The Phenom II List of Overclocks

Printable View

Show 100 post(s) from this thread on one page

02-11-2009, 05:45 PM
mcbalaban

Mmmm, I apologize for a noob question, but what's the story with CPUz and OCCT not detecting my vCORE?

Plus ASUS probe says 1.5V while it should be 1.35 according to the BIOS?

The combo is PII 940, ASUS M4A79 DLX, Vista 64, latest versions of CPUz & OCCT...
02-11-2009, 11:02 PM
Lastviking

Quote:

Originally Posted by Titan7171

Ive tried lowering it to 1.4v and I get bsod while playing games:shrug:

Hmm what NB voltage do K10STAT show you?
02-12-2009, 06:58 AM
crazydiamond

no submissions yet, buttttt,,,

0850epdw
80537

this is my new toy =) not a great chip, i had a chance to poke around with it last night for awhile and i think its an avg clocker. validated @ 4.125 no problem, didnt keep pushing. its running occt right now 15x250 for 3.75ghz @ 1.47v, 25 minutes in. in my closed case, temps are(hwmonitor): max temp 50c, idle 32c, ambient 23c. this is on xig s1283 w/ 2000 rpm fan nothing fancy, illl be putting a ultra kaze 3000 on it probaby in the near future

edit: passed occt with those settings, touched 50c 1 time otherwise sat around 47-48c... time for more mhz :D
02-12-2009, 07:07 AM
stajerc

yo guys i got a question, does upping the northbridge frequency on the phenom 2 show any performance increase. ive got a phenom 2 940be with 1066 ddr2 ram from ocz and asus m3a79-t deluxe motherboard. got ti to 3600mhz on 1.45v but just by changing the cpu multiplier to 18, so im wondering if its worth upping the nb speed.
02-12-2009, 07:08 AM
crazydiamond

short answer yes
02-12-2009, 07:55 AM
stajerc

how much % ?
02-12-2009, 08:07 AM
Stuen4y

A validation from today's torture :): 4290.07MHz@1.536V
http://valid.canardpc.com/show_oc.php?id=505928
The most interesting thing was that the cpu clocks better on the stock multiplier(x15) and bus increase.
P.S. Would the first post of the thread be updated anymore or?
02-12-2009, 10:57 AM
chew*

720 BE AIR Result without dropping HT/NB speeds

Stepping
http://members.cox.net/nfridenti/720BE.jpg
http://valid.canardpc.com:80/show_oc.php?id=506108

http://valid.canardpc.com/cache/banner/506108.png
02-12-2009, 12:14 PM
Titan7171

Quote:

Originally Posted by Lastviking

Hmm what NB voltage do K10STAT show you?

1.45v

Im a little confused though K10stat is showing me cpu voltage as 1.46v instead of 1.55v that cpuz shows.
02-12-2009, 12:17 PM
Blazer_

Quote:

Originally Posted by crazydiamond

hey blazer what bios are you using?

Hey, i used the newest bios.
Now i ahve my Asus M3A79-T Deluxe.
I can't get my 24/7 clocks anymore.. :down:
With Foxconn 14.5x250fsb and Ht and NB multiplier was 9 and vcore 1.45v.
With Asus canät but those :mad:
I have now 17.5x200@1.4327v + VDDA 2.5v and Ht and NB 2.6GHz@1.4v
(With 1.45v it didn't pass Linx)

I don't have newest bios..yet.
I Just don't know why i cant get even 250fsb stable.. :(

This is weird, but next week i will do new records, i amd trying get 4.4GHz CPU-Z Validion and 4GHz wprime 1024m record and run 32m max what i can get..

Maybe try fast 3Dmark06 with 4.1GHz.
02-12-2009, 12:52 PM
Zeus

Guys, just popped in my Phenom II 940BE.

It runs 3.6GHz and 2.6GHz NB on stock voltage stock cooler.

It even ran Prime but it bluescreened probably due to high temps.

Did SuperPi 1M at 3.7GHz easy.

http://img.photobucket.com/albums/v6...hots/18sec.jpg

Stepping:
http://img.photobucket.com/albums/v6...s/IMG_5575.jpg

Don't know if this good?
02-12-2009, 01:02 PM
cdawall

just ordered me a 720BE

http://img.techpowerup.org/090212/Capture042377.jpg

hopefully it will be here tomorrow
02-12-2009, 01:07 PM
chew*

Quote:

Originally Posted by Zeus

Guys, just popped in my Phenom II 940BE.

It runs 3.6GHz and 2.6GHz NB on stock voltage stock cooler.

It even ran Prime but it bluescreened probably due to high temps.

Did SuperPi 1M at 3.7GHz easy.

Don't know if this good?

Bluescreen = unstable, not temp related. 1mb PI is cake even unstable, try cinebench,3d06. looks decent though, likely 3.8 24/7 with good air.
02-12-2009, 01:22 PM
crazydiamond

on my 0850epdw i can get 3797mhz 1.504v occt stable 245x15.5 -- 51c was max temp,,, ill finetune my v's and run it again for a screenshot in the near future.... overall 3.8ghz 1.5v <52c max temp = i am :banana::banana::banana::banana:ing happy!
02-12-2009, 01:23 PM
Stuen4y

Quote:

Originally Posted by chew*

720 BE AIR Result without dropping HT/NB speeds

Stepping
http://members.cox.net/nfridenti/720BE.jpg
http://valid.canardpc.com:80/show_oc.php?id=506108

http://valid.canardpc.com/cache/banner/506108.png

On water, right?
02-12-2009, 01:27 PM
KELL5

Quote:

Originally Posted by cdawall

just ordered me a 720BE

http://img.techpowerup.org/090212/Capture042377.jpg

hopefully it will be here tomorrow

nice one cdawall, be sure to post oc results :)
02-12-2009, 01:29 PM
cdawall

Quote:

Originally Posted by KELL5

nice one cdawall, be sure to post oc results :)

will do hopefully i beat chew*
02-12-2009, 01:31 PM
Zeus

Quote:

Originally Posted by chew*

Bluescreen = unstable, not temp related. 1mb PI is cake even unstable, try cinebench,3d06. looks decent though, likely 3.8 24/7 with good air.

Ok, done:

http://img.photobucket.com/albums/v6...inebench-1.jpg

First time i ever ran that bench, it's boring.
02-12-2009, 01:39 PM
Stuen4y

Quote:

Originally Posted by Zeus

First time i ever ran that bench, it's boring.

Try SPi 32M and you'll beg for the end. :D If you want colourful tests don't search them in the cpu part of the forum.
02-12-2009, 01:45 PM
chew*

Quote:

Originally Posted by Stuen4y

On water, right?

Clearly says AIR at the top...what you quoted no less.
02-12-2009, 01:47 PM
chew*

Quote:

Originally Posted by Zeus

Ok, done:

First time i ever ran that bench, it's boring.

Had to drop NB down a tad ;)
02-12-2009, 01:49 PM
KELL5

Quote:

Originally Posted by cdawall

will do hopefully i beat chew*

I must be blind, cheers for bringing it to my attention :up:

Quote:

Originally Posted by chew*

720 BE AIR Result without dropping HT/NB speeds

http://valid.canardpc.com/cache/banner/506108.png

nice result indeed chew, that on air yeah with stock cooler or 3rd party HSF?
02-12-2009, 01:59 PM
Zeus

Quote:

Originally Posted by chew*

Had to drop NB down a tad ;)

I will try with more NB clock. ;)
02-12-2009, 02:03 PM
chew*

Quote:

Originally Posted by KELL5

I must be blind, cheers for bringing it to my attention :up:

nice result indeed chew, that on air yeah with stock cooler or 3rd party HSF?

I dunno does an OCZ vindicator (Scythe ninja knockoff with worse temps ) perform better or worse than PH II stock cooler? I think its a preety close one :p:
02-12-2009, 02:04 PM
Rammsteiner

My PSU arrived!

Installing watercooling next few days, I hope this will give me 4Ghz or more.

Also Dominator RAM cooler came in, might actually re-install my Transcend Axe RAM's (N, aka D9GMH).

Show 100 post(s) from this thread on one page