I dont believe it is. B.c i tried ordering one this morning from them and it was at 260.00 then it went up to 280.00 a little bit later. so i doubt its a typo, its ridiculous is what it is .BTW ewiz has it for 214.00 plus shipping.
Printable View
I dont believe it is. B.c i tried ordering one this morning from them and it was at 260.00 then it went up to 280.00 a little bit later. so i doubt its a typo, its ridiculous is what it is .BTW ewiz has it for 214.00 plus shipping.
I don't think it's a typo. They went from $260 (or so) up to $290 earlier today. It went out of stock and now it's miraculously back in stock at $339. They've lost me as a customer! Ewiz.com operates within a few miles of ZZF and they're asking $214 for the same mobo. Supply and demand is one thing, but this is a stupid, greedy move on their part and they've lost at least one customer for life.Quote:
Originally Posted by Senater_Cache
Added to my cart and it says 339:nono: They must be on crack!Quote:
Originally Posted by Bryants97240sx
BTW got mine from ewiz also good price fast service:fact:
Thats BS, i called them this afternoon trying to order one and the guy told me that they were sold out.Now there instock at that price.
You guys might want to look at this:
http://www.xtremesystems.org/forums/...d.php?t=119767
hmm ok...ZZF can go to hell.
I used to have no problem but this is quite the insult, it is obvious that the customer does no longer come first with them.
Is eWIZ trustworthy? also, should I go with the AW9D-MAX or P5W-DH ?
i have a little problem with the ram....
400x8
strap 1066
ram 533 (1/1)
bios 1.3beta
manual timings 5-5-5-12 40 (like from detail)
the ram are normal Corsair TwinX2 2x512Mb PC6400 cas5...the default would to be 400mhz but to 400x8 ram 1/1 i succeed to install win, but crashes immediately under orthos blend test or occt...i try the orthos small FFTs and OCCT only on cpu with same settings and is ok but with the test only on the ram crashes immediately....i try raise the vdimm from 1.9 to 2.3V but doesn't change nothing :stick: .....some suggestions? :confused:
sorry for English
try vdimm 2.2v and 1.7mvch 8x401 if fail try 7x401Quote:
Originally Posted by shark2
Quote:
Originally Posted by Nettwerk
i also tried vdimm 2.3V and vmch 1.75V....400x6, 400x7, 400x8 with ram 1/1 doesn't work....now i set bus 321x9 and ram 4/5 to 400mhz and works fine under orthos blend and OCCT :confused: ....the problem is the synchronous with ram 1/1...i tried with 1.2 official bios and 1.3 beta but is the same :confused:
therefore....
- 4/5 divisor bus 321*9 and ram 400mhz 5-5-5-12 works fine
- 1/1 divisor bus 400*6,7,8 ram 400mhz 5-5-5-12 doesn't work
some possible solution?
thanks:)
He told you 401, not 400 ;)
Join the cant run 400fsb orthos blend clubQuote:
Originally Posted by shark2
heres mine at 401fsb but fails orthos blend only in 3 secs:
high vcore, 2v mch dont change squat
http://img225.imageshack.us/img225/775/sys2cu0.th.jpg
Quote:
Originally Posted by Chosen.
yes, i haven't said nothing because i tried also 401, 399, 396 and 390 and is the same in 1/1 :)
Quote:
Originally Posted by Nettwerk
yeah all in 3 seconds....but the problem is this damn synchronous, possible can't be resolved? :stick:
Waiting on better bios is getting old :)
im using the beta .13 bios and my e6600 does some crazy stuff:
set 8x400 and reboot this is what I get:
http://img177.imageshack.us/img177/7...whatdn7.th.jpg
set 7x400 and get this:
http://img246.imageshack.us/img246/9...whatzy0.th.jpg
Agreed. I have some nice muskin redlines that I can't run 1:1 over 419 because my board wont boot with anything higher. I just hope it's worth the wait or I will undercut ZZF and sell mine for only $335.00:)Quote:
Originally Posted by Nettwerk
Quote:
Originally Posted by Nettwerk
idem...after bus 360 shows that :)
try to rum memtest for windowsQuote:
Originally Posted by shark2
I'm having the same problem with may mobo, i tryed everything and as long i only can have my system stable with only 360 FSB, everything higher i have errors in memtest for windows, but i can run my memory FSB 267 and memory @ 400 3-3-3-8 2,25v and dont have any problems. When i raise de FSB with the memory 1:1 i cant pass 360 and i allredy give 2.0v to chipset.
I hope with a new bios the problem can be resolved :confused:
I only post to say that you aren't teh only one with problems :(
2.0vmch might be too much with the stock cooling, and especially for sub 400FSB. That might be the reason why you get errors... too hot NB.Quote:
Originally Posted by AlfaBoy
What FSB are you booting at?
Have you tried to go higher with uGuru?
any news or did someone find a fix for the power loss/uguru settings reset?
Quote:
Originally Posted by Nettwerk
yeah, over uguru happen that reset the entire bios when turn off the psu...the problem is the battery, from multimeter signs only 3.06/3.07V is discharge....change the battery and would have to resolve :D
-------------------------------------------------------------
to my ram settings i do same tests like the table:
http://img212.imageshack.us/img212/2944/tabrw0.jpg
the windows installation and memtest test5 are ok in both cases....therefore I can be quiet? :)
Already changed the battery :(
Guys,
Got a brandnew version of µGuru here, 3036. Feel free to test it if you like. Not sure if it'll fix the BIOS settings loss after powering down as I don't know the changelog yet.
Here's the download.
As always, use on your own risk!
Edit: Edited links to µGuru and the latest beta BIOS in post #1.
Thanks Sicness will try it out tonight
I increase the vmch from 1,5 up to 2.0 and have errors in memtest with FSB=370,380,381,400,401 i cried some combination of FSB, and vmch to.Quote:
Originally Posted by crotale
I can boot at 400 of FSB but windows is not stable i can't run SPI 2x32M.
I tried to OC using the uguru from bios and disable uguru in windows and only use uguru in windows and nothing cant pass 360 and run memtest or 2x32MSPI for example.
I don't no what to try, i think this is a problem with the abit or the bios.
I have WC in the cpu and in the VGA with 2x360 radiators and put one fan directly to NB and my temperature in IDLE are 33 and the computer have been up all day and night.
I have had this board and the x6800 for about a month 1/2 now...
Specs:
CPU: Intel Core 2 Xtreme x6800 - B2
BIOS: 1.3 BETA
RAM: (2x 1GB kit) Team Xtreem DDR2 800 3-3-3-8 @ 504MHz 4-4-3-4 2.35V
OC:
http://rodzilla.xtremesystems-dc.com...uo/cpuzcpu.JPGhttp://rodzilla.xtremesystems-dc.com...o/cpuzbios.JPG
http://rodzilla.xtremesystems-dc.com...uo/cpuzmem.JPGhttp://rodzilla.xtremesystems-dc.com...uo/cpuzspd.JPG
http://rodzilla.xtremesystems-dc.com.../duo/uguru.JPGhttp://rodzilla.xtremesystems-dc.com...duo/uguru2.JPG
This OC is 10000% stable and can run blended orthos indefinitely<-!
The issues that I’ve been having are when I try and change the multi to ANYTHING other than 11 (default). When I set the multi lower or higher the OC goes down hill FAST! I have to loosen the OC quite a bit to even get the PC to POST. When I set things in BIOS on a diff multi to setting that I know should post it just won't! (Like x10 - 360 FSB - 2:3) It either won't post at all or it will fail Orthos. On x11 the cpu will be stable at 3.8GHz and the RAM at 500MHz plus!
Similar things happen when I try and run the ram at anything other than 2:3...
But I'm very lucky in that x11 and 2:3 give me a very good 24/7/365 OC. Plus I am running very good timings on the RAM.
It just bugs me knowing that something is wrong. I think it's a problem with the Core 2 Xtream on the AW9D-MAX boards. (I have tried all of the BIOS that have been made so far)
Here is my CPU and RAM... if it helps.
http://rodzilla.xtremesystems-dc.com...duo/DUOCPU.jpghttp://rodzilla.xtremesystems-dc.com.../XtreemRAM.jpg
So far I LOVE this board! And I know the problems I'm having will be fixed in a new BIOS. So far 1.3 BETA offers no love for my x6800...