The Official Opteron 939 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

10-13-2005, 03:17 AM
Perc

ok thx guys ill be hone around 4pm est time... heres a shot of my memory settings talk to you guys later....

thx perc,
10-13-2005, 03:21 AM
Vapor

Alright, first suggestions just to make sure all's stable....use a mem divider! Second...just set trc = tras + trp in the meantime (10 in your case).
10-13-2005, 03:59 AM
airwolves

Hey Perc how does this thing compare to running a x2 as I have order one and hoping to preform better than the x2 or is it about the same??

Thanks
10-13-2005, 04:19 AM
Vapor

It performs differently....the X2 is a much better multitasker and better for things that are in fact SMP aware....the Opteron is better at benchmarks and non-multitasking.

I have both and I run my X2 for 24/7.
10-13-2005, 05:18 AM
NISCO PT

Quote:

Originally Posted by Perc

well its not stable at 3100mhz using 1.55v in the bios im not using my % settings yet so i have some voltages left if i need them. also im running with the 10x multi i dont know how it could raise the multi its self could you explain? i also suspect a bumm timming cause this chip will run 3gigs at the defualt v-core wich usaly is a good sign. the stepping is the famos 0530APMW CABNE. i dont think theres anything wrong with this cpu i think its me... ill figure it out also any tips would help as well.

peace perc,

only 1 tip for you
give some volts in cpu
i have 1 identical steeping and maybe yours need more to scaling
dont have afrayd, mine was at 1,8 and dont burn :D
look,i take off the bios 704, the same you have, because this bios limit the volts to something like 1,7xxvolts and hi need more to brake my records
now i am using bios 623-3. more vcore and the memory table is better
WELL??? :slap:
good luck M8 :clap:
10-13-2005, 05:19 AM
Rufus7

2,951Gig 1,312Vc Aircooled IHS ON CABNE 0530APMW 146 Opti 7H Prime Custom
Ambient 14°C-17°C

[img=http://img413.imageshack.us/img413/9552/2951mhz1312vc7hprimecustom2gq.th.jpg]
10-13-2005, 06:02 AM
Riverna

Here my opteron 144 apmw 0530. Without heatspreader and cooled by water...

http://www.forumdeluxx.de/gallery/da...5302870S16.JPG
10-13-2005, 06:10 AM
Vapor

How about more volts??
10-13-2005, 07:43 AM
kakaroto

I can buy a Opteron 148 with core CABYE.
Are they all 0528GPMW??, didnt ask it.

I analysed this topic and what i see are the following core/week and stepping:

Opteron 144: CABNE 0530APMW, CABGE 0536VPAW and CABYE 0536GPMW
Opteron 146: CABNE 0530APMW, CABGE 0534SPMW
Opteron 148: CABNE 0528GPMW and CABYE 0528GPMW
Opteron 150: CABGE 0534SPMW
10-13-2005, 09:56 AM
ozzimark

Quote:

Originally Posted by Vapor

There's that method to burn in, which worked for me but no one else has tried it (so no corroborating data yet--maybe I was a fluke)....

went to bed last night with the opteron ~1-2min prime95 stable at 1.5v, 2724mhz, running cpu burn-in. woke up and could get it to just under 2.8ghz, load temps didn't change. i'm at 2.82ghz or so now. i should bump up the volts to 1.6v.. i know my water can take it :D
10-13-2005, 09:57 AM
freestylercs

Is there anybody, having a CBAYE 148 0536 GPMW ??

Tomorrow, i´ll get one of it. Hoping for well results... :stick:

free
10-13-2005, 10:08 AM
kakaroto

Quote:

Originally Posted by freestylercs

Is there anybody, having a CBAYE 148 0536 GPMW ??

Tomorrow, i´ll get one of it. Hoping for well results... :stick:

free

Don't know, never see this on any forum.

Opteron 144 CABYE 0536 GPMW are average clockers, worser then the 0530 and 0528...

Let us know, plz
10-13-2005, 10:24 AM
sierra_bound

148 CABYE 0528 GPMW is pretty good. Have not been able to complete 32M at 3.5GHz yet. Requires too much VCore for my cooling. Will probably move to air cooling this weekend.

http://img409.imageshack.us/img409/4274/347132m0ku.jpg
10-13-2005, 10:27 AM
kakaroto

Quote:

Originally Posted by sierra_bound

148 CABYE 0528 GPMW is pretty good. Have not been able to complete 32M at 3.5GHz yet. Requires too much VCore for my cooling. Will probably move to air cooling this weekend.

[Awesome CPU image]

I know dude, but the 0536GPMW was average on the 144.
Week 0528GPMW is :toast:
10-13-2005, 10:32 AM
NiSMo

all us guyz over here in aus are getting the Opteron 144 0536GPMW steppings....

none of them can do 3ghz on water *yet* but are very close indeed.... (29xxMhz)

im getting two tomorrow hopefully they are a decent week, if not i will have to deal with 2.9ghz :)

hopefully my lapped TT Big Typhoon will do the job properly!!
10-13-2005, 12:10 PM
freestylercs

Quote:

Originally Posted by kakaroto

Don't know, never see this on any forum.

Opteron 144 CABYE 0536 GPMW are average clockers, worser then the 0530 and 0528...

Let us know, plz

ya, ill do.

by the way , here´s my new 144 0530 APMW 0081 Batch

http://mitglied.lycos.de/freestylerc...,48V%2032M.JPG

free
10-13-2005, 12:15 PM
Hugo van Dijk

I already mailed tons of stores and the only thing they have all got is, cabye 0536 gpmw :confused:
10-13-2005, 12:21 PM
kakaroto

Quote:

Originally Posted by Hugo van Dijk

I already mailed tons of stores and the only thing they have all got is, cabye 0536 gpmw :confused:

Have you asked alternate.nl?
10-13-2005, 12:25 PM
freestylercs

Quote:

Originally Posted by Hugo van Dijk

I already mailed tons of stores and the only thing they have all got is, cabye 0536 gpmw :confused:

thats the stepping ill get tomorrow. 148er.

free
10-13-2005, 12:32 PM
Hugo van Dijk

Quote:

Originally Posted by kakaroto

Have you asked alternate.nl?

No, they have got the 148 at the moment, But I thought they didn,t to these kind of requests.
10-13-2005, 12:32 PM
kakaroto

Quote:

Originally Posted by Hugo van Dijk

No, they have got the 148 at the moment, But I thought they didn,t to these kind of requests.

I called, they have CABYE too, but did not asked the week etc. which shops did you asked?
10-13-2005, 12:39 PM
Nossie

last week i pre-ordered a 146 @ alternate.nl , hopefully they will get them in stock soon :D
10-13-2005, 01:02 PM
RafaDel

I'm affraid when I get mine it will be from a crap step as usual... Anyway maybe some luck with a 148 one!
10-13-2005, 01:14 PM
Ferry82

Quote:

Originally Posted by freestylercs

ya, ill do.

by the way , here´s my new 144 0530 APMW 0081 Batch

http://mitglied.lycos.de/freestylerc...,48V%2032M.JPG

free

Your on watercooling right?

Can you please tell me your load temps?
10-13-2005, 01:38 PM
dinos22

Quote:

Originally Posted by Catalyst2211

Heh, I think I said what cooling Im using a few times already
Anyways, XP120 with Vantec Stealth and btw, the XP120 is a BIATCH to mount.

And the holy grail
3Ghz
2M run

http://img293.imageshack.us/img293/9165/2mrun1sq.th.jpg

Edit: Yea the Ultra-D, and well, I only know one Vantec Stealth so probably

yeah all the CABYE 0536GPMW CPUs seems to be similar to mine.....results posted a few pages ago...............here is another which is a bit better.......

there are a few which are stresscpu stable a smidge under 3GHz

Show 100 post(s) from this thread on one page