Do you have a link to the 0006 bios?:)Quote:
Originally Posted by angelreaper
Printable View
Do you have a link to the 0006 bios?:)Quote:
Originally Posted by angelreaper
http://www.fileden.com/files/2009/7/...ELUXE-0006.zipQuote:
Originally Posted by Rasmus66
:up:
Thank you:)Quote:
Originally Posted by angelreaper
Can i use EZ Flash or is Afudos the only program i can use to crossflash the board?
Use only afudos to crossflash the board. No other way;)Quote:
Originally Posted by Rasmus66
Okay thanks m8:)Quote:
Originally Posted by angelreaper
I have just tried to crossflash my board but afudos just reports a fail.
Im using afudos version 207 and the dos command im using i afudos /i0006.ROM is that the right command for flashing the bios or what?
Edit:
Nevermind it works now
Had to use another version af afudos and i found the right command. Flashet the board with the 0006 bios and the two settings im was missing is in the bios now:D
boot 234 bclk
http://www.youtube.com/watch?v=6Kv1QbOyQ0o
Please share with us which version you used and the command line you used.Quote:
Originally Posted by Rasmus66
P6T boot 236...
http://www.myalbumbank.com/albums/us...0464/8_158.jpg
That video was rather low resolution, but on the screen it appeared to read 234 X 17 = 3.978 GHz. If so, then why not just do 200 X 20 = 4.0 GHz, which is what I run 24/7, nothing special.Quote:
Originally Posted by maax990
Now, 5.078 GHz, that is impressive. What's being used for cooling and how long is the chip being run at that speed?Quote:
Originally Posted by road-runner
.
Same thing I thought I saw...Quote:
Originally Posted by astrodanco
SS OCZ Cryo Z, I just used it a few hours for forum wars...Quote:
Originally Posted by astrodanco
If you use afudos you will get a bad command fail.Quote:
Originally Posted by angelreaper
The correct command is afu236u /i0006.ROM /pbnc /n:)
Hello friends .... back from the "dead" ..... how is the sceene on P6T v2 ?
Thanks,
J
EDIT: Cross-flash ???! WOOWWWW what are you guys "cooking" men !!! :eek:
Can some one give me a short resume please ? ;)
I'm running 4200mhz now, 21*200 @ 1,33v HT on (1,33v qpi, 1,14v nb), and it's rock stable.
Tested 50 passes linx and 8h Prime95.
But I want to go higher, 4,4 would be nice but its hard to get stable.
I tryed with cpu voltage up to 1,43, qpi 1,375, NB 1,22 and it fails after ~20min linx.
I have the memory on 9-9-9-25 @ ~1680mhz and it is specced for 8-8-8-24 @ 1600mhz so I don't think they are the problem.
I'm using i7 920 D0, P6T Deluxe v2 and Corsair dominator.
Anyone have any suggestions?
Or should I just up the cpu voltage more and see if it passes?
How much qpi voltage is considered "safe" for a 24/7 clock?
Im running 4600 mhz right now on h2o:)
220*21 vith 1,45 vcore, 1,35 qpi/vtt, 1,24 nb stable for benching 3dmark and superpi.
Bios 1611
ftp://ftp.asus.com.tw/pub/asus/mb/lg...ELUXE-1611.zip
[ 1611 ]
----------------------
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/c...Language=en-us
new features on 1611 ?
P6t Deluxe V2
ftp://ftp.asus.com.tw/pub/ASUS/mb/LG...XE-V2-0606.zip
Quote:
Originally Posted by jVIDIA
did you reD MY POST??
I have seen in the past, Asus does not list every changeQuote:
Originally Posted by Fire4Wire
Anyone OCing better using the 0006 bios on a P6T v2 then with the oficial V2 bios ? using the same vcore ?
Anyone cross-flash P6T Deluxe to P6TD Deluxe?
I am with P6T Deluxe and 0007 bios, and I hit 4.34Ghz on 920 C0 stepping. I got 4.4Ghz stable, but the temperature was too high.Quote:
Originally Posted by jVIDIA
:welcome:Quote:
Originally Posted by spiridoncho
http://www.xtremesystems.org/forums/...postcount=1190
http://www.xtremesystems.org/forums/...postcount=1196
:up:
Thanks angelreaper;).
I asked because in the future if ASUS stop support for P6T Deluxe to know if I can put BIOS from P6T Deluxe v2 or P6TD Deluxe.
Elsewhere I'm not saw someone being cross flash v1 in v2.
I know to the contrary from you.
For now 0007 works fine for me.