melopll & MrRevhead:
0521 DPMW E3 / FC -17stC on CPU / Test on DFI NF4 Ultra-D / IHS OFF ;)
Printable View
melopll & MrRevhead:
0521 DPMW E3 / FC -17stC on CPU / Test on DFI NF4 Ultra-D / IHS OFF ;)
Wow.... I didn't know the NF4 was able to reach HTT380!!! It's probably DFI....Quote:
Originally Posted by Mardok
Quote:
Originally Posted by melopll
My DFI NF4 SLI-D can HTT = 456MHzQuote:
Originally Posted by Mardok
http://mardok.ovh.org/screen/!1.JPG
Oh my God.... can all SLI-D mobos do 450HTT or did You do something in yours?Quote:
Originally Posted by Mardok
Hi Mardok!
Nice 0521DPMW.
How does my 0547GPMW run on your DFI?
Just sent Stonka toe CPUs. One of them is an 3000+0521DPMW.
My 146 CABNE0530APMW is still good runnig.
Greetings to Poland
If anyone wants to 'play' with a week 17 naked e3 venice 3000 pm me ;)
I have your SD ;]Quote:
Originally Posted by Rufus7
Info about SD in SD topic :P Now i have 3080MHz
I have 2x DFI and all can 400+ HTTQuote:
Originally Posted by melopll
Max O/C on WC : http://mardok.ovh.org/screen/pi/SPI16M_10-33.png
What is the max stable speed?Quote:
Originally Posted by dz`
naked on the stock cooler
2.7 @ 1.45v 30 hours prime stable
2.84 @ 1.65v :/ occt
Might shine on water or phase? (LBBLE bugged?)
I have a 3000+ E3 LBBWE but i haven't started to burn-in yet... waiting for the mobo!!!Quote:
Originally Posted by dz`
any idea what a LBBWE 0552FPCW could do?? its now sitting at 2500mhz stock volts, stock cooling, i know it can do much more then that. u guys have any ideas on what to expect with WC (storm)?? 52th week should be a good one right?
http://img517.imageshack.us/img517/8...5mhz9ha.th.jpg
24/7 settings for my little 3000+ (LBBLE 0545XPMW) and G.Skill PC3200 Value ram, not done tweaking the mem will try to run it all a bit faster but I'm pretty sure 2800mhz (on air) aint doable with my 3000+ :(
- Schmetterling
Hi !!! MardokQuote:
Originally Posted by Mardok
I want "A64 DDR Mhz by Mardok v1.2"
_/|\_ Thank You.... :D
bhupaj@gmail.com
And... My Venice
1x DFI NF4-D (@ SLI)
1x 3000+ Venice Core (LBBLE 0516DPCW)
2x 512MB Corsair DDR400 v.6.1 UTT
2x 6600GT ELSA
1x Enermax EG465P-VE (FMA) 460W
1x Seagate 250 GB Sata2
http://www.vmodtech.com/files/7-superpi_32m_00.jpg
NVM, was at 2.87, but after putting a mem divider of 7/10 running at 2.8v, I got it to 2.95 stable @ 1.52v! too bad it doesnt seem to want to go over 2.97ish without having issues, even after tweaking ram, volts, everything. O well, 2.95 stable is a happy medium for me :)
http://valid.x86-secret.com/show_oc?id=94804
http://s9.photobucket.com/albums/a74...rent=NEWOC.jpg
Once I get some watercooling (sometime in the near future), I may see if I can get this chip even higher.
Stepping & cooling info?Quote:
Originally Posted by xenium
I would like to know that also :)Quote:
Originally Posted by MrRevhead
cooling is a Thermaltake Polo 735, and stepping....Eh, Im not in the mood for removing my heatsink/fan at the moment, but I am going to have to get in there to remove my 7900gt for shipping, so I may as well take a look. BTW, at 2.95 @ 1.52, it wasnt stable, but at 1.58v it was! temps at idle are right around 30C and under load are about 50-52C. Not too bad, but by the time I get watercooling, Ill have a new cpu probably. Its just a shame my ram is very nice, but hates OC with a passion. I could only hit 275fsb before I had to put it on a mem divider, even after pumping some volts into it. Right now its runnning 3/4 stock timings because it throws a fit the second I adjust timings.
*OH, btw guys, should I put all OCs back to stock before I take my 3200+ out?
Good safety measure to eliminate any possible problems from occuring, although clearing the CMOS may be a quicker option.Quote:
Originally Posted by xenium
Post back your stepping once youv'e found it please.
stepping on my 3200+ is:
ADA3200DAA4BP
LBBLE 0543WPMW
Z836406K50219
I donno what exactly I was supposed to put, so I just listed everything that was on the chip.
Quote:
Originally Posted by xenium
then your stepping is LBBLE 0543 WPMW, batch # 219 :D
good low batch # and *PMW stepping tends to indicate good clocker
that is certainly true in your case, nice chip there
I guess you learn something new everyday :woot:
hi guys just got my opteron 146 2.0ghz havent done anything yet to it as ive only just built it but just running smart guardian to see what temps im getting for the cpu and its at 21degrees its only standard heatsink in a shark case thought it would be abit higher then that?
just scored 9534 on 3d mark 05 dont know if thats good or not??
guess its time to try and overclock now then any advice?
thats pretty bad seeing as how my 3200+ and 7900gt beat that score. You need to OC that opty a lot more dude, that will bring up your score plenty :toast:
I temporarily have three Athlon64 3200+ BOX Venice E6 stepping with the following markings :
ADA3200DAA4BW
NBBWE 0602DPCW
Z880307A60125
ASSEMBLED IN MALAYSIA
ADA3200DAA4BW
NBBWE 0608GPCW
Z902767B61771
ASSEMBLED IN MALAYSIA
ADA3200DAA4BW
NBBWE 0612AAC
X024637C60739
ASSEMBLED IN CHINA
I have to choose one but unfortunately for me I can't test them before I make my choice.
Please help me choose the best overclocker.