Alright Mr Mbreslin! Congrats! :clap::clap::clap:
OK - bring on the big pcmv score now! :shocked:
Printable View
Alright Mr Mbreslin! Congrats! :clap::clap::clap:
OK - bring on the big pcmv score now! :shocked:
Yeah right, I'm so far down I can hardly see you and mike anymore. Don't drop a penny from up there it will crush my skull. :x
Edit: So I just played bc2 for a couple hours @4.5ghz vcore/vtt 1.4000, everything else was stock. Except for pcmv, bc2 is the most taxing thing I will do with my computer so I think I'm ok for 4.5ghz 24/7. My cpu hates linx and needs 1.4500 to be stable but I'm in the club so no more of that, hopefully there are no dues. :)
Mr mb - yes, welcome! No dues other than the big $$$ in cost you to get here!
But your not done - oh no - not be a long shot - I'm still checking the orb for your new pcmv PR!
Mr Zalbard - in the OP please change my 980x batch from 3003B827 to 3003B287, thanks!
Fixed that yesterday, sorry about that.Quote:
Originally Posted by SteveRo
Very nice, congrats on a nice chip! :)Quote:
Originally Posted by BobyTT
Keep pushing it! :up:
http://img72.imageshack.us/img72/8117/4500linx.th.jpg
Task manager shows 100% load because I had restarted BOINC WCG.
EDIT: forgot batch#: 3003B331
980X@4563.9MHz 1.435V(BIOS1.375V) 6C/12T
【CPU】Intel i7-980X 3003B396
【M/B】eVGA X58 Classified 760
【Mem】PVT36G1600LLK
【SSD】Intel X25-M160G2
water-cooled
CPU： EK-Supreme - Acetal
VRM.IOH.ICH： EK-FB EVGA X58 CLASSIFIED
MagiCool XTREME NOVA 1080 ( 9 X 120mm) Radiator (Fan 12cm500rpm*9)
KOOLANCE PMP-450
I am a Japanese PC creator
http://blue.ap.teacup.com/kazukun/71.html
http://blue.ap.teacup.com/kazukun/74.html
Nice :) What type of cooling?Quote:
Originally Posted by BobyTT
Hey Deadly :) just a simple water cooling.
Hi
I have recently upgraded to 1366 platform from 775.. so still a nubi on OC these .
I hope you can add me to the 4.5 LinX Club.
I have just completed 20 passes at 4.55mhz(HT off) i7 920 (3938B023), 1.528V vCore CPU-Z Load 1.84V PLL, 1.325V VTT, 1.64V DRAM.
Getting close to the limit of my WC system, room temps 80F.
Although I have started to prime 4.59hmz.. I think i am BCLK limited cant go over 219 on this mb. R3E in my sights when they are out..
920 batch 3925A260 HT on
http://gallery.ducatispot.com/image_...16678_full.jpg
http://gallery.ducatispot.com/image_...16678_full.jpg
rob
mw - very nice! - nice low temps - what are you using for cooling?
SteveRo;
Thanks...I took advantage of a cold front that came through and opened the windows so the ambient was about 16-17C. If that had not happened, and I ran the chip at 4.5 with the windows closed at 23C, I would see core temps around 72-74C. Still, I think I can eek another 30-50mhz from this 920.
You can see my build with my signature link, but I've got a MountainMods ascension with cpu/mb/ram cooling by 2 DDC 3.25 in series with res top/acrylic res going to two 3.120 XSPC and one 1.120 XSPC rad; currently not push/pull, but planning. Usually, I can leave the fans at 900-1000rpm and the only
thing I can hear is the GPU.
rob
mw - excellent cooling!
Hey, SteveRo got our 980X 3003B287 twin to 4.531 HT on.............:up:
Low gigglybops though :shrug:
(Booted into 'Diagnostic Mode' and quickened my memory timings :shrug:
http://img402.imageshack.us/img402/883/capture28.th.png
Nice work Mr Newhit!
Really nice low temps also!
Yep, B287 seems to be a good batch.
Many of us are getting low gflops with the 980 - might me a linx problem.
Great job, everyone! :up:
Keep pushing your CPUs! :D
2 weeks ago, a couple of hours Prime95, but forgot to run linx :).
http://img535.imageshack.us/img535/8...a37c614e42.jpg
HA-HA...bottom of the list...can only go up from here.
reminds of the joke: what do you call the guy who graduates last in his class in medical school?......Doctor.
rob
Wow The gamer how you do that Golden batch :P with what mobo was that?
The CPU is crazy but the second core is too bad. I can pass super pi at 5.8GHz with only one core enabled.Quote:
Originally Posted by MrDucky
http://img219.imageshack.us/img219/9...b553d31844.jpg
Can run prime at 5.4GHz with the same core but the second one is dying 200Mhz lower not only at prime cause of the heat but super pi too :(. If the second one can pass super pi 1M at 5500MHz the first one can pass it at 5700-5800 with the same Vcore.
The MB is GB EP45T Extreme, NB is air cooled for both prime and super pi :).
Btw the cooling is SS phase change and the CPU is going above 0 degrees, no cascade or LN2 :).
been trying out a lot of different overclocks, benching the crap out them trying to find the right RAM speeds/ CPU speed combination, this is the lowest RAM speed overclock I have tried, and I forgot to drop the VTT down from where it was needed to run 2200 MHZ stable. also higher RAM speed seems to raise G flops.
Batch 3003B
rig in sig
19C ambient temps
while running Linx
http://i18.photobucket.com/albums/b1...Capture-12.png
after completion
http://i18.photobucket.com/albums/b1...Capture1-1.png
Very nice justin!
When are you going update your pcmv score - long overdue - and with 4x x25m - a real shame!
Thanks.
I had first place for like 2 days. lol I will wait till Intel's next SSD before I attempt it again. :D
When I had 8 Intel SSD's on a LSI 9260, I should have posted up my scores, but they were not enough to take the top.. :p:
Your currently at 13th - with your current setup you don't think you could get at least top ten - maybe top five!
EDIT - I've had first place now 4 times!
The longest I've stayed there is 54 hours!
1 or none. :D:rofl:
If you remember your log in - you should at least go in and give your 13th a title - http://www.futuremark.com/community/...pcmarkvantage/
done :up:
ok,heres my entry into the i7 section.i hope it's ok that i'm only running 4GB.
i dont have a triple channel kit at the moment,but i'm trying to rectify this.
as for cooling,i've got my cpu under water plus AC to keep the loop extra cool:up:
□□MB□□-Gigabyte X58A-UD3R
□□CPU□□-i7-920 #3845B027
□□MEM□□-G.Skill DDR3-2200 cl7
http://valid.canardpc.com/show_oc.php?id=1155708
21x215@4515 w/1.37v w/HT on DDR3-1720 8-8-8-21 1t
LinX 20 runs completed-Vista x64
http://i42.tinypic.com/o044ms.jpg
Prime95 Blend 2hrs running-XP x86
http://i43.tinypic.com/2mzll74.jpg
Prime95 Blend 2hrs stopped-XP x86
http://i39.tinypic.com/awyjux.jpg
Managed another run out of my Gulftown 3003B287, HT on. Gflops a bit low but I cannot think why.
http://img291.imageshack.us/img291/3...pture30.th.png
Much Congrats Mr's Radaja and Newhit - nice runs!
Newhit - I see you're getting aggressive with the temps.
First time I got a i7 prime stabe 8hrs at 4ghz I was at 97C.
I went on to set a pcmv WR with that proc- your fine!
Thanx for your comments SteveRo :up:Quote:
Originally Posted by SteveRo
It's weird really. The temps fluctuate about the late fifties to nudging seventy but when I come back to check that all is well I find 80 to 91 degrees logged on 'Real Temp' but if I watch LinX testing for a while there is only 60 to 70 degrees fluctuations........weird :shrug:Quote:
Originally Posted by SteveRo
SteveRo,thanks
Kitfit1
i975
4840mhz
1.552Vcore bios set with Vdroop enabled =1.487Vcore under load
Batch number is unknown (have never looked :) )
Evga E760
6gb G-Skill Perfect Storm
Asus 5970
Custom built SS cooling.
http://s5.tinypic.com/aeqqvq_th.jpg
Whoa! Nice clock kitfit1. The EVGA board still comes back. :up:Quote:
Originally Posted by kitfit1
KitFit - very nice!Quote:
Originally Posted by kitfit1
What is your evaporator head temp?
Did you build your SS? If not who was your builder?
Yes i did build it myself.Quote:
Originally Posted by SteveRo
I will post a build log in the phase section at some point.
But you can have a look at This thread at Benchtec Uk.
It shows the whole build from start to finish, including load temps at 1.6Vcore running the 975.
I played a little tonight
http://i162.photobucket.com/albums/t...ytt/lynx-1.png
kitfit1,thats an awesome OC.i wish i had a single stage unit or was able to build one like you.
BobyTT,very nice vcore for you 980x's OC.these 980's look like great cpu's.
Good job, guys! It's great to see Gulftowns almost hitting 4800! :D
kitfit1 - your setup and skills are crazy, respect! :up:
TY , i am impressed by Gulftown so far...
Thanks radaja :)Quote:
Originally Posted by radaja
Thanks newhit, i wasn't aware that the EVGA had gone away :DQuote:
Originally Posted by newhit
Thanks zalbard, if you think that clock is crazy, you may not want to see the clock i'm working on at the moment :eek:Quote:
Originally Posted by zalbard
BobbyTT - very nice!
Nice low vcore too!
On the contrary... :p: :DQuote:
Originally Posted by kitfit1
Keep pushing it! :up:
http://img521.imageshack.us/img521/2...inglinx.th.png
#3912B185
4.51GHz i7 920 D0 @ 1.424v
Asus P6X58D @ 215MHz BCLK
6GB Corsair XMS3 1333MHz @ ~1750MHz 8-8-8-20 @ 1.5v
3x Asus Dark Knight 9800GTX+ @ 740/2000/2412 @ stock volts
36GB Raptor
Corsair HX850 PSU
==
Swiftech GTZ Waterblock (Pressure modded, dropped temps by 6c)
1x Thermochill P120.3 w/ 6x Sharkoon Silent Eagle 2000 120mm in push/pull (being upgraded to two of these daisy chained next week)
Swiftech MCP655-B Pump @ ~4400rpm
XSPC Bay Resevoir
Feser One + Deionised water
1x Sharkoon Silent Eagle 2000 120mm on CPU PWM
BobyTT: Can you tell us your batch # please? Also, that's a very nice vcore for 4.7 I'd love to see a bios template for that oc?
http://i162.photobucket.com/albums/t...h_IMG_8448.jpg
For the BIOS template i have to go home and see...
I have a feeling 3003B320 is the new golden batch.Quote:
Originally Posted by BobyTT
I've only seen two of these, one is yours, and the other one passed AM3 at higher frequency than most chips can post at... See the list here.
Hey guys and girls... can I join your club?
batch number is 3912A859
That's a very nice result, congrats and welcome to the club! :up:Quote:
Originally Posted by Enzo78
Enzo78,very nice.great vcore for 4.66Ghz.thats one of the better
39 chips ive seen.thats the kind of vcore you'd expect to see with 38 batches:up:
Always nice to join a cool club ;)
From what I have read on these here forums is that its the strength of the imc in the chip that allows higher bclks? I can boot into windows at 225bclk 1.34qpi/vtt so there maybe abit more in the chip yet.
New submittion @ 1.36v
http://img29.imageshack.us/img29/491...120mb13.th.png
Same CPU as above. :)
I can't believe there is only a single socket 1156 CPU :eek:
Makes me feel so much better about my 4.82ghz quad prime stable (30min++) i7 860 @1.44v; good 24/7 cpu. Only does 4-5 passes of Linx though so unfortunately I won't be joining the club. I was thinking about spending a bunch of time tweaking and getting a #1 spot for the i7s (would be hilarious to see a 1156 cpu as #1), but the recent submission of 4.84 is definitely not something I can surpass. 4.82 would already be at my limit for 20 passes of linx.
I can't believe I got such a good CPU. This chip + more capable hands + LN2 = all CPU 1156 WRs.
Everything is always surpasable, all you need is "the will" and the "means"Quote:
Originally Posted by One_Hertz
So just get to it and do it......................by the way..........i have already got a better clock than that anyway...........so just aim a bit higher :)
I would need a better mounting mechanism for my single stager. I am using socket 775 mounting for 1156! Yes, it is as horrible as you are imagining it. Backplate had to go and a few things had to be made on the fly and the contact still isn't good. Temps as high as 10C when Linxing with -35C evap temp.
I mean to be taking this spot back very shortly again. ;)Quote:
Originally Posted by One_Hertz
The load temps @ 4.8GHz w/ my craptacular single stage were ~ +12C under load. I am sure w/ -100C I should be able to squeeze a bit more juice out of this CPU.
i'm waiting i expect to see 4.9+Quote:
Originally Posted by lowfat
i got my loop up and crunchin wgc @ 4.3+ht 40-50c:yepp:
maybe one day i might join da club
told ya i be back:D
can only run 4gb i have 6gb in but windows won't see 2 after 225blk
cooling mcp320+gtz+jeep heater rad+655+some cold air
batch #3849B018
i'll be back :D when i sort out cooling +ram issues
and go higher;)
I know why your system runs hot! There's the problem right on your desktop! :DQuote:
Originally Posted by zsamz_
Well finally i can join
changed rad and block and can linx at ~1.4vcore at normal ambient temps 22 to 24C, before i had to hit 10C AC to the rad
either way temps are high but system holds it before it was a < 1sec BSOD :)
http://img12.imageshack.us/img12/408...1600linxxs.png
Cheers guys :up:
Sergio
zsamz,wow!! very nice
andressergio,nice.looks like the USB3P is just as good as the UD3P
You only using 3GB of ram? 20min of LinX is not something I would generally consider stable.Quote:
Originally Posted by zsamz_
Thanks radaja yes better and improved but picky with mem as always need volts but its easier on ddr3 i was wondering if the 2x2 Gskill PI 2000 CL6 will work on this board that ram looks awesomeQuote:
Originally Posted by radaja
Cheers :up:
Sergio
thanks manQuote:
Originally Posted by radaja
andressergio lookin good:up:
with the pi max i did on rex was 1940mhz 6-9-8-24 stable over 1940 not even volts help
and i did it with e8600;)not a quad
i put in 6gb windows sees 4 i put in 4 windows sees 2:rofl:Quote:
Originally Posted by lowfat
i'm not goona run linx with 12gb:rofl:
tried primin n was a peice of caked compared to linx:rofl:
hey i'm game stable too:D
i thought the minimum was 2GB installed?so that run should just fine.Quote:
Originally Posted by lowfat
on my i7-920 i only had a 4GB kit on hand and it was ok.i picked the
max memory setting and it was just over 2500 and it was ok.
Quote:
You must have at least 2GB of memory installed in the system.
Screenshot must show a CPU-Z window with 4.5GHz+ frequency.
Screenshot must show a LinX window (max memory settings, click "All" button, or pick the last memory size option from the drop down menu, the "All" option is highly recommended) either running the 20th+* loop with no errors, or with 20+* successful passes.
You actually keep it at those clocks w/ 1.5V+?!?! You got some balls if you do.Quote:
Originally Posted by zsamz_
Ya he definitely qualifies for this thread. I was just saying only 20 minutes of LinX isn't exactly a good test to determine stability.Quote:
Originally Posted by radaja
no big loss if the board goes lolQuote:
Originally Posted by lowfat
i get to buy the rexIII
:yepp: i dont go with just linx i primed also
30 min of l4d2 and 30 min of call of duty4 is real test 4 me
i'm tryin 230blk+ but i need to get water a bit colder i dont make it past 1 min
Are you kidding me? Linx is crazy overkill as it is.Quote:
Originally Posted by lowfat
30 seconds of linx stability = no games will ever crash.
Hell I used to run a CPU that would fail prime after 15 seconds and nothing ever crashed. For people that fold it is a different story of course.
Well I guess it depends on your usage. W/ 9GB installed I do 100 passes. As I've seen it fail @ 50 passes and my machine wasn't stable enough for me.Quote:
Originally Posted by One_Hertz
And zsamz_ it won't be the board that dies, it will be that nice CPU of yours.
well i gettin 12gb of dominator gt so i doubt i gonna be able to run that high with 12gigs we shall seeQuote:
Originally Posted by lowfat
dont worry you can still do 4.8Ghz,i can help you with that problem.just send me 6gigs.problem solved:rofl:
I bet you won't have a problem. I run fine w/ all 6 slots filled. I even did it up to 237blck. When I added the additional 3 sticks I didn't even have to increase any voltages.Quote:
Originally Posted by zsamz_
Very well done, everyone! :up:
The list should be up to date. :yepp:
^ Keep the list alive
I have been on a break from hardware and overclocking for a while, but picked up an i3-530 today to play with. Using the Gigabyte P55A UD6, Corsair H50, 2x1gb HyperX, XP Pro 32bit.
Batch#3943A849
http://img535.imageshack.us/img535/4830/i3530linx.jpg
Uploaded with ImageShack.us
http://img338.imageshack.us/img338/2...esinxi3530.jpg
Uploaded with ImageShack.us
can I play too?
New water cooling, I've not had time to optimize setting yet but Linx stable at 4.5ghz
http://i60.photobucket.com/albums/h2...5ghzstable.png
Got mine stable at 4.5GHz! Freakin' finally..
http://valid.canardpc.com/cache/banner/1189233.png
http://img237.imageshack.us/img237/7388/45151328v.jpg
I'm going to work on the memory next. ;)
SimpleTECH,thats a great cpu you have ther.4515 with 1.32v wow,very nice
Thanks radaja.
I've been having an issue with this CPU in the past, couldn't get it above 4.2GHz. For some reason today, I felt like seeing if I could do any better. Keyed in some numbers into the BIOS, tested for stability, and was able to finally get somewhere. :rocker:
Great OC Major. You have very nice temps, may I ask what kind of water cooling are you using? :)Quote:
Originally Posted by Major
Woow! Sweet! :yepp:Quote:
Originally Posted by SimpleTECH
I'll update my signature today, here is a thread in the watercooling section aobut the setupQuote:
Originally Posted by Gorki
http://www.xtremesystems.org/forums/...d.php?t=251857
That's very nice for such an inexpensive chip! Great vCore, too! :up:Quote:
Originally Posted by OC Nub
Did XP 32 bit make much of a difference, what do you think?
Hell, yes! :DQuote:
Originally Posted by Major
Welcome! :cool:
Congrats! I'm sure you can get it higher than that judging by your vCore! :DQuote:
Originally Posted by SimpleTECH
Quoted because it looks sexy! :DQuote:
Originally Posted by NCspecV81
I'll bite at your submission, though. Just 2.5GB of RAM used by LinX when you have 6GB installed? Are you using a 32bit OS?
Quote:
Originally Posted by NCspecV81
got any more pics of the bench I will have one here Thursday.
Quote:
Originally Posted by zalbard
No I saw someone's screenshot that used it so I thought that's what we was using for this thread. I can always pull a stick and rerun it lol. I actually use my pc so just sitting to watch LinX run for hours on end just isn't something I plan or want to do.
Thanks.Quote:
Originally Posted by zalbard
I havent tried this chip in W7 yet, just got it yesterday. I'm sure with 4gb of ram and a 64bit OS it will take a little more juice but I am pleased with it.
You can easily use 3300-3500MB for LinX even if you have only 4GB installed as long as you're using a 64 bit OS.Quote:
Originally Posted by NCspecV81
Hi everybody! This is my software development computer.
CPU: i7-980X Batch: 3003B288
Mobo: Asus P6X58D Premium
Ambient: 27c
Feedback on my settings?
RealTempGT was open longer on this run to show max temps
http://img16.imageshack.us/img16/580...ssedcroppe.jpg
Higher Gflops
http://img6.imageshack.us/img6/4723/...ssedcroppe.jpg
@00011011: Maybe a screenshot of all your voltages, (assuming asus has some app that will show this) if not you could simply tell me them?
Also that's quite a computer for no gaming. What sort of work/hobby do you do with it? (if you don't mind)
Another run with the i3-530 today. P55A UD6, Corsair H50, 2x1gb HyperX, XP Pro 32bit
http://img139.imageshack.us/img139/5...inx4620mhz.png
Uploaded with ImageShack.us
[QUOTE=OC Nub;4395071]Another run with the i3-530 today. P55A UD6, Corsair H50, 2x1gb HyperX, XP Pro 32bit
http://img139.imageshack.us/img139/5...inx4620mhz.png
Great run Tom :up: Congrats
Thank you Sergio.
That's actually a minor increase of vCore to gain 100MHz. Waiting for 4.7! :eek: :up:Quote:
Originally Posted by OC Nub
q9650@4500MHz(9x500) 1.45V LinX Stable
http://img99.imageshack.us/img99/557...xstable.th.jpg
Q9650@4.5GHz (9x500) 1.45V watercooled by EK Supreme HF PA120.3 DDC3.25 XSPC Res Top 6xPanaflo FBA12G12H|ASUS P5E X38 @ Rampage|2x2GB OCZ Blade 1200@1200MHz PL7|Sapphire HD4870X2 832/1000 watercooled by DD|CM RP M1000
Cool! Finally got my watercooling system in check....Swiftech Apogee XT Ultra Extreme is awesome!:D
http://i572.photobucket.com/albums/s...m/Finished.jpg
Intel I7 980X Batch 3003B475
I just noticed this when someone pm'd me in the forum and asked me about my QPI voltage. When I had my 920 c0 then 920 D0 my QPI was 1.50v(on Air), but since I watercooled my system and the QPI/RAM controller on the R2E it dropped down to 1.20v(Lowest on this board)! Thats 12Gig at 1866 at cas 8. Although I've never had a problem running 12 Gig stable with this board(Been running it over a year now), Its an oversight that I never noticed till now. Enzotech's QPI/Dram Waterblock makes a big difference. Hope this helps someone. fyi.:eek:
http://i572.photobucket.com/albums/s...ePicSmall1.jpg
http://i572.photobucket.com/albums/s...ilBabecase.jpg
I will work on that this weekend.Quote:
Originally Posted by zalbard
I picked up another 920 a while back for 179.00 at MicroCenter. Finally got around to installing it. I think I can get vcore below 1.4v with a little tweaking.
Batch#3937B785 X58A-UD7, 3x2gb DominatorGT, water cooling.
http://img175.imageshack.us/img175/1...045ghzlinx.png
Uploaded with ImageShack.us
I'm not quite there yet, (Max memory stable that is) but getting closer. Since I don't have much of a clue yet with overclocking this high, I just plugged in a bunch of numbers and went for it. I'm going to try again tomorrow.
http://i39.photobucket.com/albums/e1...0a_cropped.jpg