SuperPi32m 5Ghz Ivy All Out Challenge!

Printable View

Show 100 post(s) from this thread on one page

11-10-2012, 02:59 PM
l0ud_sil3nc3

Quote:

Originally Posted by hiwa

http://www.xtremesystems.org/forums/...=1#post1630832

U find everything here .

small improvement with memory on LN2.

BBSE did not seem to scale with voltage like I thought it would, oh well:rolleyes:

http://i.imgur.com/XqUud.png
11-10-2012, 03:04 PM
hiwa

U still have cw problem dude, look your available memory. Try 7_10 under ln2 ans 7 tcwl
11-10-2012, 03:48 PM
l0ud_sil3nc3

Quote:

Originally Posted by hiwa

U still have cw problem dude, look your available memory. Try 7_10 under ln2 ans 7 tcwl

ha I must have forgotten to set maxmem on that run, I was testing 600+

7_10 at TCWL 7 was not working constantly failing by sometimes by loop 4 sometimes loop 23 at full pot.

http://i.imgur.com/k1yac.jpg

there's a Triple Point pot hidden somewhere under there:D

http://i.imgur.com/9cf6c.jpg

I tried voltage from 1.87 to 2.0v but stopped there as I was not seeing scaling, I will give PSC a try this Tuesday when I refill.
11-10-2012, 04:12 PM
Don_Dan

What's the humidity in your area?! :shocked:

PS: Looks like your MAXMEM was set to 600MB for that run, but your available real memory is too low.
11-10-2012, 04:17 PM
l0ud_sil3nc3

Quote:

Originally Posted by Don_Dan

What's the humidity in your area?! :shocked:

PS: Looks like your MAXMEM was set to 600MB for that run, but your available real memory is too low.

Humidity is pretty low, 35% in my house, but I have been benching for hours and hours on end, hence why so much frost.
11-10-2012, 04:26 PM
Don_Dan

I see. It looks pretty "cool" though... :D

Were you using ERAM for this run? And which CW size were you using? Instead of using ERAM you could try using two HDDs.
11-10-2012, 04:30 PM
l0ud_sil3nc3

Quote:

Originally Posted by Don_Dan

I see. It looks pretty "cool" though... :D

Were you using ERAM for this run? And which CW size were you using? Instead of using ERAM you could try using two HDDs.

Eram was used for this run, OCX SpiTweaker (656mb, 32, no CDT just c > x while ramdrive is on Z and spi resides here and is launched an ran from there.
11-12-2012, 09:06 AM
Splave

nice improvement man, time to put pitweaker to rest. I get better results just single copy paste of 1.8GB file, give it a shot man. Keep pushing
11-12-2012, 09:19 AM
Alex-Ro

Ssd make a diffrence regarding wazza versus classic hdd ;)
11-12-2012, 09:26 AM
l0ud_sil3nc3

Quote:

Originally Posted by Splave

nice improvement man, time to put pitweaker to rest. I get better results just single copy paste of 1.8GB file, give it a shot man. Keep pushing

Thanks Splave:)

Manual waza is definitely on the top of the list as my waza is not very efficient.

I have everything ready minus the LN2 hopefully they are not closed today and I will be shooting for 17's if I can fill back up tonight. Not sure if I should give PSC a spin cold or keep trying with BBSE.

Regardless this thread is awesome sauce and I will keep pushing:D
11-12-2012, 09:27 AM
l0ud_sil3nc3

Quote:

Originally Posted by Alex-Ro

Ssd make a diffrence regarding wazza versus classic hdd ;)

hmm not given this one a try, just on a 600GB Raptor over here.

Faster waza? Is that all? Or overall actual faster time?
11-12-2012, 09:31 AM
Alex-Ro

No,you can get a faster wazza with classic hdd,ssd is not the best for wazza.
11-12-2012, 12:01 PM
kintaro

Finaly today i run mems on ln2. cpu is on air.
you have to spent quite along time for test in order to get a decent run.
i have to improve it next time.

http://img708.imageshack.us/img708/2290/capture4ju.jpg

Uploaded with ImageShack.us
11-12-2012, 12:36 PM
kintaro

Quote:

Originally Posted by Splave

Splave - 6:17:515 - 49x102.1 - 1326MHz - 7-10-7-25-1 - ASROCK OC Formula - G.Skill PI 2300 2x2GB PSC - 1.96V - LN2/SS
http://i.imgur.com/2SizZ.jpg

Limit of cpu 1354 fails immediately even 8-12-8 XD my luck with 3770k is so garbage :down:...will try a new one tomorrow. Board is efficient as hell.

ASROCK OC Formula sets 49x102.1 as 5001.54
maximus v formula sets 49x102.1 as 5004.29:confused::mad:

http://img35.imageshack.us/img35/5039/capture7dh.jpg

Uploaded with ImageShack.us
11-12-2012, 01:24 PM
C-N

Amazing work with the 2800 CL11's & Cold Kintaro :up:
11-16-2012, 03:28 PM
hiwa

Kintaro i tried my good 2800 kit but best i did was 2666 c9 ss-20 with everything else tight, u got CRAZY hynix there they can do cl8 with those timings man.
I know dumo has some nice hynix to, hope he find time to try them under cold.

Got 296xx with PSC but i want fight with hynix and sammy lately.
11-16-2012, 09:54 PM
massman

Is that Hynix for real?
11-17-2012, 12:57 AM
kintaro

Quote:

Originally Posted by hiwa

Kintaro i tried my good 2800 kit but best i did was 2666 c9 ss-20 with everything else tight, u got CRAZY hynix there they can do cl8 with those timings man.
I know dumo has some nice hynix to, hope he find time to try them under cold.

Got 296xx with PSC but i want fight with hynix and sammy lately.

they have to be real cold in order to scale otherwise no magic.
it is hard due to increased risk of damage at deep freeze.
worth to try.
11-17-2012, 04:38 AM
l0ud_sil3nc3

Quote:

Originally Posted by kintaro

they have to be real cold in order to scale otherwise no magic.
it is hard due to increased risk of damage at deep freeze.
worth to try.

Interesting how cold are we talking about?

Also are these CFR/BFR/MFR?
11-17-2012, 04:55 AM
hiwa

Quote:

Originally Posted by l0ud_sil3nc3

Interesting how cold are we talking about?

Also are these CFR/BFR/MFR?

Hynix no have CB (AMD) but on IB a lot of times u get 55 code on boot when temp is lower than -100
should be some CFR
at -80000 no hynix can do like kintaro did with his kit, his kit should be very very special, i rememeber we tried at computex some nice hynix but CL8 with tight timing were IMPOSSIBLE
11-17-2012, 06:14 AM
Alex-Ro

His kit is BFR not CFR.Too bad we can't find those good BFR anymore :(
11-17-2012, 06:59 AM
hiwa

Quote:

Originally Posted by Alex-Ro

His kit is BFR not CFR.Too bad we can't find those good BFR anymore :(

TridentX 2800 BFR? u sure?

Kintaro care about sharing latest 5 digits on one of the ICs?
11-17-2012, 08:26 AM
kintaro

Quote:

Originally Posted by hiwa

TridentX 2800 BFR? u sure?

Kintaro care about sharing latest 5 digits on one of the ICs?

How important is the word waranty to you?
I pay for my hardware.
anyhow if you don't go down to -186 don't blame yours kit.
11-17-2012, 08:43 AM
hiwa

Quote:

Originally Posted by kintaro

How important is the word waranty to you?
I pay for my hardware.
anyhow if you don't go down to -186 don't blame yours kit.

very important, don't open them if they are not sample.
11-17-2012, 09:57 AM
Dumo

Possibly the first batch

http://img22.imageshack.us/img22/548...enshot093o.png

Neweeg's first retail batch (only 2X4GB)

http://img846.imageshack.us/img846/1...enshot092k.png

Show 100 post(s) from this thread on one page