Printable View
Can't wait for the results, if it's good i'll buy it too :toast:Quote:
Originally posted by SmokeyTheBandit
Well i ordered an new chip :D:D
Athlon 64 3200+ Newcastle - AX - 0414 - XPMW :banana:
I hope this will finally let me break the 3 ghz stable barrier :D :P
This should go nicly on my new EPoX 8KDA3+ (nForce 3 250 GB).
Will let you guys know what its capable of :)
:toast:
Anyway, it's that NewCastle with 2.2Ghz & 512k chace?
A very short answer : YES :banana: :toast:Quote:
Originally posted by Primal
Can't wait for the results, if it's good i'll buy it too :toast:
Anyway, it's that NewCastle with 2.2Ghz & 512k chace?
Cool!Quote:
Originally posted by SmokeyTheBandit
A very short answer : YES :banana: :toast:
Already saw you updated your sig...
Yep im looking for vmods for the EPoX 8KDA3+ because i want to put them on before i put this motherboard + cpu under the prom :rolleyes:Quote:
Originally posted by Primal
Cool!
Already saw you updated your sig...
Why did you choose the EPoX upon GigaByte, Chaintech and more..?
Because this is the only one thats available here in holland besides the Chaintech.Quote:
Originally posted by Primal
Why did you choose the EPoX upon GigaByte, Chaintech and more..?
The Chaintech 250 preforms the same as his 150 brother , that is unacceptable offcourse (new chipset = beter preformace).
And the EPoX has 6 S-ATA controllers onboard wich i use so thats a must for me.
The other brands have not arrived here and will not arrive in a few weeks if you ask me.
I think that i will order my new Abit KV8 Pro tomorrow :p:
I'm gonna post some results in here when Abit has released the new BIOS ;)
Check this out:
http://www.anandtech.com/chipsets/showdoc.html?i=2063
Great review, I recommend it, very useful for people who wants to buy an A64+2nd mobo's at these days...
By the way, the Epox 8KDA3+ is the winner :banana:
It overclock the best, preforms extremely well and has a great variety of features. thought i'd go for the K8NS, but no... :rotf:
NF3250Gb rocks!
The Epox, oc's just as much as the Abit, 2480MHz... And the Abit has vcore up to 1.8v and vdimm 3.2 in ocguru, so i would pick the Abit, IF they soon release a new bios with agp/pci lock fix.
The MSI K8N Neo plat. looks nice too :) vcore op to 1.81v but only vdimm 2.85v
looks okay but nothing to change your excisting nf3 150 mobo over IMO :)
Well... I will change it with the Abit, but only if I know that there is'nt any problems with the agp/pci lock and multiplier-selection etc. :rolleyes:Quote:
Originally posted by bias_hjorth
looks okay but nothing to change your excisting nf3 150 mobo over IMO :)
If you read more carefully, you´ll se Abit have already fixed the agp/pci lock. All shipping boards will have working agp/pci lock.Quote:
Originally posted by K32A
The Epox, oc's just as much as the Abit, 2480MHz... And the Abit has vcore up to 1.8v and vdimm 3.2 in ocguru, so i would pick the Abit, IF they soon release a new bios with agp/pci lock fix.
The MSI K8N Neo plat. looks nice too :) vcore op to 1.81v but only vdimm 2.85v
Im acually going to give the K8V Pro a try tho its Via chipset.
Formann...
oops, my mistake.
But the Abit still have some probs. with the multiplier selection, and it also boots up with x9 multi on x10 cpu's... That what the test says
Agreed. My K8NPRO will do 350 FSB (Raid 0) and that`s good enough for me. Only thing missing is hardware firewall and I could care less.Quote:
Originally posted by bias_hjorth
looks okay but nothing to change your excisting nf3 150 mobo over IMO :)
1.8vcore with water, is that too much?
No it ain't. I have had 1.9V for several weeks now.Quote:
Originally posted by K32A
1.8vcore with water, is that too much?
Thx ;)
hello :banana:
Does core revsion AX (DH7-CG like 939) on sock 754 have a better overcloking results ?
does it have a probleme with 512 bh5 sticks and core Co ?
thanks
http://home.quicknet.nl/qn/prive/pjm...ifast43.81.JPGQuote:
Originally posted by damsxx
hello :banana:
Does core revsion AX (DH7-CG like 939) on sock 754 have a better overcloking results ?
does it have a probleme with 512 bh5 sticks and core Co ?
thanks
This is done with 2x 512 MB BH-5 Stix and a 3200+ NC AX Core ;)
So yeah its much better :D
Smokey, after I saw your OCing results I think i'm ready to buy 3200+ NewCastle! :banana: Awesome results man, congrats!
Oh and what's limiting you on the way to the 3Ghz club?
How much Vcore & Vdimm? & Dividers? Thanks...
i'll think i'll get NC 3200+/EP-8KDA3+/OCZ EB/X800Pro next week... :toast:
Heej im figuring out this mobo , its got some bios issues wich have to be solved before i can take full advantage of this awesome motherboard.Quote:
Originally posted by Primal
Smokey, after I saw your OCing results I think i'm ready to buy 3200+ NewCastle! :banana: Awesome results man, congrats!
Oh and what's limiting you on the way to the 3Ghz club?
How much Vcore & Vdimm? & Dividers? Thanks...
i'll think i'll get NC 3200+/EP-8KDA3+/OCZ EB/X800Pro next week... :toast:
An example is that it runs much much more stable with 2x 512 mb dimms in stead of 1 wich is very strange :stick: .
I cannot run 10x 290 + with 1x 512 MB dimm but only with 2.
Another example is the Dimm + Core voltages wich arent very stable with or without the Vcore or VDimm mod.
A new result :D ;)
http://home.quicknet.nl/qn/prive/pjm...ifast43.58.JPG
Vcore @1.9 V
Vdimm @ 3.32 V
This is done with my brand new Enermax 550 Watt PSU ( 36A @ 12V :toast: :slobber: )
Just got my 3200+ (0411) and a Chaintech nForce3 znf 250
I've got some Corsair pc4000 Xms, MachI and Zalman NB47J for the NB.
Rigth now it is stable at 2600mhz, but anything over that is unstabil.
What can I expect to hit whit a Vmod?
Btw Friday i will get a a64 3200+(caamc o344) anyone knows something about that stepping?
sorry for my english
caamc is a good old stepping.. I have a similar.. although 2600mhz seems a tad too low.. what vcore etc are ya running?... btw. those xms4000 really kills your performance..
bias_hjorth:
Vcore 1.7 max for my mobo, Vmod should do the work, what you mean when you say that xms4000 will kill my performance?
high latency and high mhz is not the best combination :)