Just updated mine, and i saw a few more options to do with ram. temps seem better too.
Printable View
Just updated mine, and i saw a few more options to do with ram. temps seem better too.
Does Bios 0602 expand the 'tRFC' memory setting past 42.Quote:
Originally Posted by Milamber_au
WZ, if im reading into the "GTL" volt setting correctly, its supposed to be approx 2/3 of whatever cpu volts your running??? I guess the same would apply to northbridge GTL also??? :confused:
Users that flashed to BIOS 0602, would you be kind enought to tell me if your temps are reading normaly? Ever since BIOS 0502/0601, my CPU temps are reported as 10C lower and NB temps, 20C lower...
Its the same man as 0502/0601.Quote:
Originally Posted by VinnyG
Darn... I was hoping this would be solved, its the only real issue I have with the BIOS right now:P
anyone passed 500fsb with their p5e with e8400 on air?
can you please post your voltage, cuz mine doesn't seem to like it, or i'm not giving it enought juice idk
thanks
btw vinny, it's weird you seem the only having temps problems with the lastest bios
haven't really taken them beyond 1066mhz... no point for me.. im just finally happy i got 533 5gb without issues.Quote:
Originally Posted by MMaster23
bottom line is 4 of these work. I actually recieved a set of 4x1 dominator before the current one, where one stick was bad... i was VERY close to just sending all the :banana::banana::banana::banana: back and run my 2x2gb 800mhz xms2 ram... but that add to shopping cart button and the "-23%" pricetag on the 2x1gb dominators from another site just made me do it.
thank god it was only the stick. I got my money back from the one firm and got the ram somewhere else, and now it finally works.
Also would be interesting to know which slots are populated when ppl are testing vDIMM.Quote:
Originally Posted by karl_eller
I had slots 2 and 4 filled (the 2 black ones).
yes, and it adds a whole lot of settings for tRFCQuote:
Originally Posted by doakh
the only thing, i noticed so far
Yet another thing I'll have to play around with. I wonder if RAM usage/activity would also have an impact on the volt readings...Quote:
Originally Posted by necron66
Looks like when my G.Skill kit gets here, I'll have some experimentin' to do! :D
Eller
Wierd things going on.
I just bumped FSB to 450 and set RAM 1:1 and start stress testing and my CPU temp jumped up to 90c:shocked: (Everest and AISuite). Both cores were at 52c. OK, so I boot to Bios and check CPU temp, 38c. Boot back to windows and CPU temp reads 27c, both core are 35c. I let it idle while I read about the 602 bios ;) and I hear my CPU fan spin down. Checked Speedfan and sure enough, running 50% (Q-Control disabled) and CPU temp back to 79c (cores still at 34c/35c). After a couple of minutes the fan went back to 100%, but the CPU is still at 79c as I type this. I'm still on Bios 501 that I flashed when I built the system and have not seen this behavior at any FSB (up to 515).:shrug:
Another change with the 602 bios:
601 Bios: Vcore on Auto with E8400 reads a too high 1.360v in bios
602 Bios: Vcore on Auto with E8400 reads about 1.185v (forgot to note exact voltage)
I have my Vcore manually set to 1.24375v with an E8400 @ 3.6Ghz. Bios Reads: 1.208. Windows Reads: 1.216. Windows Under Load (with Loadline Calibration On): 1.192
601 Bios was a "beta" according to the Asus Website. No info on 602 bios. If they follow their pattern,
602 should not be a beta. If anyone finds the release notes to 602, let us know!
When the BIOS hardware monitor says 12C for the CPU when its really 21-22C, there is a problem. Its also a noted issue as far as Im concerned over at the Asus forums. I use air cooling and ambient temps are 21ish degrees... As far as I know, its impossible for standard air or water cooling to be below ambient.Quote:
Originally Posted by mk-ultra
Its moot point, really, since everything else works:P
I have an E8400 @ 3.6Ghz. with an Ultra 120 Extreme. I wonder why my core temps are reading normally with bios 0602 while others are having problems. Or are these temps too low?
CoreTemp & Everest -
Idle: 25C
Stress with OCCT: 38C
Stress with Orthos: 40C
Well I just got the new 0602 bios in an it runs much better than the 0601. I am running my Q6600 at 3730mhz on air 8x465 with my Transcends aXeRAM DDR 1200 at 1200mhz before i had too run them at 1103mhz.
Thoses actually seem good. (Im having problem with the 0502/0601 BIOS not the new one as I havent tried it yet...)Quote:
Originally Posted by INTREPID
I updated to Bios 0602. No problems. The only change I can find was to expand the 'tRFC' memory latency manual settings.Quote:
Originally Posted by Cranox
I installed the update from my harddrive. I created a 9MB FAT partition and EZ Flash instantly recognized it. This is easier than using a flash drive.
I am Having problems with random shutdowns i can prime it but after primeing it sometime it just reboots???
Something different with 602, i cannot acheive the same overclock with the same settings, without upping the volts more.... And the memory timing "expansion" looks to be pretty basic.....
602 seems to be better with overclocking the memory.
mine will not go over 960mhz stable on 601 and now seems to be working ok at 1066mhz
i like the new bios :)
Alright, I flashed 602. There is no improvement in the G-Skill, still capped @ 1066 (not the board's fault) but now my CPU temp reads 9-17c and setting vCore to 1.365 in Bios shows up as 1.334 in CPUz, Bios monitor and AISuite, although I'm 100% stable @ 3600 now at that voltage.
PS.
SPD Tab in CPUz now only shows only module size, WTF?
http://img254.imageshack.us/img254/6002/spdmg6.jpg
Download the latest CPUZ... Version 144.1.Quote:
Originally Posted by lowtcell
Its important to keep with the times, new hardware and old software versions don't mix to well. :shakes:
THANK YOU ASUS for this bios. fixes all my 1066mhz ram problems.
my crucial ballistix tracer 8500 2x1gb use to fail at stock settings with the 0502 and 0601 bios's. With the 0602 bios, i just completed 20passes of memtest :) finally.
i've noticed that with the 0502 and 0601 bioses, memtest reported a bandwidth of 5593mb/s at stock speed. The latest bios reports 4895mb/s. so i guess to increase stability, they reduced the speed a little.
finally i have a stable system with no random BSOD's from ram errors :)
Now, which bios is the best? Just the newest?