for meQuote:
Originally Posted by andressergio
f8x > f7f > f7e
Printable View
for meQuote:
Originally Posted by andressergio
f8x > f7f > f7e
I think F8X tightened ship and effeciency dumo, probably just have to back off a timing or 2.Quote:
Originally Posted by Dumo
f7x/f7e ;)Quote:
Originally Posted by pazza316
boring my gigabyte 6970 was dead ... sending to RMA
looking for some spare VGA Card
@ Dumo - Great overclock fantastic chip you have there!
Thanks OC Nub and Jack:D
'06 with bios F7f @ 5.75G and HT on, 2GB D9GTR @ 1.88Vdimm...Asus 560Ti stock air. My 2004 SS still can hold this one
http://img155.imageshack.us/img155/6...enshot040l.png
What cooling are you using?Quote:
Originally Posted by Dumo
Dumo ...great chip and great OC :) How I wish my chip is like yours :D I can only do 52 x 100 now :(
@maxxx ... lemme try f7e on my day-off :) I hope it will be at par or better than f7f :D
Stock Prometia MachII GTQuote:
Originally Posted by jackbrennan2008
http://img254.imageshack.us/img254/5...nshot042tg.png
@Bart..Thanks:)
thats GTX470 :DQuote:
Originally Posted by the_real_7
Have you tried dropping multiplier or trying the higher multiplier?Quote:
Originally Posted by Dumo
When i say drop multi, i mean increase BLCk to see if you can get a few more MHZ?
The maximum with GigaUD7 and BiostarT67 boards is 58X 99.8 (and any combination multi and bclk to 5.79Ghz) and not 0.1mhz. more. Probly Intel forgot to lock 56X and 57X multies on this cpu, but it sure to clamp 58X:DQuote:
Originally Posted by sin0822
Haven't try it with MIVE though...who knows:)
No i meant drop the multi down to 56 or 55x and boost the blck. You haven't even used the 58x yet. i have seen 5.8ghz on this board, but with lower multi. The board wont allow blck to be raised more than 99.8 at 58x??
http://valid.canardpc.com/show_oc.php?id=1653519
I think its a freq. wall @ 5.8Ghz for this cpu. Any combo of multies and bclk as long as not 5.8G is fineQuote:
Originally Posted by sin0822
Hi , i thought that error code was caused by incorrect vcore?Quote:
Originally Posted by Dumo
I only ask as i have gskill as my sig and i have had some of this error too, seems to of disappeared at the moment though which makes me think its not my ram
Do many of you use 8 gig kits , what are the thoughts on 2x2Gig over 2x4Gig for overclocking the cpu that is ?
Probly...But I replaced rams and now run ok and no more bios corruptionQuote:
Originally Posted by andyr(uk)
Hi sorry saw the replies about the code now a couple of pages back.
anyway 7h is on Tweaktown !
Easy Tune6 (Intel) B11.131.1
http://download.gigabyte.us/FileList..._et6_intel.exe
Are we eventually going to see 2400 for memory selection in an upcoming bios?
Yea that code either needs more IMC or vcore voltage. Corrupting BIOS has a lot to do with a lot of settings, its not just one problem. LOL i like your avatar AndyrQuote:
Originally Posted by Dumo
I noticed today after flashing back to f7e, scores take a hit in 3dmark tests. In Return to Proxycon 3dm05, I havent tested but I assume in 06 also, the opening scene I normally see 234-236fps in the ship, with f7e they drop to 200 and frames throughout the test look low. Flashed back to f8x and they are normal again. Anyone else notice this?
thats interesting to know nub i've tried all the bioses and settled on f6x as it uses the least vcore for same overclock for me of all the bioses, anybody on the f7h, any opinions
I will try f6x again, I only used it for a couple hours.
I picked up a Gigabyte GTX470 Soc. It clocks better than the EVGA 470sc but in sli they run like chit. I can score higher with my gtx460's. :shrug:
the card in first slot is probably throttling or overheating i have the same cards setup :(
the cooler is not great for tight space SLI imo