thanks will test.. what improvements are there?Quote:
Originally Posted by stasio
Printable View
thanks will test.. what improvements are there?Quote:
Originally Posted by stasio
I'm always happy when you post.Quote:
Originally Posted by stasio
I know this UD5 is a Solid board, more than any other. I was just missing some better ram overclock for my elpidas and better NB overclock as seen on crosshair IV. I think that's much a matter of bios improovement.
I will definately go for Gigabyte w/ bulldozer if this bios is the one I'm looking for.
-Solves SMART Command Fail with OCZ Sandforce FW 1.11 and RAID ROM updated to 8.9.1.1002.Quote:
Originally Posted by Tomasis
Hey. I have had this board for a while. Before I hay my disks set up in a software RAID5 array, now I have them in a hardware array, and when I try to copy large amounts of data over, i get a BSOD. Yeah I have my computer OC'd but i have not had it blue screen with my other uses (watching videos, WCG, light gaming, etc) It's only been recently that I've been having this problem. On the BSOD, it flashes something about ntfs quick before rebooting. Anybody have any ideas?
UPDATE: It looks like it's something with the external and USB possibly. I tried copying something over to the local drive and it crashed again... I'll keep digging around a little.
SOLVED: It looks like the chipset drivers from Giga conflict with the USB drivers that W7 installs. I uninstalled all of the usb ports and rebooted and it worked fine.
i got 1075T and this is my best till now, will try more but i think this is max fsb i can get from my mobo, cooled with air
http://www.shrani.si/f/y/iA/1FnzRkzF/record.jpg
Only 280's? That's a shame. I've got a board that I just set the HT. to and it booted completely stable at 305. It can definitely go farther. Have you tried increasing the NB (chipset) voltage?
does anyone know what is set fsb clock generator for this mobo
I have a picture of the PLL, but it's not in the SetFSB list.
http://i302.photobucket.com/albums/n...3/DSCN1157.jpg
i managed to push it just over 4.4GHz :P
http://www.shrani.si/f/35/6M/2q7Z4LXY/44.jpg
Does anyone happen to know if this motherboard is gonna support the upcoming bulldozer CPUs?
Probably not, unless Gigabyte decides to update BIOS as ASUS and MSI do. Gigabyte has already made/announced AM3+ ready motherboards (revisions/new versions of 8x0 chipset boards with black AM3+ socket).
It will, but probably later.
F8K that is supposed to be good here is weird, sometimes it's stable, and sometimes not. Some weird popping cranckling noise coming from Forte 7.1 + 6870 crossfire...
F8M has worse OC abilities but seems very stable, PhenomMsrTweaker , don't work in F8M also....
Do the latest beta Bios improve the support of 1.5V memories? I'm running F8c and it seems that it can't set the voltage below 1.6v.
I would check my bios for mem voltage range if i could. My keyboard stopped working at post ? I cant even set my hd to sata mode without the bios hanging. I was planing on a new amd board for bulldozer. I'm glad i waited .
I am running F8n and it still has a minimum for ram voltage at 1.6v. Though my board recognizes that the ram is 1.5...Quote:
Originally Posted by BrowncoatGR
IIRC it is due to hardware limitations, so cant be changed with bios update.Quote:
Originally Posted by desnudopenguino
I figured that it is a hardware limitation of the board, or the components thereon... usually those things are.Quote:
Originally Posted by wez
Quote:
Originally Posted by desnudopenguino
Thanks guys. I guess i'll have to deal with the issue until i upgrade.Quote:
Originally Posted by wez