u can do betterQuote:
Originally posted by Learn
hi
new cooling :D
is7-e vddr/vtt/vdd modded 2.8c m0
http://learn.chez.tiscali.fr/pifast-sub-50-2-8CM0.png
;)
nice bug of cpu-z
287 1:1... u r in asynch mode
Printable View
u can do betterQuote:
Originally posted by Learn
hi
new cooling :D
is7-e vddr/vtt/vdd modded 2.8c m0
http://learn.chez.tiscali.fr/pifast-sub-50-2-8CM0.png
;)
nice bug of cpu-z
287 1:1... u r in asynch mode
with a better mobo, probably.......yesQuote:
Originally posted by cpulloverclock
u can do better
;)
nice bug of cpu-z
287 1:1... u r in asynch mode
it's a clockgen and cpuz bug, with the n/b strap @ 667
53.09 on my locked barton.
ill up the shot later. i have only 53.31 shot at the sec
http://www.zone.ee/tomz/data/rekordid/pifast.jpg?2
:)
Shido, :p:
Here's my newest one........Pentium4 3.4GHz at 1:1 CPU(fsb) : RAM....RAM= 2 x 256MB Kingston Value Ram PC2700(DDR333)(BH-6 chips onboard) at 269.4MHz(539MHz DDR) with Cas 2-5-2-2 Streat Racer - Enhanced - 4 - Enable - Enable ,on an ABIT IC7 Mobo...
Still climbimg the charts...
It took me a Vmod to do it. :)
A small update:D
At 262 mhz with Cas 2-5-2-2 Streat Racer - Enhanced - 4 - Enable - Enable ,on an ABIT IC7 Mobo...3.2c and promie r404.
Root i am coming for you...few days left to have 3.4:D :D
Nice Job man:toast:
Nice Hipro5Quote:
Originally posted by hipro5
Here's my newest one........Pentium4 3.4GHz at 1:1 CPU(fsb) : RAM....RAM= 2 x 256MB Kingston Value Ram PC2700(DDR333)(BH-6 chips onboard) at 269.4MHz(539MHz DDR) with Cas 2-5-2-2 Streat Racer - Enhanced - 4 - Enable - Enable ,on an ABIT IC7 Mobo...
The best I ever did on the IC7 was 43.13 and that was more than 100 Mhz higher:rolleyes:
You'r close to Maccis "Nitrogen limit" at 42.78
What is your Ram-Volt at that speed.:toast:
BtW:
Now I have been on top of the Pifast for 3 month:D
Tom....... 16.12.02 til 6.1.03 ca 4 weeks
JCViggen....... 6.1 til 8.3 ca 9 weeks
Capid.......... 8.3 til 24.4 ca 7 weeks
JCviggen......... 24.4 til 7.5 ca 2 weeks
Macci.......... 7.5 til 31.5 ca 3 weeks
Tom......... 31.5 til 10.6 ca 1 weeks
Hipro5............ 10.6 til 12.7 ca 5 weeks
Tom........... 12.7 til 10.9 ca 9 weeks
Macci........... 10.9 til 16.10 ca 5 weeks
JCViggen............ 16.10 til 6.12 ca 7 weeks
Tom.......... 6.12 til ?? WR 3 month
Hey Tom
Amazing time you've held that record so far, when does youre new cascade arrive?
Thx
Stefan
in week 13 M8:toast:Quote:
Originally posted by Pejsen
Hey Tom
Amazing time you've held that record so far, when does youre new cascade arrive?
Thx
Stefan
Change to AMD64:eek: !!
Vmods, don't you just love em?
omg.. my Mobile is right up there with P4EE's and A64 3400+ :D 27th place now.. Not bad for 80 euro chip and 100 euro board. :P
What about your €800,- cooling? :DQuote:
Originally posted by Fewture
omg.. my Mobile is right up there with P4EE's and A64 3400+ :D 27th place now.. Not bad for 80 euro chip and 100 euro board. :P
lol zeus
here a another try with my 3000+
http://kakaroto.ntonline.nl/A64_3000/Pifast_2.62GHz.PNG
With water.... This CPU has little problems with 2600MHz....not a good cpu or the cooling?
great CPU indeed.. Cooling is the problem in your case but nice water job anyway :)
Thanks Tom my friend....... :toast:Quote:
Originally posted by Tom Holck
Nice Hipro5
The best I ever did on the IC7 was 43.13 and that was more than 100 Mhz higher:rolleyes:
You'r close to Maccis "Nitrogen limit" at 42.78
What is your Ram-Volt at that speed.:toast:
BtW:
Now I have been on top of the Pifast for 3 month:D
Tom....... 16.12.02 til 6.1.03 ca 4 weeks
JCViggen....... 6.1 til 8.3 ca 9 weeks
Capid.......... 8.3 til 24.4 ca 7 weeks
JCviggen......... 24.4 til 7.5 ca 2 weeks
Macci.......... 7.5 til 31.5 ca 3 weeks
Tom......... 31.5 til 10.6 ca 1 weeks
Hipro5............ 10.6 til 12.7 ca 5 weeks
Tom........... 12.7 til 10.9 ca 9 weeks
Macci........... 10.9 til 16.10 ca 5 weeks
JCViggen............ 16.10 til 6.12 ca 7 weeks
Tom.......... 6.12 til ?? WR 3 month
The Vmem is 3.55Volts.......
A question.......IF I had a Pentium4 3.4GHz EE , what whould be my score then at the same speed???
did a pifast run myself today:
http://www.voidyourwarranty.nl/image...tc/48.97rs.jpg
http://www.voidyourwarranty.nl/image...tc/48.97rs.jpg
48.97s :)
Athlon64 3200+ @ 2521mhz @ 1.75v (CPU-z reports the vcore wrong)
Gigabyte GA-K8NNXP @ 280mhz
Kingston HyperX BH-5 @ DDR460
I get 44sec with my rig....
But in the future it will be lower (i am preparing my ram kingston with bh-5)
You have 44 sec pi fast with this setup?Quote:
Originally posted by overclockerr
I get 44sec with my rig....
But in the future it will be lower (i am preparing my ram kingston with bh-5)
You mean super pi ?
Once my boards hot flashed ill get into the comps :)
Edit: BTW what is pifast heavily based on?
Quote:
Originally posted by hipro5
Thanks Tom my friend....... :toast:
The Vmem is 3.55Volts.......
A question.......IF I had a Pentium4 3.4GHz EE , what whould be my score then at the same speed???
If you look at FUGGER on 13. place going 43.50 with P4@EE 4496 multi set at 16 compaired to bioblade on 18. place going 45.33 with 3.2@4470 multi 16.
Difference is 1.83 sek. Then if you had a 3.4EE you will go about 41.2 sek:cool: +- 0.1 sek
:toast:
44.5s at 4400MHz
43.7 at 4500MHz
43.5 at 4521MHz
then, I'm waiting for a FX-55 :) :D