Printable View
here it is, specs in sig, sorry for the bad pics (cell phone camera)
http://img145.imageshack.us/img145/6541/dsc002118vk.jpghttp://img252.imageshack.us/img252/2141/dsc002069ys.jpg
http://img252.imageshack.us/img252/983/dsc002098pa.jpghttp://img252.imageshack.us/img252/3739/dsc002108gf.jpg
Aldy402 what is that for orange fan you and many others use?
Shakermaker does you really need a passive "rad" AND a trippel?
its a cooler master uv reactive 120mm fan, i use it to cool the hot ballistix ramQuote:
Originally Posted by Hypno Toad
Well I've tried to get really good temps and so I ordered an Alphacool CORA 442 passive rad too. The temps are quite impressive now and thats what I wanted.
But I'm looking forward to replace my DDC+ with a D5.
Why? The DDC+ is the better pump... more head, less heat dump, quieter...
Alphacool has new Revision od the D5. So I'd like to test it.
So we will see which pump is the better one, but thanks for your advise.
Oh, the vario. Well, i guess itll be interesting to see what gives you the best temps, but even if they managed ti give it the same head as a DDC+ with top inlet, i dont see how they can solve the rather high heat dump.
I mean, if its like 5-6W higher than the old D5 itll be nearly as high as an Iwaki RD-30, and thats got 33ft head.
Keep us updated.
Shakermaker, adding another rad will decrease your performance.. your system is already insanely restrictive and adding more equipment to it wont help you.
btw, you ned to add ALOT of corrosion inhibitor to your loop if you havnt already done so. You have VERY large surfaces of aluminum and copper intermingling and it will end poorly if you dont prepare for it.
Thanks creidiki.
I'll check it out.
Radical_53 is a friend of mine and together we are going to test some pumps. After that we will have some nice results and based on that I will come to a conclusion.
@Darth Water
I use Water Wetter and I have no problems with corrosion. But thanks for your comment.
Maybe you could swap the passive rad for another active one... just a thought. That would also shorten your tubing which looks quite long here and there... maybe there's some room left for optimization.
Still I like the style, looks very clean with the matching silver components and such.
I agree. At least it looks cool! :)Quote:
Originally Posted by Radical_53
I suggest you just ADD another DDC+ instead of replace. You are seriously at the limit in terms of pumping power with all those hardware. Adding another one will push this pump or the D5 over its limits. You need TWO pumps to get good temps. Use Pentosin since ur mixing all kinds of metal.Quote:
Originally Posted by Shakermaker
finished rig...at least until i get my 165 i ordered from monarch the other day...
Looks very nice! :up:Quote:
Originally Posted by haste
This is my first attempt at water cooling. :toast:
http://img279.imageshack.us/img279/4...9medium5ws.jpg
http://img134.imageshack.us/img134/2...0medium8rt.jpg
http://img279.imageshack.us/img279/8...1medium9ib.jpg
http://img134.imageshack.us/img134/6...2medium9rv.jpg
http://img279.imageshack.us/img279/3...3medium7ds.jpg
http://img279.imageshack.us/img279/7...4medium9cf.jpg
http://img134.imageshack.us/img134/8...5medium6nr.jpg
http://img134.imageshack.us/img134/2...6medium2oe.jpg
Very nice setup there SIGfever, I have that same case, i think they look great :D
Damn :eek: thank god for Tygon, eh?
Here is my current setup, will update when Maze4 GPU top comes in from DD.
http://www.clandfa.clanservers.com/h2opic.JPG
This is my first post here @ XS :D
This was my old system, housed in an Yeong Yang 0420. I sold it when I was done with watercooling, then got back to air. Finally water started crawling up my sleeve again & I'm back on water haha!
http://www.xs4all.nl/~ramdinrs/System/System.jpg
This is my new system
http://www.xs4all.nl/~ramdinrs/System/Img_1626.jpg
gone post pics that i have at this momment ;)
setup running on a lan
http://i3.photobucket.com/albums/y90...eelding020.jpg
the full tower normal what it must be
http://i3.photobucket.com/albums/y90...r/DSC07309.jpg
bloks for my x1900xtx ready , but its in rma now ;)
http://i3.photobucket.com/albums/y90...r/IMG_0820.jpg
if u have something to ask shoot me :p
http://img107.imageshack.us/img107/698/img04536on.jpg
http://img107.imageshack.us/img107/8961/img04562cm.jpg
http://img107.imageshack.us/img107/1314/img04601ng.jpg
http://img46.imageshack.us/img46/8632/img04683wh.jpg
http://img46.imageshack.us/img46/2434/img04639gg.jpg
http://img46.imageshack.us/img46/6066/img04619rq.jpg
http://img46.imageshack.us/img46/1655/img04708nb.jpg
Little update here. :)
Changed to a Laing DDC, from a Eheim 1046 and removed the second hdd case.
http://213.202.211.105/gravedigga/pc.../ohneblitz.jpg
were's the friggin radiator?Quote:
Originally Posted by funkflix
Just a klick on my signature! :D
1 x Evo 240 and 1 x HTF3 Dual.
This is my machine...