DFI Infinity 965-S Tests (535 FSB 1:1)

Printable View

Show 100 post(s) from this thread on one page

09-15-2007, 10:23 PM
nzbleach

My 24/7 OC

DFI 965 Dark Vanilla
2 x 1GB Crucial Anniversary
E6750

http://i14.photobucket.com/albums/a3.../dfidarkoc.jpg
09-16-2007, 12:05 AM
Nazu

E6600@3,7GHz, DFI P965-S Infinity and 2x G-Skill F2-6400PHU1-1GBHZ. Rest of the parts in sig.

http://koti.mbnet.fi/nazu/Kone/orthos14h.jpg
09-16-2007, 01:43 AM
yotomeczek

Some magic with 4:5 div (magic+clockgen+MemSet)
http://i189.photobucket.com/albums/z...omeczek/45.jpg
09-16-2007, 01:56 AM
ziddey

I'm not sure but I had the same issue. I held the same cpu for 3 motherboards and had the same results on all of them. Basically, I was trying for 8x450=3600 on an e6400, and it'd sometimes be able to prime for 24+ hours. But it'd crash sometime later. Sometimes it'd be before 24 hours. Everything was pointing to overstressed power delivery to the cpu, but 3 motherboards ruled that out, and I've tried several power supplies. I later got a different cpu that can do 8x450=3600 on all 3 motherboards. Same amount of voltage.

Try narrowing down the problem. What if you keep everything including voltages the same and just drop the multiplier down to 6x or 7x or something low?
09-16-2007, 07:00 AM
ridikolous

Quote:

Originally Posted by fireice2

im using 333FSB for my 24/7 settings.

CPU +137.5mv (CPU 333x10)
Vdimm 2.2v (2:3 DDR2-1000 @ 4-4-4-10)
NB 1.25v
SB 1.5v
SB05 1.05v

even until 400FSB NB1.25v is stable for me.

Im not quite sure with a Q6600 though. :P hehehehe

i got to prime for 12 hrs again... my just adding .25mv of vcore

what kind of timing are you using to achieve 4 4 4 10, my comp would boot at ddr2 1000 at those timing
09-16-2007, 08:14 AM
HousERaT

Quote:

Originally Posted by yotomeczek

Some magic with 4:5 div (magic+clockgen+MemSet)
http://i189.photobucket.com/albums/z...omeczek/45.jpg

I'm messing around with mine right now on the 4:5 div. Booty up from bios and not doing anything special expect the crazy amount of voltage on the NB (1.8v).
09-20-2007, 10:23 PM
DoObs

Hey guys, a big thanks to Trax, he has lent me his E6700 to play around with got some great scores and pics to show, and one real scary one

http://www.youtube.com/watch?v=_cQB3Chzse4

http://i161.photobucket.com/albums/t...ture001-10.jpg

http://i161.photobucket.com/albums/t...cture004-5.jpg

Ok here is an updated score to my name. 3Dmark 2001

http://i161.photobucket.com/albums/t...ark0164K-1.jpg

Sis Soft Sandra memory bandwidth test

http://i161.photobucket.com/albums/t...Sandra2008.jpg

SuperPI 1M -------- 12.485s

http://i161.photobucket.com/albums/t...rPi12.4854.jpg

Oh then my little scary moment if i was to bench for another 30mins or so less, this would have gone onto my board...

http://i161.photobucket.com/albums/t...cture007-2.jpg

Coolbeans been a good run, im very happy with my scores
09-21-2007, 04:08 AM
Counter CS

Why you use 2.31v for 5-5-5-15 2T only 456Mhz ?
10-01-2007, 11:35 AM
keenan

I realy think there must be different revisions of this board. Mine does wonders with a E2160 (100% Overclock) but with my Q6600 GO I cant even boot into windows above 333FSB. I have seen many Q6600's hit 3,6 Ghz + on this board, but I have tried everything, no luck
10-01-2007, 11:38 AM
ziddey

have you tried a different q6600 g0 / that cpu in a different board?

Personally, my dfi isn't all too great either. But I tried my new e6750 g0 in a abit ip35e and it also hit similar fsb wall issues.
10-01-2007, 12:06 PM
keenan

With this board, my chip can post at 4Ghz + but it wont boot into windows, it just reboots at the vista loading screen at anything above 3Ghz, nothing helps, not Voltage increase...nothing

Getting a Gigabyte P35-DS3P in the morning, will see how it goes with that, hoping for something good
10-01-2007, 02:27 PM
keenan

Can someone help me with this, every time I run Orthos for stress testing, my onboard usb devices goes crazy, external hard drive goes on and off as if someone is switching it on and of, tried a flashdrive, Ipod...all the same.

What can cause this...?

ALso, what prog. do you guys use to measure voltages..?
10-01-2007, 07:19 PM
ridikolous

im in the same boat... i cant clock pass 330 fsb.. with everything i tried still no go.. try a different mobo.. like a p35 chipset to see how it goes.. i also want to know if you have success with that gigabyte board.. if yours do good i might pick up a abit p35 pro.
10-01-2007, 11:22 PM
keenan

New motherboard is comming in a couple of hours, will let you know haw I get on, lets keep our fingers crossed
10-02-2007, 12:08 AM
The Nemesis

@keenan
My G0 did not do as well with this board as my b3. My b3 was 3.3ghz 12hrs prime stable @1.36v on air and 3.5ghz @1.53v on water and 3.7Ghz 3Dmark06 Stable. I sometimes think it doesn't like the G0 stepping. I'm using the 424 bios, what r u using?
10-02-2007, 12:22 AM
keenan

Quote:

Originally Posted by The Nemesis

@keenan
I'm using the 424 bios, what r u using?

I have tried them all mate, tried 2 different GO's.

With my current setup, this board starts @ 450 x 9. So it posts at anything up to 4.2Ghz, but anything over 333Fsb wont boot into windows

I have tried everything, lowered my multy to 7x to try more FSB, not a chance

After getting this new Gigabyte P35-DS3P I might invest in some nice branded Ram. Crucial Ballistix 6400 C4 maybe
10-02-2007, 03:50 AM
Enoc

Quote:

Originally Posted by HousERaT

I'm messing around with mine right now on the 4:5 div. Booty up from bios and not doing anything special expect the crazy amount of voltage on the NB (1.8v).

i just need 1.5 :) , i'm on 3-26 bios...
10-02-2007, 03:58 AM
Praz

4:5 is not the divider to use with this board. NB voltage will most likely be maxed out before 450 FSB is reached.

Quadcore clocking requires patience and perseverance. And then it's all in balancing the settings to work at that particular FSB.

Have a look staring at post #22.

http://csd.dficlub.org/forum/showthr...1391#post31391
10-02-2007, 04:56 AM
keenan

Quote:

Originally Posted by Praz

4:5 is not the divider to use with this board. NB voltage will most likely be maxed out before 450 FSB is reached.

Quadcore clocking requires patience and perseverance. And then it's all in balancing the settings to work at that particular FSB.

Have a look staring at post #22.

http://csd.dficlub.org/forum/showthr...1391#post31391

Still no luck mate, sappose its just luck of the draw with these boards.
10-02-2007, 05:34 AM
Praz

I'm not saying use those settings. It was meant as an example how each setting needs to be explored in depth and one at a time. The board I did that on really sucks for quadcore usage. Still was able to end up with a good 24/7 configuration with low voltages. Took a couple of days to finally reach that. Most all the voltages are interdependent on each other.
10-02-2007, 06:10 AM
keenan

Yes, I know, just thought I'd give em a try. Just got my Gigabyte P35-DS3P. Gonna see if things look any better for the Q6600
10-02-2007, 06:29 AM
fireice2

Quote:

Originally Posted by ridikolous

i got to prime for 12 hrs again... my just adding .25mv of vcore

what kind of timing are you using to achieve 4 4 4 10, my comp would boot at ddr2 1000 at those timing

mode 2
mode 1
fast
fast
4
auto
auto

4-4-4-10
4-22-3-10-9-3-8-6-6-5-4-4

2.2v (2:3 333FSB)

My E6700 s :banana: cks... need lots of V at 3.34ghz. :down:
10-02-2007, 04:36 PM
ridikolous

Quote:

Originally Posted by keenan

Yes, I know, just thought I'd give em a try. Just got my Gigabyte P35-DS3P. Gonna see if things look any better for the Q6600

any luck yet? keep us posted
10-03-2007, 01:54 AM
keenan

Ok, I'm gonna post the Gigabyte P35-DS3P's results in this thread if its ok...?

First off all. At stock settings, this board is alot more responsive and the whole feeling of it is just more....well. It just feels as if its a beast, made to perform.

Here are stock temps on idle:

http://i164.photobucket.com/albums/u...ckidleDS3P.jpg

Stock temps load:

http://i164.photobucket.com/albums/u...ckLoadDS3P.jpg
10-03-2007, 01:55 AM
ziddey

nice. i take it fsb scaled better on that than dfi?
10-03-2007, 02:16 AM
keenan

Quote:

Originally Posted by ziddey

nice. i take it fsb scaled better on that than dfi?

I dont understand...?
10-03-2007, 02:19 AM
keenan

333 x 9 @ stock Volts

Idle

http://i164.photobucket.com/albums/u...ar/3.0idle.jpg

Load

http://i164.photobucket.com/albums/u...ar/3.0load.jpg
10-03-2007, 02:31 AM
keenan

Some more....

355 x 9 still on stock Vcore

Idle

http://i164.photobucket.com/albums/u...ar/3.2idle.jpg

Load

http://i164.photobucket.com/albums/u...ar/3.2load.jpg
10-03-2007, 02:54 AM
keenan

Finally at 3.4Ghz

378 x 9 Vcore raised to 1.425V in bios, 1.392V in windows 1.376V load

http://i164.photobucket.com/albums/u...ar/3.4load.jpg
10-03-2007, 03:21 AM
Praz

LOL. Prime needs to run not just start.
10-03-2007, 04:45 AM
keenan

I know that....

I will first get my clock and then adjust voltages for stability
10-03-2007, 07:59 AM
Spawne32

Hey guys, i just got my DFI P965 Dark for my brothers new computer, however there are only 3 ram multi's available, putting a hamper on the overclocking as i only have OCZ platinum to work with atm. Highest OC i can get is 2.4ghz, i updated the bios to the latest version however it doesnt give me any extra multi's.
10-03-2007, 09:32 AM
The Nemesis

Amazing how user's will purchase another board to acheive better overclocking results without fully exploring the capabilities of their current board. Keenan's results are nice though unproven as far as stability goes, but I think it would have been at least possible to achieve Praz's results had more time been spent trying to acheive them.

Spawne32

I don't think this board has ever had dividers to reduce fsb. Only 533 = 1:1, 667 = 4:5 & 800 = 2:3.
10-03-2007, 10:46 AM
Dark79

I put a G0 quad (L728A) in my P965-S and can get it up to 9x390 (7 hours prime stable) but had to ramp up voltages all around.

Vcore: 1.472 idle / 1.440 load
VTT: 1.425
NB: 1.40

I've never been able to hit 400 FSB or over at any divider at any voltage without Windows rebooting as soon as I start Prime. Also, with the quad in, I have cold boot issues where it takes up to 4 or 5 restarts before the board will successfully post. Tried this with 2 different P965-S boards with the same results.
10-03-2007, 11:42 AM
keenan

[QUOTE=The Nemesis;2467931]I think it would have been at least possible to achieve Praz's results had more time been spent trying to acheive them.
QUOTE]

Believe me alot of time was spend...around 4 weeks to be exact
10-03-2007, 12:18 PM
Spawne32

Quote:

Originally Posted by The Nemesis

Amazing how user's will purchase another board to acheive better overclocking results without fully exploring the capabilities of their current board. Keenan's results are nice though unproven as far as stability goes, but I think it would have been at least possible to achieve Praz's results had more time been spent trying to acheive them.

Spawne32

I don't think this board has ever had dividers to reduce fsb. Only 533 = 1:1, 667 = 4:5 & 800 = 2:3.

no no, i bought it for my brothers new comp lol i just wanted a good board for him, ill just have to get some good ram in there. I know my Biostar P35 board started with only 3 options for dividers however they added more with the next bios update.
10-03-2007, 12:28 PM
ridikolous

keenan nice results juss need to see prime go on a lil longer than startup... im looking into another board... i havent gave up on this board yet either... it is nice to have another board laying around to see if your cpu works better in it. ive spent about 5 weeks on this board to end up at 330fsb..
10-03-2007, 12:59 PM
Praz

Is this board more difficult then it should be with quadcores?. Probably. The only way most will see good results is with a systematic approach. The settings and voltages I ended with are good only for that FSB. If I leave everything as is and drop down 20 or so FSB the system is no longer stable.

GTL+ Driving Strength is a good example. At 320 I had to set it to Mode 1. Around 370 it needs to go to Mode 2. For each bump in FSB that brings instability each setting/voltage needs to be tried one at a time.
10-03-2007, 01:36 PM
keenan

I do want to add that with my E2160 I easily got speeds of 3.6Ghz with 1.6V. Some of these boards just dont clock as good as others.
10-03-2007, 03:22 PM
GripS

My results with this board and a Q6600 'G0'

First the settings:

Code:

NB Strap Select: 266 Exit Setup Shutdown: Mode2 CPU Clock Ratio: 8X CPU Clock: 425 Boot Up Clock: 400 DRAM Speed: 533 PCI Clock: 100 Auto Detect PCI Clk: Enable Spread Spectrum: Disable CPU Feature Thermal Management Control: Disable Limit CPUID MaxVal: Disable PPM Function: Disable C1E Function: Disable Execute Disable Bit: Enable Virtualization Technology: Disable Frequency unlimit: Disable Voltage Setting CPU Voltage Setting: +.150mv DRAM Voltage Setting: 2.1V VTT Voltage Setting: 1.20V NB 1.25V Setting: 1.35V SB 1.5V Setting: 1.5V SB 1.05 Voltage Setting: 1.05V DRAM Timing DDR Configuration Mode: Auto GTL+ Driving Strength: Auto Enhance Data Transmitting: Fast Enhance Addressing: Fast DQ Calibration: Auto Channel 1 CLK fine delay: Auto Channel 2 CLK fine delay: Auto CAS Latency Time (tCL): 4 DRAM RAS# to CAS# Delay (tRCD): 4 DRAM RAS# Precharge (tRP): 4 Precharge dealy (tRAS): 10 All precharge to Act: 3 REF to ACT Delay (tRFC): 22 MCH ODT Latency: Auto Write to PRE Delay (tWR): 10 Rank Write to Read (tWTR): 10 ACT to ACT Delay (tRRD): 2 Read to Write delay (tRDWR): 8 Ranks Write to Write (tWRWR): 5 Ranks Read to Read (tRDRD): 5 Ranks Write to Read (tWRRD): 5 Read CAS# Precharge (tRTP): 4 All PRE to Refresh: 4

The screens:

http://img2.freeimagehosting.net/upl...5e944b8642.jpg

http://img2.freeimagehosting.net/upl...98d675e6e6.jpg
10-04-2007, 06:27 AM
Dark79

Here's a screen of my Q6600 at 3.5 after 6 hours of Prime. This is the best I can do so far.

http://i14.photobucket.com/albums/a3...965S-Q6600.jpg
10-04-2007, 08:30 AM
GripS

Hey Dark79 VERY NICE. @ 4:5 even.... that is truly amazing for this board. Can you post your bios settings?

Also are you using air?

What is the voltage reading from smartguardian when running prime? Approx .03 vdroop?
10-04-2007, 08:38 AM
yotomeczek

Quote:

Originally Posted by GripS

Hey Dark79 VERY NICE. @ 4:5 even.... that is truly amazing for this board. Can you post your bios settings?

well ... mine 4:5 wasn't eaven comment

Quote:

Originally Posted by yotomeczek

Some magic with 4:5 div (magic+clockgen+MemSet)
http://i189.photobucket.com/albums/z...omeczek/45.jpg
10-04-2007, 08:43 AM
keenan

ok guys, sorry I took so long, spend all day lapping the cpu and geminII

Started at the very bottom and working my way up...

Only running 10 minutes prime95 for now, just to check stability...

After lapping stock idle temps dropped by 3'C and load dropped by 9'C

Here are some results:

2.4Ghz

266 x 9 @1.185V, max load 36'C

http://i164.photobucket.com/albums/u...rimestable.jpg

3.0Ghz

333 x 9 @1.225V, Max load 38'C

http://i164.photobucket.com/albums/u...rimestable.jpg

3.2Ghz

356 x 9 @ 1.3V Max load 44'C

http://i164.photobucket.com/albums/u...rimestable.jpg

3.3Ghz

367 x 9 @1.375V, max load 48'C

http://i164.photobucket.com/albums/u...rimestable.jpg
10-04-2007, 09:33 AM
keenan

Still going good...

3.4Ghz

378 x 9 @ 1.4V, max load 52'C

http://i164.photobucket.com/albums/u...rimestable.jpg
10-04-2007, 09:44 AM
GripS

Quote:

Originally Posted by yotomeczek

well ... mine 4:5 wasn't eaven comment

That's very nice as well. However we are working with quads.;)
10-04-2007, 02:29 PM
Dark79

Here are my settings:

Code:

NB Strap Select: 266 Exit Setup Shutdown: Mode2 CPU Clock Ratio: 9X CPU Clock: 389 Boot Up Clock: 100 DRAM Speed: 667 PCI Clock: 100 Auto Detect PCI Clk: Enable Spread Spectrum: Disable CPU Feature Thermal Management Control: Disable Limit CPUID MaxVal: Disable PPM Function: Disable C1E Function: Disable Execute Disable Bit: Enable Virtualization Technology: Disable Frequency unlimit: Disable Voltage Setting CPU Voltage Setting: +225.0mv DRAM Voltage Setting: 2.075V VTT Voltage Setting: 1.425V NB 1.25V Setting: 1.40V SB 1.5V Setting: 1.50V SB 1.05 Voltage Setting: 1.05V DRAM Timing DDR Configuration Mode: Mode3 GTL+ Driving Strength: Mode2 Enhance Data Transmitting: Fast Enhance Addressing: Auto DQ Calibration: 6 Channel 1 CLK fine delay: Auto Channel 2 CLK fine delay: Auto CAS Latency Time (tCL): 5 DRAM RAS# to CAS# Delay (tRCD): 5 DRAM RAS# Precharge (tRP): 5 Precharge dealy (tRAS): 12 All precharge to Act: 3 REF to ACT Delay (tRFC): 30 MCH ODT Latency: Auto Write to PRE Delay (tWR): 10 Rank Write to Read (tWTR): 11 ACT to ACT Delay (tRRD): 3 Read to Write delay (tRDWR): 8 Ranks Write to Write (tWRWR): 5 Ranks Read to Read (tRDRD): 5 Ranks Write to Read (tWRRD): 5 Read CAS# Precharge (tRTP): 4 All PRE to Refresh: 4

Sorry for the late reply. I'm still at work :p: Full specs in sig. Cooling is Tuniq Tower with a 3-blade Delta Fan. Planning on trying a TR Ultra120 Extreme this weekend for (hopefully) better temps.

Also, I flashed back from 9/02 bios back to the 4/24 bios and no longer have cold boot issues.

Not sure these settings will help much as I've tried both Praz's and GripS's but neither of them are stable for me. I think it's all about experimentation and finding out what your board likes.
10-04-2007, 04:14 PM
GripS

Thanks very much Dark. I'm priming with your settings right now. I'm running the ram at slightly tighter timings. I'm actively cooling the ram so i gave it 2.2v. http://img2.freeimagehosting.net/upl...a7d28009ed.jpg

4 hours down
10-04-2007, 04:51 PM
ridikolous

i tried those settings still no go at 333 fsb... prime would run but will hard reboot after 15mins of prime... ill stick to what i have now until the dfi lp ut p35 comes down in price.
10-07-2007, 03:04 PM
ridikolous

okay lil bit of update... i was about to prime 333fsb for over 8hrs... i up the vnb 1.3 and change my mem subtiming... tras to 15 and trfc to 38... its not that big of a gain but i can finally prime 333fsb without system hard rebooting
10-09-2007, 12:01 PM
BombieS

Sorry For My Poor English

Full OverClock

http://forums.overclockzone.com/foru...d.php?t=102894

รายละเอียด
Mainboard : DFI Infinity P965 Dark Non S : Bios 424
Cpu : Intel C2D E6750 SLA9V FPO/BATCH#: L724A962 Pack Date 07/27/2007
Ram : G.Skill 2GBHK PC2-8500 1066 5-5-5-15 @ 4-4-4-9-4-25-2-9-9-2-8-5-5-4-4-4 ตลอดการทดสอบ
Vga : Galaxy 8600GT Overclock Edition + Pencil Mod
Power Supply : Thermaltake Tough Power 850W
Water Cooling : Swiftech Apogee GT + Radiator 3*12mm + ปั๊มตู้ปลาโมมาวางข้างนอก

อุณภูมิห้องขณะเทสประมาณ 26-27 องศา ปรกติเวลาเทสจะไม่ค่อยเปิดแอร์แต่พอดีได้ Cpu ตัวนี้มาเลยอยากรู้ว่าถ้าเย็นๆแล้วจะลากไปได้ที่สุดเ ท่าไหร่

หน้าตาของเครื่องก็ประมาณในลายเซ็นต์เลยน่ะครับ

System ของเครื่องก็ WinXP ธรรมดาๆ ลงโปรแกรมตามปรกติเพื่อใช้ในการใช้งานไม่ได้ปรับแต่ง เพื่อคะแนนแต่อย่างใดๆ

ก็ดูตามผลเทสเลยล่ะกันครับจะค่อยๆลงให้ รูปอาจจะใหญ่หน่อยขออภัยด้วยละกันครับ
รูปชุดที่ 1 จะเป็นเน้นการใช้งานแบบ เสถียรๆ ส่วนชุดที่ 2 จะเน้นแบบอัดเอามันส์ น่ะครับ

อันนี้ System ก่อนหน้านี้

P5K Deluxe + E6850 + 8600GT
http://forums.overclockzone.com/foru...ad.php?t=95272

P5W DH Deluxe + E6600 + X1950XT
http://forums.overclockzone.com/foru...ad.php?t=25441

ของใหม่แพงแต่ไม่ได้แปลว่าจะแรงกว่าของเก่าเสมอ ไป

ชุดที่ 1

CineBench & Fritz Chess
http://www.pic2us.net/tb/a357b91a.JPG

Pi 1Mb
http://www.pic2us.net/tb/a0153006.JPG

Pi 32Mb
http://www.pic2us.net/tb/4c2c379a.JPG

Aquamark
http://www.pic2us.net/tb/e64b7b8d.JPG

3DMark2001
http://www.pic2us.net/tb/0aa6242e.JPG

3DMark2003
http://www.pic2us.net/tb/fa8c8846.JPG

3DMark2005
http://www.pic2us.net/tb/0791da1d.JPG

3DMark2006
http://www.pic2us.net/tb/7ebfa8ef.JPG

PCMark05 คะแนนไม่ออกมันฟ้อง Webpage Rendering Fail ไม่รู้ทำไงผมไม่ได้ใช้ Internet Explorer ไม่รู้เกี่ยวเปล่าผมใช้ Maxthon 2.0
http://www.pic2us.net/tb/653ea27b.JPG

Everest
http://www.pic2us.net/full/e0744fc9.JPG
http://www.pic2us.net/full/e0902a8e.JPG
http://www.pic2us.net/full/6d1e485a.JPG
http://www.pic2us.net/full/9bbc4b16.JPG
http://www.pic2us.net/full/0323cf09.JPG
http://www.pic2us.net/full/82efd9ff.JPG
http://www.pic2us.net/full/4212c138.JPG
http://www.pic2us.net/full/99578b24.JPG
http://www.pic2us.net/full/316bdf56.JPG
http://www.pic2us.net/full/00d17665.JPG
http://www.pic2us.net/full/7e98c670.JPG

ชุดที่ 2 เทสมันๆ

http://www.pic2us.net/full/912e63bb.JPG

http://www.pic2us.net/full/dae6847e.JPG

http://www.pic2us.net/full/9116902b.JPG

http://www.pic2us.net/full/430dfc00.JPG

http://www.pic2us.net/full/6e77a7cf.JPG

http://www.pic2us.net/full/64dad657.JPG
10-09-2007, 07:13 PM
Peter-C

Test
10-09-2007, 09:07 PM
Venom-Crusher

Peter-C=Bombies eiei
11-01-2007, 03:12 PM
bankie

My Infinity 965-S is a horrible overclocker. Is there a setting that I'm missing somewhere? The max FSB I can do is 400Mhz. If I set it even 1Mhz over 400 the board will freeze during HD detection during POST. I'm using AHCI mode so POST shouldn't even be doing detection.

I know it's not the CPU or RAM. I was running 3.6Ghz on an Asus P5B Deluxe and 3.5Ghz on a Gigabyte DS3.

Core 2 Duo E6300 (TTBT cooler)
Patriot DDR-533 (worked at >1000Mhz 5-5-5-15)
Enermax Liberty 460W PS
DFI Infinity 965-S Dark
SB X-Fi XtremeMusic
11-11-2007, 12:53 PM
Dark79

I had to RMA my board after one of the SATA ports died. What I got back was the same board with a completely crushed northbridge and a different heatsink slapped on it. Thanks, DFI-RMA :(

I'm too bummed to post the whole story again, but post with pics on DFI's forum: http://csd.dficlub.org/forum/showthr...4182#post34182

Don't think I'll be getting that X38 board from DFI... :(
11-11-2007, 03:11 PM
Nate P.

I just realized how many Thai members there are... I'm half Thai myself (my mom's side), so...

Sawadee!

Show 100 post(s) from this thread on one page