lol dumo whats with the devil ram clocks 666mhz 666 timings
Printable View
lol dumo whats with the devil ram clocks 666mhz 666 timings
Wow, VERY impressive memory frequency, especially combined with a NB frequency of 3G. What voltages are you using + would it be possible to run a 1M on those settings ... I'm pretty sure you'd be the most efficient on my list :cool:Quote:
Originally Posted by Dumo
negative, this would be much more efficient.Quote:
Originally Posted by massman
http://www.xtremesystems.org/forums/...6&postcount=51
I'm pretty sure it won't ;-)Quote:
Originally Posted by KELL5
seems like my sata corrupted lol...Where is my old pata drive:confused:
Phenom II 975 3.3Ghz with ddr3 probly look like this...
http://img26.imageshack.us/img26/7214/ddr3amf7.jpg
http://img13.imageshack.us/img13/971...shot104ny5.jpg
http://img266.imageshack.us/img266/1...shot102gx9.jpg
@ Massman.. How to calculate pi efficiency? I just run with those "real time and kill explorer" things. I never pay attention on those maxmem and other ostweaks.
Should learn it long time ago:)
Thanks.
Been a long time bazx:)Quote:
Originally Posted by bazx
I need to brush off the curse of nforce 680i mobo:D
I have a question about NB Voltage. So far I haven't touched NB voltage but as soon as I reached around 2100mhz I get unstable during stability testings.
I am now working 265 x 1 = 3710mhz(1.52v) with HT/NB multiplier at x7 (1855mhz) which seems stable so far. I am using the system in sign, and how much can i put on the NB/HT voltage for a 24/7 clock?
now that's efficient :clap:Quote:
Originally Posted by Oliverda
It's pretty simple, actually: time x frequency = efficiency (lower = better)Quote:
Originally Posted by Dumo
You're at 68.5k, not bad, but I had expected a lot better, actually :confused:
I can run OCCT for an hour at 3.8ghz but I randomly BSOD in windows with 0 CPU load. Awesome! And setting 1.575v BIOS (previously 1.55) results in 1.475v in windows. Great!
I have CACVC AC 0849APMW and its running stable @ 3.7GHz / 1.45v
havent tried prime yet but i benched several hours with diffrent 3d marks wo errors.
CPU: AMD Phenom II X4 940 @ 3.7GHz / 1.45v
MBD: Gigabyte GA-MA790GP-DS4H
RAM: 2 x 2GB A-Data Over Clock Extreme 1066+ @ def
GFX: Gigabyte Radeon HD4850 1GB @ 789/1104
3D Mark 2003 score 48592
http://img197.imagevenue.com/loc1153...122_1153lo.jpg
havent tried lower vcore or higher MHz yet:)
Op sys is Vista x64
CPU Model Used - Phenom II 940 BE
CPU Full Stepping - CACVC AC 0850BPAW
CPU Frequency - 3800mhz
CPU Vcore - 1.45v
NB Frequency - 2000mhz
HT Link Frequency - 1800mhz
Memory Frequency - 533mhz
Memory Configuration - 2x2gb
Memory Ganged/Unganged - unganged
Mainboard Model - DFI LP UT 790FX-M2R
Cooling Type - Water
Windows Version and x86 or x64 - Vista x64
http://i22.photobucket.com/albums/b3...s/4hrprime.jpg
well i hoped to get an overclock lol, cacvc-ac0b50epmw 940 chip, on a dfi dk 790fx-m2rs bios the newest non beta (10/2008),
first thing i need help with is if i add "special vid add" the system gets very unstable. the computer will boot to the bios at a 22x200 just wont go into any windows nor does it at anything above 15.5x200, i have tried upping the bus insted of the multi no luck.
what am i missing? oh the ram im running is 8gb corsair dominator 1066(testing done with 4gb tho), 850w corsair psu. thanks in advance so far my best o/c is 3.1ghz got into windows once at 3.6ghz..
anyone have luck with the 1/16/09 bios? any issues? worth a try?
This is nice!Quote:
Originally Posted by Kingsfan
My chip on AIR will crash @3815/1.45V after 20-30 minutes of OCCT.
I will try 3800MHz then ;)
Hi
I'm Stephen, known as Steevo, obviously. Have been watching this thread for awhile, I hail from TechpowerUP! where our lord W1zzard and Dan flog and beat us. Anyway, on with the show.
System Specs:
M3A32-MVP Deluxe 1406 BIOS
Phenom 940 II @ 1.56 vcore BIOS (before vdroop)
OCZ Reaper RAM 5.5.5.15 2T stable to 1160
Swiftec 655 pump/Apooge GT CPU block/MCW60-R GPU block/ 360mm radiator. All 1/2 ID tubing, custom coolant.
4850HD Sapphire 1Gb pencil modded 740Core 1148mem
750Gb Seagate
Generic DVD burner
Rosewill cheap case, heavily modded.
750W PC Power and Cooling, modded. And again thanks to the guys at PC Power and Cooling, my PSU died a day after getting it back from Mark, and even modded, disassembled, they still repaired it under warranty.
Vista X64
Onboard sound
BenQ 22" 1680X1050 widescreen LCD
Saitek KB/ Logitech MX518 Mouse
Logitech 5.1 surround
Build Log, I had it custome modded by a great guy named Mark. http://forums.techpowerup.com/showth...=74303&page=11
Stepping: CACVC AC 0849EPAW I have booted to Vista at just under 4Ghz, and stable at 3.88 as the highest I have gone without extreme volts. This board has a large vdroop and thus I am slightly limited in what I can do without a hardware mod. I run F@H SMP, and GPU 24/7 stable now at 3.81 and I going to start pushing it back up every day untill it wither bombs out witha BSOD, or the F@H SMP clinet freaks. The USB controller doesn't like to be set at "Full speed" in the BIOS, it must be set at "High Speed" or else you get USBOHCI BSOD at the worst times.
Vantage Run http://service.futuremark.com/compare?3dmv=722589
CPU-Z validation http://valid.canardpc.com/show_oc.php?id=497859 (I dropped it as I was having issues, but believe I have them sorted now)
Pre and post 940 benchmark of GTA4 same gfx card drivers.
Statistics
Average FPS: 42.74
Duration: 37.55 sec
CPU Usage: 56%
System memory usage: 64%
Video memory usage: 75%
Graphics Settings
Video Mode: 1680 x 1050 (60 Hz)
Texture Quality: High
Render Quality: Very High
View Distance: 40
Detail Distance: 100
Hardware
Microsoft® Windows Vista" Ultimate
Service Pack 1
Video Adapter: ATI Radeon HD 4800 Series
Video Driver version: 7.14.10.630
Audio Adapter: Speakers (SoundMAX Integrated Digital HD Audio)
AMD Phenom(tm) II X4 940 Processor
File ID: benchmark.cli
GTA 4 with 8.12 drivers on both these.
Statistics
Average FPS: 39.14
Duration: 37.45 sec
CPU Usage: 62%
System memory usage: 74%
Video memory usage: 76%
Graphics Settings
Video Mode: 1680 x 1050 (60 Hz)
Texture Quality: High
Render Quality: Highest
View Distance: 38
Detail Distance: 100
Hardware
Microsoft® Windows Vista" Ultimate
Service Pack 1
Video Adapter: ATI Radeon HD 4800 Series
Video Driver version: 7.14.10.630
Audio Adapter: Speakers (SoundMAX Integrated Digital HD Audio)
AMD Phenom(tm) 9850 Quad-Core Processor
File ID: benchmark.cli
Thats quite some introduction, and welcome to the forums :welcome:Quote:
Originally Posted by Steevo
Welcome to XS Steevo:toast:
Nice run there.
Keep pushin with Win7..
http://img18.imageshack.us/img18/8056/45720998pq5.jpg
Anyone ever tried 1T on this platform? Don't know if it's even possible.
My new high for SuperPi on AIR ;)
Attachment 94404
:rolleyes: Ambient ~ +6C, vCore is reported correctly and vIMC was 1.32V.
HWBot top AIR for now ...
http://www.hwbot.org/signature.img?iid=190624
New personal high for CPU-Z screen (1.638V/AIR)
http://img4.imageshack.us/img4/7161/cpuz4408mhzsn5.png
what cpu cooler do you have?1.63volts on air?
Thats not nice....:rolleyes: , i think i will need to move my stuff again soon. Gratz to top1 super pi1m PII940 on air time! :clap: :clap:Quote:
Originally Posted by Lightman
I have tryed to get higher clocks on 3Dmark2006 and 24/7 and more stability....i have going up about 100mhz more than before(when i did 4260mhz super pi1m) in 3dMark2006 and all my cores can now do super pi1m @ 4.0ghz+ with 1.47v easy with indoor temp 26c and True Black with two slow 12cm fans....waiting for my Ultra Kaze 3000rpm fan to arrive.
What core temp do you have idle @ 4295mhz?
TT True 120 Ultra + 12cm FANQuote:
Originally Posted by gsk3rd
I'm not sure, at 3400MHz it was 24C, haven't checked them @4295MHzQuote:
Originally Posted by Lastviking
BTW you seems to have better cores than mine :)
I can do max 4.2GHz on 4 cores, maybe 4.3GHz with cold air
3DMark06 is stable up to 4.07GHz all cores (so far max. tested, could be more), 3DMark 2001 4 cores are good up to 4.15GHz!
PS. You were enjoying top AIR spot for a loong time :p: If you beat me now then my only hope would be new BIOS from Gigabyte with NB vcore or a new CPU :D
Is there an AMD Pi toplist? Can't find anything:confused:Quote:
Originally Posted by Lightman
HMmh, i don't know :shrug:Quote:
Originally Posted by Lastviking
I didn't have HWmonitor so i didn'y know the temps but i was putisde and there was about -5c :up:
Vcore..hmmh..~1.6v, i think..Can't remember :(
And i just fast tryit max clock, when Asus mobo comes i will do better scores and when i have time, right now i have to study for exams so next Saturday i think i will do some tests with Asus :cool: