s with mem 1:1. :)
What is your memory speed @ 2871? is it 1:1?if it is not 1:1 what is it?Quote:
Originally Posted by bofh
It's not 1:1, i think it was 166 divider, probably around 261. I'll reproduce it in a bit and post the right numbers. I'm trying to use the A64 Tweaker, but it's not working, i set something and it sets back the previous value. And it's showing mixed up values.
Edit: It was 133, mem at 205. Gotta try 150 divider with superpi. :)
Edit2: Mistakenly i was using slot 1&2 for memory, changed it to 3&4 and just got 32s.
http://www.siliconservers.net/32s_1.jpg
i have a week 37 3200+, and i couldn't go higher than 225 mhz 1:1 but i decided to play with the mem divider...
now i'm running 9 x 280 on the cpu and 229 mhz on the ram. did super pi, but i haven't tested anything else. just thought i'd share with any unfortunate week 37 ppl... maybe the memory controller can't handle faster speeds. but u can always use the mem divider to increase the cpu speed only.
I picked up one of the newest winchesters i've seen the other week [0444]. Haven't had much time to test it, but so far i've had it prime stable at 255x10 with only 1.52v to the core.
I can't seem to get much past 250HTT at the moment due to all these I/O problems but i'm gonna see how far it goes as soon as they're sorted.
just got my winnie 3000 and neo2 0411 board
its a week 45 chip but i wont be able to do anything till tomorrow tho when the rest of my kit arrives :(
http://www.vapochill.eclipse.co.uk/hexus/a64.jpg
question, how do you tell what board your neo2 is?
If you mean how do you tell what chipset revision you have, you just pop off the chipset cooler and wipe off the goop. The date codes and revision are on the chip itself. If you are not sure what you are looking at just post a pic and we will let you know.Quote:
Originally Posted by DevilsRejection
how wasy is it to pop off the chipset cooler? any particular tools i need?
squeeze 2 pushpins and off it pops , so easy even a 5yr old could do it :)
Good stepping :toast:Quote:
Originally Posted by da_ging
My new cpu Winnie :D
ADA3200DIK4BI
CBBHD 0447 TPEW
1152427L40054
well i will find out tonight as im about to build it :)Quote:
Originally Posted by boblemagnifique
I wish you loads of luck :)
Just tried today a 3000+ CBBHD 0445 RPMW (same stepping tho'), didn't even want to post at 2.7GHz wit 1.6V.
Now I'm running a CBBFD 0444 TPMW at 2.7GHz 1.6V aircooled prime95 stable. :banana: :banana: :banana4: :banana4:
A big "f#$k you" to epox for their extremely low BIOS voltages :( Will switch maybe to AV8.
Max Screen -> Aircooling Box AMD , 1.6v bios :slobber:Quote:
Originally Posted by boblemagnifique
http://www.membres.lycos.fr/boblemag...ie@2956mhz.PNG
Prime95 stable?
He said "Max. Screen"! U really think that is Primestable?! :rolleyes: ;)
Quick question.
If I use the 1.41b bios, or any, then the vcore is always .5 higher in the bios, than in reallife. Correct?
You mean .1 ?
.1 then, was just checking.
thx
hi there...Quote:
Originally Posted by caligula
i have the same exact stepping, but with only one letter different lol
you have CBBFD 0444 TPMW
i have CBBHD 0444 TPMW
i hope that little letter doesn't change nothing, i like your results a lot! (im waiting for a motherboard to test mine...)
cya
Amazing clocks you got there.Quote:
Originally Posted by boblemagnifique
We want to see it in your Prometeia Mach II@R404 for some 3ghz action. :)
Say cheese, you're on the news :toast:
BTW, please notice that it runs prime stable at 1.5V vcore, as set in BIOS and read by both cpu-z and usdm.
Maybe AMD should reconsider about rebranding 4000+ CPUs as 3000+.
Later edit: CPU-z seems to go nuts at vcore reading when I start the USDM tool. But measured with the voltmeter, vcore is 1.515V.
damn dude..... 2700mhz 1.5v Air cooled ?!
I am glad we have identical Cpus... :D
but now i see a personal problem, im not sure my Mushkin Pc3200 Level2 V2 (tccd) 2x512mb will allow 300htt (about 245mhz frequency) for me to reach 2700mhz :(
can you push it a little higher ?
http://torny.altervista.org/3ghz.JPG
completly unstable... :p:
actually i did a little bit better with iced water(closed 1M@2980) can't show the pic now (that stupid mainboard left me :()
Btw cooling with a 226W Tec :)
cloud: That voltage is sky high for a Weenie.
revo: I think I just ran into some other limitations problem. It's not stable at 2.8GHz even with 1.6V in it, so I assume it's a mobo or memory issue.
these newer weeks seem to be doing very well, even if one cant do 2.7. I wish I had waited to buy my cpu, I have week 35 sitting here waiting for motherboard, because I thought prices might jump again after they dropped to 140.
Just opened the window. If I had this body temperature, I'd be technically dead. Aircooled with CNPS7000.
yep that's pretty right... i selected 1,65... but the voltages on the gigabyte change costantly :(Quote:
Originally Posted by caligula
Merry Christmass to all !!!
I have my Winchester 3200+ at 2500 Mhz - 1.65 Volts ( 10x250 ). My memory is async at 2x208.3 Mhz 2.5-3-3-5 1T - Dual channel 2x512 Samsung DDR400. All of this on Neo2 Platinum.
currently running my week 45 3000 at 2550Mhz @ 1.4v and the memory at 250Mhz @ 2.7 v - @ 8.5 multi* 300htt, i can get it to boot into windows at 2.7Ghz but its not prime or super pi stable but have only tried upto 1.55 volts at that and it does run rather warm at that speed aswell so think i will leave out till i have better cooling
What is a good idle tempature for a 3200 Winnie @ 2400Mhz, 1.45v w/ stock cooler and AS5?
Mine is idle around 40c (or maybe a bit lower) and at load (hl2 and prime95 for ex.) up to 58-59c. Is that normal/low/high?
Thanks in advance.
Regards.
load temps might be a bit high dude, but then it could be the stock cooler runnin at its max. u might consider upgrading your hs and fan.Quote:
Originally Posted by Swing
Got my 3200+ CBBHD 0446SPDW a couple of days ago, and I have just tested it stable in 3Dmark01SE and PI 32M at 2.7GHz with 1.6v.
Its an okay OC, right? I am also using the stock cooler. But its bit of a shame that my board (A8V) only goes to 270htt stable.. Any ideas to get it longer?
hello, then this Cbbhd 0444 tpmw that give what in overclocking?Quote:
Originally Posted by |Oc|REvO_HsArC
Quote:
Originally Posted by S!1v3rB@cK_Dk
thats a great overclock u got there and 1.6v will mean that your chip should last for a long time ;)
Thats what I thought :D Just gotta find out how I can push the board longer. And I also got to get some new memory (2x512), I was thinking of getting some Ballistix, any comments on that?Quote:
Originally Posted by Mana
http://img81.exs.cx/img81/3954/s9393...g02s1lc.th.jpg
Does 302x9 = 2718 100% stable in 3d & prime after taking the IHS off. Taking the IHS off gave 8 degree drop in temps.
I have been able to use (on my board, though) micron memories up to 275MHz 5-3-3-3 (2x256 sticks) with 2.8-3V. Now I'm using them at FSB 300 5:4 (approx 245MHz for my 9x divider) 5-2-2-2.5. Who needs BH5 anyway?Quote:
Originally Posted by S!1v3rB@cK_Dk
One thing for sure: tested today (and stable though) two Corsair 512M sticks with TCCD/BrainPower pcb and they worked upto 285MHz 5-3-3-2.5 ;) There are rumors that some Corsair C2PT revisions have also tccd/bp pcb - cheaper though. My advice: micron (ballistix) support lower timings but in moderate frequencies (230-270MHz), you may want to choose them in async mode, but for sync mode (1:1) use tccd (gskill for example should be ok). The price difference is not too high.
Memory 1:1 DDR500 2.5-3-3-7, 6800GT @stock, details in sig
Could boot at 2800, but crashed. Not Prime stable at 2650. Ended with this. LOVE THE WINCHESTERS!
http://img133.exs.cx/img133/7417/oc4ml.gif
What timnings do you use?
2.5-3-3-5-11-16
yes but i is not to recover my prommyQuote:
Originally Posted by dutchman.pt
Some benchs while always waiting with the box Amd :
http://www.membres.lycos.fr/boblemag...dra2776mhz.PNG
http://www.membres.lycos.fr/boblemag...dra2765mhz.PNG
http://www.membres.lycos.fr/boblemag...superpi29s.PNG
http://www.membres.lycos.fr/boblemag...cpumark340.PNG
Hehehehe some newcastle action lol
http://www.fattass.dsl.pipex.com/stuff/3jig.JPG
Forgot to mention that is under my R507 prom the Gt is good but doesnt take the heat away as well as the 507
i can only reach 2.7ghz stable with this setting. is it the ram that is stopping me? i was thinking about rma the ram and go for the gskill pc4400 hoping to go higher than this. any suggestions from the experts? btw running the ram with ddr booster at 3.15 volts.
System Is:
CPU: AMD Athlon 64 3200+ @ 2700 ( Water Cooled )
Mobo: MSI K8N Neo2 Platinum BIOS 1.51 beta
RAM: 1024 MB OCZ PC3700 EL Gold Rev.3 (2.5-3-3-8-1T) @ 3.15V
Video: ATI 9800 Radeon PRO @ 450/730 (Water Cooled)
HDD1: 36.7 GB WD Raptor, 10000 RPM SATA
HDD2: 300 GB Maxtor DiamondMax 10, 7200 RPM SATA
PSU: Aspire 500W
BIOS Settings:
Memory Menu --> 1:1 Auto, 1T, 2.5, 3, 8, 3
Cell Menu -->
High Performance = Manual
Aggressive Timing = Disabled
NV/ATI Speed Up = Disabled
DRAM Signal Strength = Normal
Spread Spectrum = Disabled
Cool N Quiet = Disabled
HTT = 3x
Multiplier = 10x
FSB = 270
AGP = 66
VCore = 1.6V
VDIMM = 2.85V
AGP Voltage = 1.60V
http://www.xtremesystems.org/forums/...id=21554&stc=1
|Oc|REvO_HsArC i've the same 3200+ can you give me results about your overclock?
My winnie 3200+ doing 2826mhz @ 1.584V (boxed heatsink with 80mm 4500RPM Fan) PiFast stable Link
I hope ASUS makes a bios that can give me 1.65V and when I have my XP-120 I will try to brake the MHZ record on air :rolleyes:
pretty good timings 4 such a good FSB 270+mhz? R u running a ratio?Quote:
Originally Posted by Cyrus The Virus
Crazy Video Card OC as well....
hes using the 3:2 divider which you could clearly see in clockgen in his pic
Just did some playing with my new Neo2 and week 47 3200+ winnie. Can't wait for some new cooling and some decent ram that doesnt max out at 225fsb 3-3-3-8 :(
***Quote:
Originally Posted by Pimp!
It isn't BSQuote:
Originally Posted by Wingless
My stepping:
ADA3200DIK4BI
CBBHD 0447UPCW
1158317L0072
I will make a new screenshot and let it verify:
http://users.pandora.be/CyrusTheViru...1M%2033Sec.JPG
Checked
Looks like my last PM to you didn't help.Quote:
Originally Posted by Wingless
Anymore of this kind of bashing posts will results in a 3 day vacation.
Consider yourself warned.
Check your PM.
Yo iv looked through a few pages and am interested in any week 46 users experience, have a 46 coming 2moro (3200)
dont really have the time to sift through 10 pages of recent posts :)
K8N NEO 2
3200 Winnie
2x512 G. Skill PC4400
01 Link
http://home.insightbb.com/~myglock19/Bench.JPG
Quote:
Originally Posted by glock19owner
your score should be a 30s spi with just a little software-mem tweaking
nice oc!
Your SuperPI 1M is 33 because the memory isn't 1:1. I'm at 2.6Ghz with memory @ 1:1 and I get SuperPI 1M or 32. I dont think he's bs - performance seems about right using those settings. Wish I could get 2.8 Ghz tho :)Quote:
Originally Posted by Cyrus The Virus
I can't overclock cpu when mem is 1:1, my memory sucks in Speeds (except the timings) friday I am going to test some other memory (don't what type it is) And if that doesn't helps I'm buying G.SKill 4400Quote:
Originally Posted by dnottis
thank you...I havent even started tweaking anything really...still finding the sweet spot on the CPU...the G. SKill memory is what really helped...gotta love ram that does 8-4-4-2.5 @300FSB at 1:1 though...and my goal is to hopefully break 29...I know this is a long shot...but I think this setup has a very good chance when I really start tweaking :)Quote:
Originally Posted by esdee
New record for me 3200+ @2951Mhz @1.584V (Screenshot Stable ;) )
Air cooled (box sink + 4500 RPM Fan)
Link Screenshot
That is indeed very impressive.
What speed can you that baby stable?
max stable was 2826 Mhz, the only problem is that I'm missing that Vcore :mad:
Maybe an future bios update will help.
I'd be glad with 2826 Mhz though. :D
No I want more :p: But is it possible with new bios ?Quote:
Originally Posted by Jupiler
Someone thold me that the Winchesters have 0.1V undervolt so If I put de Vcore on 1.65V (ASUS A8N-SLI) then is the real Vcore 1.55V. Is this true (I hope not) ?
Hehe, newer 0441.. spmw I think..
a lot nicer with less voltage :P
http://tsukagi.net/benches/2700.jpg
Finally got my 3000+ into a board. Getting 2.5ghz at 1.65vcore. Sad that its so weak, getting 34second 1m.
Ive gone further with my 3000, 12v rail looks dodgy at 11.85 and reboots when connecting LAN is stopping me from going higher for now