Yes, in my 1,5ghz laptop:D Works fine.Quote:
Originally Posted by D_A
Printable View
Yes, in my 1,5ghz laptop:D Works fine.Quote:
Originally Posted by D_A
Make sure your beast has legacy usb, usb 1.1 ... pretty much everything usb enabled. It's got to be something in there somewhere.
Nice rig jcool.
It's nice to have found a thread with Harpertown fans. :up:
PS2 and wireless do not mix well.. thats all the info I can give. I usually toss ps2 wireless stuff out ;)
Would also have tossed it, if I didn't get it working last night:D Simply connected only the USB, but in another port:shrug: Is there a difference in the onboard ports or is is the port I used first maybe faulty?Quote:
Originally Posted by STEvil
You're only looking at 5v. If there's any dust/grime/dirt it hasn't the nads to break through.
What are your BIOS setting concerning USB (quantity and speed)?Quote:
Originally Posted by angelshonnny
8 USB hi speed. There's also the full speed option, but high speed was deault,so I left it like that. It works now, so I can't be bothered about the one port right now:) Thx for the help guys:up:Quote:
Originally Posted by Madman666
I'll have to wait until I migrate drives again as I'm not going to remove Windows in order to perform the tests! The arrays seem to perform well in general benchmarks, they just lock up under heavy write operations, such as installing a program from a 1GB+ MSI etc...Quote:
Originally Posted by jcool
Has anyone tried with the JMB external RAID controller? Does it perform better? I have 1x PCI-E JMB controller that worked very well with my old system. The only reason I didn't carry it over to this system is the bandwidth limit of the 1x PCI-E interface
not with the pci-e, i have ran a SCSI controller in pci-x, with 3 drives in Mirror, runs ok, but it was very loud... so i went to sata raid with 4 drives on onboard
Are you running Windows on the RAID array? Are you experiencing any momentary lockups?Quote:
Originally Posted by shanems3
I'm running my OS on the raid 5 array too BTW, no slowdowns or anything, but it's just a traditional HDD array so why should it...
none what so ever , 4 250hdd sataII in raid 0, and 1 sataII 1 TB as concentrated drive for storage.. no slow downs except on storage drive when windows turns it off ... raid drives stay on..Quote:
Originally Posted by drewhemm
No lockups, just speeeed...Quote:
Originally Posted by drewhemm
5x 1TB WD RE3 in Raid 5 = :hump:
Yeah WD drives in Raid 5 on the Adaptec really kick arse don't they :D
My array is full btw.. I think I need to get a 5805, think it will recognize the array so I can expand? Or maybe I'll just add a 5805 and span the array between the 2 cards :ROTF: :shocked:
No , that will cause conflicts ... ;)
I think it's better to get a new 5805 and sell that 5405 to me
Hehe, that'd be another option I'd be willing to contemplate.. but damn it what the hell happened to server-stuff pricing? Not only the Z7S went through the roof but also prices on raidcons... argh!
we run raid5 scsi at work, that is the biggest pain in the ass.. when we loose an HDD in the array, it take an act of god to add a hdd and restore the 3 drive array... do you guys have that trouble with raid 5 array's?? we use adaptec 2130s for the raid card on winxp 32bit..
No, I once rebuilt my Raid 5 just to see if it worked.. after a few hours it was completed fine.
hey all,
ive stubbled onto another problem with my setup,
im pretty sure its psu related because everytime i run a prime95 i get a lock up and am forced to reboot, this all happened after adding back my second 4870x2 and adding an additional 1tb wd drive,
but my psu is a thermaltake 1200w cablemanagement psu, shouldnt this be well over enough poweR?
also. i have only 1 cpu on my z7s ws, so my 4pin mobo connector is NOT connected, should i connect this? will it make a difference?
thank you!
:coffee:My system died last night:dammit: I t had been running at fsb420x7.5 for 3 days rendering some building models without any problems. Temps were fine, running max 52c and 38-42c idle, Ram max 65c. So yesterday when i got home my wife said that it had shut down twice during the day :shocked::confused: she's been working on a school project, nothing serious, only Office and internet running, so nothing suspect there. I just installed a second display day before, but that shouldn't a problem?? I opened cpu-z and it showed only 6 cores:confused: I restardted, lowered the fsb to 400 x 7.5 and then save and exit, and now it doesn't power on. Tried to clear CMOS, no luck:( The LED on the mb comes on, but no fans turning no HDD running nothing. What the H:banana::banana::banana: could it be? power supply? Is it :eek: news?
Sorry to hear that :(
What does the debug card say?
That really s..ks.Quote:
Originally Posted by angelshonnny
your CPU cooling was still up and running ?
A year back my pump died, and 2 minutes after my CPU also :mad::(:(:(:(:(
yeah, what does your GP diag card say?? FF??Quote:
Originally Posted by Jaco
Guys, one word and one type number:
SuperMicro X7DWA-N
Can hit 430FSB easily :P
Rock solid realibilty :fact: