Printable View
Anyone else have issue with mutli not working with newer bios. Its really odd. The only way I can get it to drop to 8x multi is thru AI tool. I went from Vista to xp and lost 600 mhz of oc as well. I am starting to think my board is going south on me.
Ive got the board up and running with my E8400 but i still have an unknown device flagged in device manager. Im not sure what else it could be, Ive pretty much installed everything from ASUS site except ACPI driver??
sounds like you need to install the INF update from the cd.
Quote:
Originally Posted by JTeg86
do you have VISTA or XP?
i have bouth and in XP also shows that device unknown and in VISTA dosenīt :confused:
iīve just "disable" it and no problems so far :yepp:
In device manager go to properties of the unknown device, and click on details, post the "Device instance ID" string in this thread, and I can tellQuote:
Originally Posted by JTeg86
you what it is.
I got it taken care of, It was the Chipset INF update utility driver. Thanks for the help anyway:up:
And I must say...so far I am really happy with this board. We will see how well I like it soon when I start OC the E8400.
I love my p5k-e with e8400, it's a sweet combo, oh and Im like'n the newQuote:
Originally Posted by JTeg86
1012 bios, used to have that 16x pcie sticking at 1x problem but I have not
seen it once with 1012, so you may want to try that out.
I was having some problems with my P5K-E and 4 dimms recently. I had the board completely stable on all stock voltages/timings except 400mhz fsb and 800mhz on ram with 1.9v for a month, then suddenly instability this morning. I finally narrowed it down to the ram and tested each set in both dimms in Memtest x86, which all passed. With 4 dimms installed again, checking all gtl references and voltages the board would still instantly get Memtest errors.
Finally, i got fed up and flashed from 0602 to 1012 and now everything works smoothly so far. I wish i had performance numbers to post between the bios' but 0602 was just not stable.
Anyway some nice new things i noted in 1012 compared to the older bios is 400mhz strap on NB (333 was max before) and shown actual memory timings. The new layout of the bios options under Ai clock (was named Jumper Config before) are reworked and imo annoying, the older bios had all similar voltages togethor, ie. NB voltage and NB gtl reference were togethor, now they're apart.
This bios seems to boot a little bit faster but that could just be me.
I mainly posted this for people who may be having trouble and are on older bios', similar to my previous situation, with their P5K's and have tried everything and cannot get stability back from where they had it before. Of course i would only really recommend flashing as a last resort.
@BarbonetQuote:
Originally Posted by BarboneNet
Thanks for pointing out the bios voltage bug (the cynic in me likes to call it a hidden Asus Performance Enhancer;) ) and I can confirm it still exists in the 1012 bios.
In case anyone needs a frontside VTT/Vfsb measuring point: (don't be confused by the fan in the picture - it's just a 40mm fan I stuck onto the NB sink)
Now Im getting an unknown device flagged in device manager. Location says on PCI standard ISA bridge. What could this be?? Ive nearly installed everything possible!
thanks for confirm the volt bug;)Quote:
Originally Posted by syl
now i have an p5k pro...and there is the voltbug, too!
Might be the raid driver.Quote:
Originally Posted by JTeg86
Can somebody tell me how many SATA cables you get with this motherboard, as i plan to order all of my new build parts and was'nt to sure if i should order any extra just in case as i will be using 2 HDs and 2 DVD-RWs.
Ordering in the next few hours so any help would be good.
2, and one has a 90 degree angle connector.Quote:
Originally Posted by DJ Redrum
Thats odd since I flashed to the 1012 bios I lost 800 mhz of oc 24/7. I can even get into windows past 3600 when I use to run 3880 all the time. I wish I could flash this bios back to 0602 but the only way to do it seems to crash the bios and I really dont have the money for a new board if something goes wrong.Quote:
Originally Posted by Gen
Hey Crazykooter, you know if it were me and I had read this thread pretty closely and I saw there was someone running his e8400 at 4500mhz everyday of the week with Absolutely no problems of any kind ever with his set up.
You know I think I would try the bios he is running just to see.
One more little .02 cents here I think before I got too wound up over any bios I would first learn how to go for ward or backwards with any bios try before I loaded up any new bios. You can just use Asus update in windows to go to any bios you would like if you take the time to look at the options it offers under the little arrow tab.
Like I said I would look to see whao has had an easy time getting hi-speed from his system and see what he is using and try to emulate that.
See Sig.
WZ
Anyone else have the strange problem of Asus Update freezing as it trys to install?Quote:
Originally Posted by WeldZilla
All versions of Asus Update do this.
I`ve tried IDE hard drives, Sata, a few different versions of windows, and it still does this everytime.
This board works nice but it certainly has some very weird quirks.
Asus Update has always worked a charm for me.
What's VCore on those 8400's?Quote:
Originally Posted by WeldZilla
Installed Asus update a number of times new + old version...and number of freezes = 0.Quote:
Originally Posted by Rocket
Hello
I just flashed the 1013 BIOS, and it solved some issues for me
First of all, the CPU temp of my E6400 is now corectly reported. The last BIOS that had the correct behaviour was 906...
My 3500 Mhtz OC is stable (NHU12)
This bios is my new referent one...
JMJ09:up:
Quote:
Originally Posted by jmj09
Glad to hear, I'll be flashing now. :D
Nice I'll be flashing it soon.Quote:
Originally Posted by jmj09
Here's the link to 1013:
http://dlsvr02.asus.com/pub/ASUS/mb/...E/P5KE1013.zip
any info on 1013? nm found it.
Version 1013 2008/04/29 update
Description P5K-E BIOS 1013
Support new CPUs.
Flashed 1013, so far so good:up: