Intel 4.5GHz & 5GHz LinX Stable Club

Printable View

Show 100 post(s) from this thread on one page

11-26-2010, 06:58 AM
OC Nub

WOW :shocked:, Nice chip SimpleTECH!!!
11-26-2010, 07:32 AM
Sniper

Nice chip SimpleTECH, what is your ambient temp ?
11-26-2010, 08:17 AM
CryptiK

Quote:

Originally Posted by andressergio

Well this is my first I7 920 a very nice and cool chip

can i join the club ? :D

cheers :toast:
Sergio

Nice one, passed with i7 now :toast:

Quote:

Originally Posted by SimpleTECH

SimpleTECH | Xeon W3520 [4C 8T] @ 4619.7MHz | 1.440 | Gigabyte X58A-UD5 | Water | 3845A935

http://img696.imageshack.us/img696/9...201440vf7d.jpg

Even with two quads, this chip still runs hot. Need to get some extreme cooling or wait for it to get colder in my basement.

That hot with 2 quads huh, toasty chip. Did the second rad help much?

Mines at the limits of a single quad & EK HF at 4.5GHz on a cold night, temps approach 90*C at ambients around 20*C.
11-26-2010, 08:19 AM
Presretach

SimpleTECH,
that you can write settings for 220 BCLK for UD5?
11-26-2010, 08:45 AM
Sniper

Quote:

Originally Posted by CryptiK

Mines at the limits of a single quad & EK HF at 4.5GHz on a cold night, temps approach 90*C at ambients around 20*C.

That was high, with 2x 360 rads and fairly quiet fans I can do 4620 HT with temps between in mid 70's.
11-26-2010, 08:53 AM
zalbard

Quote:

Originally Posted by CryptiK

That hot with 2 quads huh, toasty chip.

Probably bad IHS contact, a lot of i7 chips have that. :(
11-26-2010, 09:09 AM
deachus

deachus ~ 920 D0 @ 4523MHz ~ vcore 1.393 ~ vQPI 1.425 ~ CPU PLL 1.457 ~ REXIII ~ 3913A330 ~ Water

http://i580.photobucket.com/albums/s...-1T_20pass.jpg
11-26-2010, 09:11 AM
SimpleTECH

Quote:

Originally Posted by OC Nub

WOW :shocked:, Nice chip SimpleTECH!!!

Thanks!

Quote:

Originally Posted by Sniper

Nice chip SimpleTECH, what is your ambient temp ?

About 68°F (20°C)

Quote:

Originally Posted by CryptiK

That hot with 2 quads huh, toasty chip. Did the second rad help much?

Mines at the limits of a single quad & EK HF at 4.5GHz on a cold night, temps approach 90*C at ambients around 20*C.

Probably an uneven IHS.

Quote:

Originally Posted by Presretach

SimpleTECH,
that you can write settings for 220 BCLK for UD5?

Certainly, give me a sec.

Quote:

Originally Posted by Sniper

That was high, with 2x 360 rads and fairly quiet fans I can do 4620 HT with temps between in mid 70's.

Quote:

Originally Posted by zalbard

Probably bad IHS contact, a lot of i7 chips have that. :(

Yup. :(
11-26-2010, 10:13 AM
Sniper

I lapped my 3845A935 and it helped a bit. Dont have the numbers anymore, but I think it was 5-6 degrees with a TRUE.
11-26-2010, 10:15 AM
andressergio

Great results all ppl :up:

Thanks Cryptik :up:
11-26-2010, 10:54 AM
SimpleTECH

Quote:

Originally Posted by Presretach

SimpleTECH,
that you can write settings for 220 BCLK for UD5?

I know there are a few templates lying around but I felt kind of lazy so I took some pictures instead.

Hope this helps. :buddies:

http://img844.imageshack.us/img844/3...030453u.th.jpg http://img708.imageshack.us/img708/4...30448zy.th.jpg http://img151.imageshack.us/img151/1...030449t.th.jpg http://img42.imageshack.us/img42/4779/p1030450o.th.jpg http://img152.imageshack.us/img152/2985/p1030451.th.jpg http://img100.imageshack.us/img100/7...030452c.th.jpg
11-26-2010, 11:06 AM
Sniper

Have you tried to lower CPU pll voltage SimpleTECH? It should allow you to also lower vcore and temps a bit. I use 1.5v on mine.
11-26-2010, 11:09 AM
Gorki

Quote:

Originally Posted by SimpleTECH

I know there are a few templates lying around but I felt kind of lazy so I took some pictures instead.

Hope this helps. :buddies:

:up: Thanks.

Nice one! :)
11-26-2010, 03:28 PM
vodka3dg

tried today.... even putting my rig directly below the AC unit wasn't enough to manage ambient temps lower than 26ºc :(

summer seems to be hitting hard this time... will try again another time, cause temps where getting higher thant 86ºC....
11-26-2010, 04:14 PM
Presretach

@SimpleTECH
Thanks.
11-26-2010, 04:43 PM
tompc3

Hi Guys
fooled around for a little while this afternoon and here are my numbers all air cooling
Classified 3 mobo, 980x batch #3032A340

http://i188.photobucket.com/albums/z...l/980x4511.png
11-26-2010, 06:54 PM
andressergio

Quote:

Originally Posted by vodka3dg

tried today.... even putting my rig directly below the AC unit wasn't enough to manage ambient temps lower than 26ºc :(

summer seems to be hitting hard this time... will try again another time, cause temps where getting higher thant 86ºC....

will be hard mate at those temps your batch is way hotter than mine

better wait for cooler ambients to try

best of lucks
Sergio
11-27-2010, 01:08 AM
SimpleTECH

Quote:

Originally Posted by Sniper

Have you tried to lower CPU pll voltage SimpleTECH? It should allow you to also lower vcore and temps a bit. I use 1.5v on mine.

I tried but 1.800v was the lowest. :(

I'll try tweaking a bit later.

I left my window open during the night and saw a 4°C drop in temperatures.

http://img10.imageshack.us/img10/992...56vf7d2.th.jpg

Bring on the colder weather!
11-27-2010, 07:04 AM
donmarkoni

Do I get a cookie for lowest MHz 100GFLOPS run? :D

donmarkoni | i7 980X [6C 6T] @ 4560MHz | 1.425 | Rampage III Extreme | Water (ambient 26°C) | 3013A472

http://valid.canardpc.com/cache/banner/1505382.png

http://img130.imageshack.us/img130/2...6ghz100gf0.jpg
11-27-2010, 07:31 AM
Church

donmarkoni: 36V core voltage? :eleph:
11-27-2010, 07:56 AM
DomagojX

@churcy:

Quote:

Originally Posted by donmarkoni

i7 980X [6C 6T] @ 4560MHz[/URL] | 1.425 | Rampage III Extreme | Water

It's a bug
11-27-2010, 08:04 AM
donmarkoni

It can handle up to 60V

http://img80.imageshack.us/img80/667...own980x57v.jpg

j/k :rofl:
as domagojx said, it is a bug, but funny one. :)
11-27-2010, 12:56 PM
Shiranui Gen-An

Shiranui Gen-An | i7 980x [6C-6T]@4511MHz Batch #3005F803T | 1.435v | EVGA E762 4-Way Classified | Air (Venomous X+2x Scythe Ultra Kaze 2000RPM)

Looks like what they say about F-batches needing more volts is true. I couldn't do it with HT enabled in my limited testing, would probably take 1.45v+ which isn't really safe on air methinks.

http://img254.imageshack.us/img254/9...bclklinxs0.jpg
11-27-2010, 02:39 PM
nickless

Second try with HT off
Xeon W3520:
4C 4T
batch# - 3845A935@4651MHz
mobo - RIIIE
cooling - water: EK-Supreme HF, MCP355, Magicool Xtreme III
vcore @ 1.422V
Room T - +18*C
during test http://img825.imageshack.us/img825/8135/linx4650.th.jpg and after http://img139.imageshack.us/img139/2...ios0011.th.jpg
11-27-2010, 05:34 PM
donmarkoni

Here is another one, but this time with HT enabled. ;)

donmarkoni | i7 980X [6C 12T] @ 4522.6MHz | 1.4375 | Rampage III Extreme | Water (ambient 11°C) | 3013A472

I forgot to do a CPU-Z validation, but I hope it doesn't matter.

EDIT: For those wondering about temps, it is on water, but with open windows and ambient dropped by 15 degrees compared to previous run.

http://img140.imageshack.us/img140/8...x45ghzlinx.jpg

Show 100 post(s) from this thread on one page