Its a week 17 engineering sample, really goes well at very low Vcore to MHz ratios and also good for some extreme OC's :D :woot:Quote:
Originally Posted by BAR*B*Q
http://i16.photobucket.com/albums/b2...0ne/1M4072.jpg
Printable View
Its a week 17 engineering sample, really goes well at very low Vcore to MHz ratios and also good for some extreme OC's :D :woot:Quote:
Originally Posted by BAR*B*Q
http://i16.photobucket.com/albums/b2...0ne/1M4072.jpg
Got my new E6400 today week 28. Motherboard still holding me back unfortunately but here is my max clock
http://i38.photobucket.com/albums/e1...E64001mill.jpg
:DQuote:
Originally Posted by Jodiuh
Ambient ~18'C and CoreTemp shows around 50'C in SP8M run;)
pffft sure mate 18C ambient heheheQuote:
Originally Posted by Dani
Here in Finland we dont have so cold yet :(
just ordered:
E6600
P5B Deluxe
Patriot PC26400 2x1GB
eVGA Geforce 7950GX2
i don't know why i ordered this, i guess i just couldn't resist jumping on the bandwagon :slap:
E6400 week 24 @ 3.6GHz 1.5V real vCore
Gigabyte DS4 F4c @ 450MHz
Team PC2-5300 3-3-3-8 D9GMH @ 900MHz 4-4-4-10 2.2V
Watercooled CPU, MCH & VPU
9h 9min ORTHOS stable:
http://www.xtremesystems.org/forums/...1&d=1157566066
mine E6600 L623A550 1.58vcore 2.2vdimm
http://img515.imageshack.us/img515/8...x2412x9ww8.jpg
Week 24 6600 on a Asus P5B D. Too bad the 4:5 divider is giving problems. Just put an old 6K series Swiftech waterblock on and the temps went way down. Had to grind down the hold down bracket a bit because when the block sits dead center its right on some caps. Now its cool enough, I think I can give it a bit more core voltage for bench testing.
http://img352.imageshack.us/img352/2...div4438de0.png
http://img506.imageshack.us/img506/7...v443801au3.png
You guys should all try dropping the multi and raising the FSB. Since you all actually know what the hell you're doing (as opposed to me) you'd probably all be over 500 by now.
DS3. Lowered volts and multi
+1 to MCH
That's it and that's all.
ASUS P5WDH with BIOS 1401
E6600, week 24, 1.68Vcore :D
Rhino PC2-6400 2.3V, Pic1 and pic2
Tagan TG580-U22 580W (2Force)
TT BigTyphoon, ambient ~18'C
http://koti.mbnet.fi/dani69/ASUS%20P...0.922s_AIR.gif
Intel C2D E6600 Vcore 1,6125v, Week 27
Asus P5W DH Deluxe
Crucial Ballistix PC2-8000 Vdimm 2,4v just in case:D
FSP Epsilon 700W
Inbox cooler+90mm TT smartfan, Ambient 20c:)
http://img316.imageshack.us/img316/1667/inboxum3.jpg
Dry Ice very soon.:)
I know, stoopid question...
How do I know which "week" I have with a C2D E6600?
Is it in the FPO/BATCH #?
Yes, it says L6XX Blah Blah... XX is week.Quote:
Originally Posted by rob61
P5W DH-Deluxe Vs P5B Deluxe :toast:Quote:
Originally Posted by Evil
http://happy.ap.teacup.com/7193/img/1157729686.jpg
Intel Core 2 Duo E6700
Asus P5B Deluxe
D9GMH PC2-6400 2X1GB
Zippy 600W
pi 32M :slapass:
http://happy.ap.teacup.com/7193/img/1157729856.jpg
Hello people, this is my first post to a forum... but I really wanted to get this out because I've seen no press on the matter.
I have the Bad Axe D975XBX AA revision 305
E6600 not oc'd stock HSF... HSF has been cleaned and reapplied 3X
My system idles at 56C while in BIOS or Windows 2K SP4
same system idles at 43C while in XP SP2
Bringing up properties on the My computer icon shows speedstep active in xp with the box running at 1.6Ghz
The C2D's depend heavily on speedstep to keep them cool.
speedstep is built into XP but requires a driver for w2K.
In the past Intel has made it the Laptop Manufacturers responsibility of supplying the speedstep driver for their particular laptop.
Can we persuade Intel to supply speedstep drivers for the BadAxe?
If not, then a core 2 duo would be a poor choice for any w2k system, if it idles at 58C
Oh and by the way Intel has excellent documentation in the E6xx series datasheets, chapter 5.
Thermal 1 - turning clock on and off
and Thermal 2 - voltage drop and multiplier drop occur at 60.1C
Thermal Trip - The shutting off of the processor occurs approximately 25 degrees over Throttling temps about 85C
wow.. looks like a lot of these chips get a lot of good OC with default vcore. impressive. I'm letting my chip burn in a little at default speed/vcore.. it loads at 26c under water. here's the chip details:
http://star.walagata.com/thumbs/agunn_975x3.JPG
not using this mobo any more on the account of it blew a voltage reg. POS.
Update:
priming now @ 3150 with default vcore!
fsb @ 350 / mem 1:1
Asus P5W DH Deluxe 1401 bios
Update #2:
finally had to add some vcore to stablize 3300. vcore = 1.375 now.. still testing but things are looking good so far! :)
zevia - 3400 MHz Prime Stable (1.40V) | Air - Big Typhoon | Asus P5W DH Deluxe BIOS 1305 | Corsair 2x1GB PC2-6400 (2.05V)
CPU: E6400 Retail L625A452 (Week 25) 3.4 GHz [1.400V]
Motherboard: Asus P5W DH Deluxe [BIOS 1305]
RAM: Corsair XMS2 2x1GB PC2-6400 5-5-5-12 [2.05V]
Cooling:
-CPU: Thermaltake Big Typhoon CL-P0114
-NB/SB: Cooler Master SLC-S41-U1
Case: Thermaltake Armor VA8003SWA Silver
PSU: Antec TruePower 2.0 TC-II 550W
GFX: ATI Radeon X850XT PE
Temp: Idle 34-36C, Load 48-50C
BIOS Settings
AI Overclocking: [Manual]
CPU Frequency: [425]
DRAM Frequency: [DDR2-850Mhz]
Performance Mode: [Turbo]
PCI Express Frequency: [110]
PCI Clock Synchronization Mode: [33.33Mhz]
Memory Voltage: [2.05V]
CPU VCore Voltage: [1.4000V]
FSB Termination Voltage: [1.50V]
MCH Chipset Voltage: [1.65V]
ICH Chipset Voltage: [1.20V]
*Idle*
http://upload.cdfreaks.com/zevia/C2D...@3.4ghz_01.png
*Dual Prime 5 hours*
http://upload.cdfreaks.com/zevia/C2D...@3.4ghz_02.png
http://valid.x86-secret.com/show_oc.php?id=120290
.
just got my week28 E6600 today. It has potential i think. All on air.
Using asus p5b dlx bios 0614. Every voltage are at auto except vdimm 2,05. No problems running thru 3dmark01,03 and 05 at 3500mhz. Also running dual pi 8mb with 3562mhz.
http://img180.imageshack.us/img180/4...31stockoo2.jpg
http://img134.imageshack.us/img134/7...rpi3562bv0.jpg
you might wanna see your real voltage of you CPU in bios (vcore), because on AUTO the board gives ~1,6V+ over 400FSB ;)Quote:
Originally Posted by Turbodream
vcore set manually!!!
Here are my O/C Results:
CPU Speed:
Intel C2D E6300-Allendale (ES)
Running @ 3.5Ghz
CPU Voltage: 1.344v
CPU-Z:
http://valid.x86-secret.com/show_oc.php?id=120576
SuperPi 1.4mod-32M:
http://img119.imageshack.us/img119/5...hz02qa8.th.jpg
Motherboard:
Brand: Biostar
Model: TForce P965 Deluxe
Bios: TForce P965 Stilt Edition
Vmod: VDimm
Cooling Used:
CPU: Watercooling with Swiftech “Storm” Water Block.
Motherboard Chip-set: HSF(Heat Sink Fan) Swiftech MCX-159.
Graphic Card: Watercooling with Swiftech “MCW50” GPU Block.
Radiator: Thermochill 120.3.
Pump: Danger Den DD 12V-D5 Pump.
Reservoir: Swiftech MCRES-MICRO
RAMs:
Brand: GSkill
Model: F2-6400CL3D-2GBGA (1GB x 2)
Rated Speed: PC2-6400 (DDR2-800) 3-4-3-8 Dual Channel
Test Voltage: 2.2~2.4v
Running @ 500FSB, 1:1, CL3-4-4-10 on 2.424v
Ram voltage:
http://img244.imageshack.us/img244/2...m24vwp7.th.jpg
Regards,
htkm1(forum name)
I don't know if my cpu is a bad OCer or if there's some bios settings I ought to change, but my e6600 (week 24 + p5w dh dlx 1305) fails in orthos after 5 minutes @ 367*9 w/ 1.47V. I had to use 1.42V to get 356*9 8 hrs orthos stable.
At 367FSB my settings were pretty much the same as everyone else, however i'm using auto on MCH and ICH (tried 1.55V on MCH + 1.20 on ICH + 1.47Vcore). 1:1 and SPD by mobo enabled and vdimm at 2.15. With these settings I got ~74C on core 1&2 (everest). At 3.2G I get ~68C. Using SCNJ & Papst fan. I also have a 40mm fan strapped to the NB heatsink.
To sum it up, changing mch/ich/vcore didn't seem to help getting it orthos stable, but could there be something i've overlooked? Shouldn't it be capable of doing more than 3.2G? Any suggestions are welcome.
Did you disable C1E? What Rams are you using? What are the Ram Timings? Try increasing the Ram voltage or losen the Ram Timings.Quote:
Originally Posted by Capo Crimini
http://valid.x86-secret.com/show_oc?id=120731
16.281s Superpi mod 1mb
This is sp2004 stable for 6 hours tested so far.
water, 1.475 vcore, f5e bios
I didn´t want to here that, will check later when i get home....Quote:
Originally Posted by heikis
Disabled C1E and all that stuff (except for Microcode update or whatever it's named). Using Corsair TWIN2XP2048-6400C4, tried auto on SPD - which got set to 5-5-5-18 (at 3.2G I can login fine at 4-4-4-12). Tried increasing ram voltage to 2.15 as well.Quote:
Originally Posted by htkm1
http://img346.imageshack.us/img346/7...0037mg1.th.gif
E6400 Week 24 @ 3.76 Ghz
Vcore : 1.55V
Gigabyte DS3 Bios F3
Corsair PC6400C5 ( Elpida )
Artic freezer 7
What's the vcore "pain limit" with air cooling (40mm fan @ 1500rpm)? 1.55V?
I have tried a couple of week 27 E6600's and got in the range of 3400MHz + or - on air with a variety of motherboards. I assume from all threads that I have read here that this is close to the limits of the chip with reasonable voltages on air.
Is it likely that someone would find a week 27 or other week that would do much better or is this about it? (not that I am in any way disappointed.) In other words, if I had opportunity to try one or two more week 27's, would there likely be more high-end to it?
What I have found is one chip (week 27) that has a good bit more capability at lower voltage, rather than one that does more with higher voltage. I am assuming that this would be desirable.
Andrew
My E6600, which I am still testing, hits 3.6ghz with 1.525 vcore, but it's not stable.. I think it might be the 1401 beta bios tho which is causing issues with the mobo at 400fsb.. or I am not being agressive enough with the vcore. anyways... when I get some 12+ hour stable prime data I will post pics and such.. for now:
CPU name: E6600
OC: 3500mhz
Stepping: 6 B2
Week: L625
Code: A404
Vcore: 1.500v
Cooling: Water
Cooler brand/model: Swiftech Apogee
Motherboard: ASUS P5W DH Deluxe
Bios Version: 1401 beta
RAM brand: G.Skill 2gbhz 4-4-4-12
RAM actual speed: 778mhz (1:1 fsb @ 389)
RAM voltage: 2.05v
additional mobo settings:
Performance Mode: [Auto]
PCI Express Frequency: [100]
PCI Clock Synchronization Mode: [33.33]
FSB Termination Voltage: [1.50V]
MCH Chipset Voltage: [1.55V]
ICH Chipset Voltage: [1.20V]
was going on 8 hours dual prime stable this morning before I left the house
STILL TESTING!!
kempez - 3600MHz Dual Prime Stable | 1.65v | Swiftech Storm| P5W DH Deluxe | GSkill PC2 6400 (CAS 5)
Max Stable OC 3.6GHz (400 x 9). CPU @ 1.65v, vmch at 1.6, FSB at 1.4v. No mods, just a plain sxy case to wrap it in :D (clicky)
http://www.overclock3d.net/thumb.php?id=2441
http://valid.x86-secret.com/show_oc?id=111144
wow! 1.65v. I guess I am not being agressive enough with vcore.. I only tried up to 1.55v and 3600 was just a tad unstable.. I'll try more vcore tonight. :)
Week L627A795 E6600/MSI 975X Plat.
Bios 1.52v, board measures 1.47v
http://home.comcast.net/~phippy1/MSI6.JPG
E6400 L627A730
MOBO: gigabyte DS3 (bios F3)
COOLER: Watercooler Nexxxos xp
---3350mhz@ vcore default
http://img228.imageshack.us/img228/4...top5lr1.th.jpg
---3570mhz@ 1.425v
http://img520.imageshack.us/img520/2...143vbc4.th.jpg
---3616mhz @ 1.45v
http://img257.imageshack.us/img257/5...146vnv4.th.jpg
need another mobo that run 500 FSB :D cause this CPU seams to be a lot of potencial
my friend with a E6400 with exactly same batch L627A730 Already run 4026Mhz Aircooled but he have a P5 deluxe :D
regards
If you have a p5b-deluxe, could you lower the muli on an e6600 "retail" to 8 and set the FSB to 400 instead of 9 x 355 to reach 3.2Ghz and are their any benefits in doing so?
My goal is the reach the overclock that an e6400 has but with a e6600, or am I headed into gunfight with a spoon. :confused: :hitself:
yeh you can lower the multi to x8 on a E6600 and set FSB to 400 or more and its better cause you take more benefits from your ram 1:1 ;)Quote:
Originally Posted by Knight
regards
Thank you.Quote:
Originally Posted by mascaras
I am still unsure about one more thing. Will I be able to reach a higer overclock with the same Vcore if I choose to lower the muli? (IMO no)
I would just like some one with experience to tell me what they think.
Asus P5B Deluxe WiFi AP (bios 0514)
Intel Core 2 Duo E6400 @ 3.4 GHz (8x425) 1.4V
Stepping: L626A319
Thermaltake Big Typhoon
Team Group 2x1 GB PC2-8000 @ DDR2-1063 (5-5-5-15) 2.15V
Orthos Blend stable for 4.5+ hrs.
http://img127.imageshack.us/img127/6...le45hrsdn7.jpg
Shouldn't this be stickied?
Tested out my 6600 ES, B1.
3.6 Ghz ORTHOS small FFT stable 1.37v in bios, 1.34v actual
http://img.photobucket.com/albums/v7...ntel/ES5-3.jpg
room temp = 73F = 23c
watercooled
This thread was stickied but it got unglued due to... probably... lack of updates. This is not to knock K.I.T.T. of course, he's doing us all a favour by having a go at this OC-DB malarky at all. The rest his daily life (life beyond XS? pffft :D ) stuff is probably getting in the way of more frequent updates :)Quote:
Originally Posted by Absolute_0
Well only have this system up and running about a half hour, impressed so far
http://i13.photobucket.com/albums/a2...rpi1m32ghz.jpg
http://valid.x86-secret.com/show_oc?id=121273
nice chip :)Quote:
Originally Posted by Absolute_0
4ghz, 1.6v+ ? :D
Probably, although my stupid Badaxe with the IDT chip can only overclock past 30% with Systool, which maxes at 400 FSB. So 3.6 Ghz tops until i get a new board or a better clockgen for IDT.Quote:
Originally Posted by Supertim0r
oh, this is a new board rev ?Quote:
Originally Posted by Absolute_0
my "old" 304 is good for 460 bios (1333) or 400 to 460 1066 with systool
grab a p5b dx and put some cold on this cpu ;)
*E6400@ 3.2GHz 12hr ORTHOS Stable* (*1.385v*) | *DangerDen TDX* | *Asus P5W DH 400FSB* | *Mushkin xP 6400 @ DDR800 4-3-3-8 1:1*
http://img231.imageshack.us/img231/2746/prime95xz6.jpg
http://justoverclockit.com/pics/dq64002.jpg
CPU Host Clock Control [Enabled]
x CPU Host Frequency(Mhz) 400
PCI Express Frequency(Mhz) [100]
C.I.A. 2 [Disabled]
System Memory Multiplier [2:2]
Memory Frequency (Mhz) 800
DIMM OverVoltage Control [+.1] This starts at 1.8 and then you can add in .025
increments
PCI-E OverVoltage Control [Normal]
(G)MCH OverVoltage Control [Normal]
FSB OverVoltage Control [Normal]
CPU Voltage Control [1.3125]
And the timings are 4.4.4.12 as per my ram specifications.
More Here
What would you buy if you got 500€
Sys:
E6300 2940@1,25V
P5W DH Dlx.
1gig 533 cheap crap
X1600XT because i´m only using an 15" Monitor..
would you buy a new cpu oder would you buy Memory, and what kind of Mem would you buy?
Quote:
Originally Posted by VL125
Normal Ram and a 17/19" monitor :p:
Some TeamGroup or corsair/kingston :) Check the Xtreme Bandwidth subforum for some memory OC's.
I'm running at cpu60c/sys55c at 3360 mhz (9x420) My sys temps used to be 45c but then I tried to check my NB heatsink and busted the plastic pins holding it on. I reattached by using artic silver thermal epoxy and then put a 50mm fan on top of it. My question: Is Sys temp same as NB temp?
as anyone seen any results from a week 22? just got hold of a cheap E6400 L622A698 but still havnt decided on what board to get lol
dont know if i should go for DS4, DQ6 or P5W DH Deluxe (just never been keen on asus)
P5B-Deluxe... ;)
Jepp, P5B Deluxe might be the best Board for an Allendale, a P5W isn´t bad but it won´t be easy to run FSB 500+
Thanks to my buddy New-b i can clockgen past 400 Mhz FSB.
This is all 1066 strap Badaxe 1.72v vMCH, ram 4/4/4/12 1:1 good stuff.
6600 ES-5 B1 @ 3.77 Ghz small FFTs stable, 1.45v in bios :D
http://img.photobucket.com/albums/v7.../Intel/3-3.jpg
3.84 Ghz stable with 1.50v in bios :)
That's 1.465v actual!
http://img.photobucket.com/albums/v7.../Intel/3-4.jpg
So does anybody know if sys temp is actually NB temp?Quote:
Originally Posted by RDTS
How do you post screen shots?
Thanks
and large ? :PQuote:
Originally Posted by Absolute_0
P5W is the best board for Conroe :)Quote:
Originally Posted by VL125
Which is the best week generally for the E6600?
27/28... but it all depends on luck. some 27/28 just suck
my 28 isnt bad
Large FFTs are even easier. Coretemp reports higher load temps with small FFTs so I run small more often. I can run large later tonight.Quote:
Originally Posted by Supertim0r
But TBH i'm having trouble with long term stability with > 410 FSB. It will run up to 440, semi stable up to 424, but if i let it run for a long time it gets reboots.
same thing happened with my ES6700 b1Quote:
Originally Posted by Absolute_0
Just set up the Asus P5W DH Deluxe, E6600, Corsair 2 gig ram, 7600GS video. When I run 1.36 of CPU-Z, under CLOCKS it only shows Multiplier value. The core speed, Bus Speed, and Rated FSB are BLANK. I used the Asus AI to adjust overclocking to 30%, which it did without any problems. So why don't values show up with CPU-Z?
E6400 batch L627A730
cooler : watercool nexxxos xp silver
mobo : Gigabyte DS3 (F3 bios)
Ram : Teamgroup PC 5300 CL3-4-4-8
E6400@3300mhz@ 1.33v || ORTHOS -Blend Test
http://img153.imageshack.us/img153/1250/3300135vyo7.jpg
CPU: E6300 @ 3150MHz (450x7)
Mobo: DS3 w/ F5 bios
Memory: A-data Vitesta ELJKD1A16K DDR2-533 2x1GB @ 4-5-5-12 DDR2-900 2.2v
Vcore: 1.375v
Cooling: Stock
TSFroggy - E6300 @ 3150MHz Dual 32M SuperPI (1.375v) | Stock cooling |
GA-P965-DS3 | A-Data Vitesta ELJKD1A16K 4-5-5-12 450MHz 1:1
http://www.gvice.com/yukado/3ghz.jpg
P5W Deluxe.Quote:
Originally Posted by gundersausage
????? What week is that? j/kQuote:
Originally Posted by GNU
it appears the mid 20's are giving good results, across all models
My week 24 sucks ... or the Scythe cooler is sh*t. Either way it's tempting to buy a TTBT and see how that performs on my chip.
who want something to laugh? ;)
Ive tested 7 Boards in the last 3 weeks....
Quote:
Originally Posted by VL125
lol 7??? Didnt like any of them then?!
OC'ing is a hit and miss story. None can guarantee u anything... ;)
I´ve tested 4 P5W DH, one was killed....-.-, 1x Dq6 and a DFI i975X and in the next days a P5B Deluxe Wifi will arrive.
Sry for my English, i hope you understand what i mean..i hate the german language...:(
you can call me a sick bastard, but i think i have to go to a psychologist...
Relax.Quote:
Originally Posted by VL125
We won't blame you for being a hardware-junkie.
Won't we?
:D
Ive heard that the newer the week of ur conroe cpu is the better they clock.. I read this on a forum somewhere.. Can anyone of you guys tell me whats true about this? Since i got a week 29 it would be cool tho..
Regards
At these settings my 1rst core fails Prime and orthos while second is fine...
Should a raise VCOre more?
http://img158.imageshack.us/img158/8369/1srtfg0.jpg
http://img228.imageshack.us/img228/3119/2ndvo8.jpg
Ram is some twinmoss 5300 with 5-5-5-15 default timings which i run 1:1 at 4-4-4...:)
E6300 Week 25 @ 3.5GHZ with 1.45v (set in bios)
http://s2.supload.com/thumbs/default...0922053335.jpg
:D Week 24, 1.575 Vcore in BIOS:
http://img133.imageshack.us/img133/3636/sp1m4005ue2.jpg
:banana: :banana: :banana:
So... umm is ES better or is Retail better?
Looking to get an E6600.
please don't post :banana::banana::banana::banana: in the forum - some of us are at work or don't want to see huge, ugly, fake tits.
Ugh... wtf...
wow
It's huger than fake boobs!
Week 24 E6400. 1.425 vcore. Corsair PC6400 CAS5 ram @ 500mhz
You'd probably want to remove that pic m8.
Not because its probably against the rules, but damn man, that hag is ugly!
She wouldn't get a kick in a stampede........
Yes, please do. I'm also at work and that kinda thing can ruin my "interweb research" time.
seems as if the list in the first post hasn't been updated in quite a while.
bummer, that. i'd really like to see some more info on what week to look
out for when buying an e6600.
so far 624 seems to be good. the chip i have right now is utter :banana::banana::banana::banana:e...
and by utter i mean barely 3ghz on water - with 1.5v even. this is my
worst cpu ever, of all times. epic! wtf...
so any advice is greatly appreciated. from what i hear some of the latest
stuff is supposedly also quite ok, but what is the absolut bomb to get -
and no, retail boxed stuff, not es
http://s2.supload.com/thumbs/default...0922230135.jpg
fully stabled @ 3.5 with 1.4625v (set in bios)
Hey guys, I have a question:
I'm currently testing at 3.4Ghz (378 x 9) and my memory timings seem to be too loose. I have OCZ 2GB PC2-6400 XTC:
http://img172.imageshack.us/img172/884/timingsox0.png
How much can I tighten them? Can they run at their rated timings (4-5-4-15) at this speed?
:D Push it and give some juice to it - everything beyond 500MHz C4 is a disapointment at all......... :stick:Quote:
Originally Posted by Mr.X
http://img111.imageshack.us/img111/5...2m37ghzwu5.jpg
;)
Something a little more specific?Quote:
Originally Posted by camouflage
EDIT: In order to get a stability in orthos, should I change something else (like fbs voltage, pci-e freq etc.) other than v-core?
Its funny because I have not seen any "great" week. Every single week has crap chips and good chips. For instance I see a guy at 4gigs and a guy at 3.5 with week 24's yet mine pretty much sux. I am having 400fsb issues with my mobo (will endless reboot after 7 hours stable prime....wtf) so I cannot top out my chip yet but considering at 3.4gigs I need 1.537v to get it stable, it isnt looking too great. Dont get my wrong, acheiving a 1gig OC blows my mind (fought for 600 with my a64 3200+) but I had a bit higher hopes.
got 4H of Orthos stable @3700 , 3750 2 H , managed to run SPI 32M and all
Marks at 3800.
http://img77.imageshack.us/img77/2826/o37501h30xk7.jpg
http://img49.imageshack.us/img49/420...3800an9.th.jpg
Is this what you have ? "Ocz Platinum Xtc PC2-6400 2GB 2X1GB DDR2-800 CL4-5-4-15 240PIN Dimm Dual Channel Memory Kit"Quote:
Originally Posted by Mr.X
As Far as i know that memory is designed to run at CL4-5-4-15 @ 400 Fsb stock.
People have reported success overclocking those modules up to 490+ FSB, more if lucky @ at 5-5-5-15.
any of you guyz tried GoodRam 6400's.Best bang for the buck if you ask me.Great clockers.
Got myself a whole new mobo to go with my ram and cpu. I got myself this Asus P5WD2-E Premium with Vcore, Vdimm, Vdroop and Vmch mod wich are adjustable with litle pods(the ones you need a skrewdriver for.. dunno how theyre called in englisch).
http://img.photobucket.com/albums/v674/sero/2222.jpg
And here is a pic of the mods:
http://img.photobucket.com/albums/v674/sero/28122.jpg
How will this go with my E6400? Since I havent tried yet.
Regards
My E63 (wk 29) does 3.01ghz at stock vCPU with G.Skill PC2-5400. I obviously have lots of room to go further and you should too.
6hr's stable on orthos too.
How about 95% over on a week 24 Allendale OEM :)
P5B-D
E6300
Water Cooling
Corsair 8500C5
http://img102.imageshack.us/img102/9...over160cc6.jpg
anyone getting any newer week E6600's? The latest ive seen is 28. Any 29's or 30's floating around?
Jup have a week 28 and 29 E6600 here... Nothing special.Quote:
Originally Posted by Budwise
P5B-Dlx
E6300
Watercooling
SuperTalent PC2-8000
http://people.freenet.de/chris070719.../SuperPi-2.jpg
E6600
Week 27
el cheapo Gigabyte S3 can't boot over 401 FBS
1GB crucial ballistix pc5300
http://img215.imageshack.us/img215/7...0mhzmn9.th.jpg
E6700
Week 29
crappy DFI with 8/30 beta bios
2GB OCZ pc2-7200 ram
http://i65.photobucket.com/albums/h2...9/1m1m1m1m.jpg
if i have at stock 38C its ok ? with Ninja, cuz i see people with less...
http://img142.imageshack.us/img142/2...7213932yw0.jpg
what week is this ?
http://img142.imageshack.us/img142/4...ture006mg0.jpg