WELL.......NOW guess what THIS does....Warning 56K / photos...

Printable View

Show 100 post(s) from this thread on one page

09-24-2006, 08:44 AM
esdee

envy my personal Maximizer!

Thanks George :D
edit : as you can see from the full size image it has my name on it :D
http://img124.imageshack.us/img124/9...maxiin3.th.jpg
09-25-2006, 02:31 AM
Cranox

My friend got a Epox 9NDA3+ , is it compatible ?
09-27-2006, 11:54 AM
exhausted mule

i'm considering the purchase of a ddr-2 module.

curious what are the responses and experiences of those who have bought one and pushes some sticks with one.

chances are i'll still buy it however, i'd like to hear some experiences for comparison.
09-27-2006, 04:21 PM
GoriLLakoS

My sexy maximizer is here too..:D

Thanks George...:toast:

http://www.thelab.gr/attachment.php?s=&postid=445143

http://www.thelab.gr/attachment.php?s=&postid=445144
09-27-2006, 04:26 PM
Revv23

Sexy, where is mine? :D

Hehe got 2.75 running through my DDR2 right now but i just know i can get more mhz with a mzximizer...
09-27-2006, 04:28 PM
funkflix

I need one of this sexy beasts too! :toast:
09-27-2006, 04:45 PM
[XC] moddolicous

Quote:

Originally Posted by exhausted mule

i'm considering the purchase of a ddr-2 module.

curious what are the responses and experiences of those who have bought one and pushes some sticks with one.

chances are i'll still buy it however, i'd like to hear some experiences for comparison.

Kingpin has a thread in the xtreme OC section where he is putting 3.0v through his DDR2 with this and he has some pretty good results to show for it:
http://www.xtremesystems.org/forums/...d.php?t=115383
09-27-2006, 09:48 PM
hipro5

Quote:

Originally Posted by Cranox

My friend got a Epox 9NDA3+ , is it compatible ?

OFF Topic: THANK God (and FUGGER), I'm starting to receive e-mail notifications again...... :D

Now.....as for the Epox 9NDA3+ you're talking, we haven't test it yet so as to figure out if it is compatible....Do you have any pictures of it and espessialy around the Ram slots?....:)
09-27-2006, 09:50 PM
hipro5

Quote:

Originally Posted by exhausted mule

i'm considering the purchase of a ddr-2 module.

curious what are the responses and experiences of those who have bought one and pushes some sticks with one.

chances are i'll still buy it however, i'd like to hear some experiences for comparison.

There will be here soon I think....:)
09-27-2006, 09:56 PM
hipro5

BTW I JUST show our first review of it.....Though it is in French and I don't understand a word - except of the "electronical language" of it - I MUST admit that it's one of the most beautifull reviews I've ever seen......!....NOT because it's my "baby" reviewing BUT because of the "professionalism" these guys have......
Which company out there would deny to send them stuff for reviews?....I think NONE
....;) :)

Here's the link: http://www.cooling-masters.com./articles-40-0.html

.
09-28-2006, 01:09 AM
Tyrou

thanks a lot for the kind words hipro, your assistance in completing this review has been very helpful to me :)

by the way, I'm in the process of making the english version, so in a few days, you will be able to read everything ;)
09-28-2006, 02:30 AM
Cranox

Here are some pictures i found Hipro5 , if u need more/better pictures then i ask my m8 to take some.

http://cranox.com//Reviews/Epox9nda3...-9NDA3-big.jpg
http://cranox.com//Reviews/Epox9nda3...Ram%20area.jpg
09-28-2006, 02:44 AM
hipro5

Quote:

Originally Posted by Cranox

Here are some pictures i found Hipro5 , if u need more/better pictures then i ask my m8 to take some.

http://cranox.com//Reviews/Epox9nda3...-9NDA3-big.jpg
http://cranox.com//Reviews/Epox9nda3...Ram%20area.jpg

The easiest thing he can do is to remove/unsolder the coil I yellowcircled into photo OR lift it's one side up by unsoldering it and then plug the DDR PCB....... :)

http://www.thelab.gr/images/Hipro5/M...NDA3-small.jpg

In case he doesn't/can't unsolder it, he has to send us some measurments with a multimeter in some spots I could point out so as to see if it's OK or not.....:)
09-28-2006, 02:49 AM
hipro5

Quote:

Originally Posted by Tyrou

thanks a lot for the kind words hipro, your assistance in completing this review has been very helpful to me :)

by the way, I'm in the process of making the english version, so in a few days, you will be able to read everything ;)

I thank you Tyrou for the perfect review.....It's very well detailed and I kinda like it...:) :toast:

Looking forward to.....:)
09-28-2006, 04:08 AM
Rubiconx3

Wow isnt that thing nifty
09-28-2006, 02:04 PM
Cranox

Quote:

Originally Posted by hipro5

The easiest thing he can do is to remove/unsolder the coil I yellowcircled into photo OR lift it's one side up by unsoldering it and then plug the DDR PCB....... :)

http://www.thelab.gr/images/Hipro5/M...NDA3-small.jpg

In case he doesn't/can't unsolder it, he has to send us some measurments with a multimeter in some spots I could point out so as to see if it's OK or not.....:)

Aha , removing the coil is just to be on the safe side with the maximizer if i understand right. ( this is 100% safe ? )
What should happend if he unsolderd the coil and the maximizer is not plugged in ?
09-28-2006, 02:14 PM
hipro5

Quote:

Originally Posted by Cranox

Aha , removing the coil is just to be on the safe side with the maximizer if i understand right. ( this is 100% safe ? )
What should happend if he unsolderd the coil and the maximizer is not plugged in ?

Nothing.....Simple the motherboard will not post due to miss of the Vdimm.......You can't harm it in this way......and yes this way is 100% safe.....;)

EDIT: @ Tyrou > how the heck did you manage to take SO CLEAR shots of the whole Maxi?........What's the secret of it?.....How did you make a "white backround" behind everything/every part - EVEN at screws......?..... :D
09-28-2006, 02:23 PM
phelan1777

okay so I will be the typical ignorant consumer american for a minute and ask.

How much and where from?:D
09-28-2006, 02:39 PM
hipro5

Quote:

Originally Posted by phelan1777

okay so I will be the typical ignorant consumer american for a minute and ask.

How much and where from?:D

I think that very soon will be available in US too......;) :D
09-28-2006, 02:47 PM
phelan1777

Quote:

Originally Posted by hipro5

I think that very soon will be available in US too......;) :D

well if the price is reasonable / performance then I may get one, just to see what I can get for an OC out of it, but I am not Xtreme like most of the fanatics here, so just getting a stable decent OC would be fine with me. Though if this unit helps with stability then hell yeah I will get one.

Thank you for the work you have done and the device you have provided for the OC-ing community.
09-28-2006, 04:28 PM
wittekakker

Quote:

Originally Posted by Cranox

Aha , removing the coil is just to be on the safe side with the maximizer if i understand right. ( this is 100% safe ? )
What should happend if he unsolderd the coil and the maximizer is not plugged in ?

I think it has the same Power Circuit like our GeForce6600 cards for the contest. The coil is the only thing that is between the Vcore (GPU) and power mosfets. No coil, no voltage :) Removing it makes it safe to use the Maximizer because then no voltage can flow back to places we don't want it to flow to. Well, I guess so, right Hipro?
09-28-2006, 05:04 PM
punisher69

i read through the thread but i couldnt confirm a us/can price for your product hipro. i am wondering how much you are charging for your product.
09-28-2006, 05:16 PM
phelan1777

Quote:

Originally Posted by hipro5

I think that very soon will be available in US too......;) :D

PUNISHER /\
09-28-2006, 08:13 PM
hipro5

Quote:

Originally Posted by wittekakker

I think it has the same Power Circuit like our GeForce6600 cards for the contest. The coil is the only thing that is between the Vcore (GPU) and power mosfets. No coil, no voltage :) Removing it makes it safe to use the Maximizer because then no voltage can flow back to places we don't want it to flow to. Well, I guess so, right Hipro?

Right....;) :)
09-28-2006, 10:58 PM
SMa

hipro, when may we expect a delivery for Belgium?

Show 100 post(s) from this thread on one page