Printable View
I have seen a A64 ADA3000 AEP4AX CBASC 0406UPMW in action It did 2600 pifast stable @ 1.67 v
http://server6.uploadit.org/files/St...iFast48sec.JPG
Tis @ Boxed cooling. But pifast woud only run 1 time. 2550 was no problem. The cpu could do more when he is gonna use beter cooling. Maybe a 3.0 @ Prom M II GT ?
with my shuttle
I have a K8n Pro, An50R and a K8NHA Pro :)
http://membres.lycos.fr/cpulloverclock79/37s......JPG
http://membres.lycos.fr/cpulloverclock79/34s.JPG
http://membres.lycos.fr/cpulloverclock79/memory.JPG
Firstly, hi guys. Been browsing here for a long time and finally decided to drop in from OCAU :)
Un-modded AN50R, so ram is at 5:6, but I am trying to get some BH-5 and do some mods soon to the board, so fingers crossed :) Cooled with an LS.
For info, the mutliplier is at default (11) so with some good ram, vmods, and a drop of the multi should prove to provide some fun results :) I was thinking of dropping the ram ratio right down and push this chip just to see what I can max the cpu at :)
CPU- CAATC 0351XPMW
http://users.bigpond.net.au/fxr91/A64.jpg
nice, get a vcore mod going mate... you could reach even much more :)
Yep, vmods are next on the cards :) The way I see it, if I get the chip to that speed on default voltage @1.68, it should go further around 1.8 :cool:
I have the trimpoits sodlered up, just gotta get the guts to solder to the board now. Got an old dead 8RDA+ here I will be practicing on :toast:
My second 3400+ is very bad
2.8GHz at 1.75v unstable
2.84 at 1.8v or 1.9v
there is a problem
look what i got ;) don't take attention to the vcore...it's just cause i've keep the setting of my 3200+
it's the first boot i can't test today but tommorow i will try to clock it ;)
3400+ CG core :)
0408
(EDIT) 2700mhz @1.7v stock Mach 1 cooled
http://sites.rapidus.net/maxbleau/3400+%20CG.JPG
http://sites.rapidus.net/maxbleau/3400+cgpic.JPG
good but CG core isnt better in oc
Boogtop yup nice chip you got there. I am facing similar results with my CAAOC TMPW err something like that. 2.75ghz @ 1.7v stock mach2. These chips seem to be doing very well
i got strange thing with this chip...i can't get it prime stable at 2.6ghz but i can run SuperPI and 3dmark around 2.85-2.9ghzQuote:
Originally posted by CrashOv3r1De
Boogtop yup nice chip you got there. I am facing similar results with my CAAOC TMPW err something like that. 2.75ghz @ 1.7v stock mach2. These chips seem to be doing very well
it's look like at any speed over 2.6ghz he are unstable in some prog like Prime and Pifast but he is 3d benchable at 2.9ghz :confused:
max stable:
Prime95: 2.55ghz@1.65v
Pifast: 2.6ghz @1.7v
SuperPI 1M: 2.85ghz@1.85v
3dmark01:2.9ghz@1.85v
I 've the same proc and only 2850MHz in bench at 1.8-1.85vQuote:
2710 at 1.67v
too bad
http://membres.lycos.fr/cpulloverclock79/363.JPG
http://membres.lycos.fr/cpulloverclock79/462.JPG
294.75 1:1 = World record with an A64 and in single??
http://membres.lycos.fr/cpulloverclock79/4599.JPG
in synch mode with my kingston HyperX PC3200
http://membres.lycos.fr/cpulloverclock79/303.75.JPG
http://membres.lycos.fr/cpulloverclock79/365.63.JPG
http://membres.lycos.fr/cpulloverclock79/367.9.JPG
http://membres.lycos.fr/cpulloverclock79/369.JPG
http://membres.lycos.fr/cpulloverclock79/glace.JPG
I just got an A64 in and it reads:
ADA3200AEP5AR
CAAPC 0408TPMW
9561925C40400
Funny but it looks exactly like Boogotop's 3400+. I haven't been able to run it yet, as I am still waiting for my K8Npro to come in. Should be up by tommorow. I am looking forward to some AMD goodness! It's been a while oh green one!:)
Just done this with my new FX-53
Still the "old" Cascade -112C :slobber:
:slobber: :slobber: :slobber: :DQuote:
Originally posted by Tom Holck
Just done this with my new FX-53
Still the "old" Cascade -112C :slobber:
brutal clock here!!!
I hope you have a gfx handy for your cpu Tom Holck :)
would you give an a64 2 volt for a long time ?
or how much would you give for a long time ?
my an50r is detected in Biostar K8NHA Pro and all the timings are available
no problem to boot in cas2.5 with my kingston HyperX PC3200!!!!!
my a64 3000+
http://membres.lycos.fr/thetankerx/k...0xpmw/3003.jpg
http://membres.lycos.fr/thetankerx/k...d/DSCN0129.JPG http://membres.lycos.fr/thetankerx/k...d/DSCN0128.JPG
i could pi 1Mo at 2868
i think with the best reglage of my phase change i could pi at 2880/2900 :/
http://membres.lycos.fr/thetankerx/k...3000+0350xpmw/
http://membres.lycos.fr/thetankerx/k8npro/fccold/
Good Job tyo ;)
good chip too XPMW 0350 pawaaaahhhhhh :D
mister where are your xpmw :banana: :p:
:smileysex
so I been toying around with this chip. I had 250X10 last night prime stable at 1.7v but this morning I could not boot windows. I Had to bump down to 245x10 in order to load windows. Looks like I need the vcore mod. What do you guy's suggest as a 'safe' vcore range for a watercooled 3200+.
Also I had some real problems running 2x512 of bh-5. Wouldn't overclock even to 205. 2x512 of pc3200 OCZ EB worked well, but I cannot manually change the timings or the system will hang on POST. Only in nvidia system utility will the timings change.
So I am gonna now see how low I can get this vcore at 245. Not much I think but it's worth a shot.
After reading this thread I decided to buy A64 3200+ (moving from 2.4c @ 3.6)
So, what is the best stepping for this CPU?
One more question:
Should I go for the GA-K8N Pro or AN50R?
thx
And sorry if my english is incorrect
Im french :P