Printable View
Here is a reference -> http://www.gigabyte.com.tw/Support/M...flashBIOS.aspx
@Bios is much less of a hassle when you able to load the os in the first place ;)
I mean if you really can't get a floppy, just cross you fingers you can get thru the windows install. In the past few days, I couldn't even get thru windows format with my raid config w/o floppy disk of bios/drivers...
Can someone tell me if there is a divider on this motherboard?
Im only getting 5400 ram so i need a divider.
Thanks!
C_D
No dividers yet.Quote:
Originally Posted by cool_dude
ARGH :shocked: :mad:Quote:
Originally Posted by darkandlong
Gigabyte need to make this damn bios, so we can all have dividers in!
Anyone know an email to email cos i dont wanna be waiting! :p:
my new stable score :)
http://img92.imageshack.us/img92/560...2deflz9.th.jpg
I realy hope this is the performace to expect from E6600 on these cards. The biggest question for me is if -DS4 clocks as well as the DS3 seems to do.Quote:
Originally Posted by misteroadster
Im getting Mushkin XP2 6400 2x1GB anyone tried those on this card?
I need really quickly help about this board layout. I ordered Gigabyte GV-NX76T256D-RH (7600GT Heat Pipe II) with DS3, and now I'm not really sure if the card will even fit in the board. Please look at these pictures about this card, and tell me if the card will fit on DS3: http://www.hardwarezone.com/articles...3&id=1908&pg=2.
Especially this: http://www.hardwarezone.com/img/data.../1908/Back.jpg
Thanks.
FSB 492 :)
1m@492
http://img88.imageshack.us/img88/823...m492sighb6.jpg
16m ends on 492 but the PI score was worse so its screen on 490 :)
16m@490
http://img73.imageshack.us/img73/433...m490sigag9.jpg
Dirt, that is NOT a retail E6600. Completely different chip. Has anybody got to 400FSB on a DS3 with a retail E6600? If so, PLEASE let me know how you did it, 'cause I'm STUCK @ 367FSB. And that's too HOT for my liking @ 1.5V.Quote:
Originally Posted by Dirt
Brahamzy, I know that it is a ES processor. I have my stuff ordered but dont expect delivery until in about 3 weeks som I have plenty of time to change my mind and go with a E6400 instead. If the card can not manage at least 9x400 it is quite uninteresting to be honest.Quote:
Originally Posted by Brahmzy
Do you have to use 1,5v to the processor to reach 9x367?
I am trying to overclock a d805 with xms2 6400 cas 5 memory on ds3. It runs fine on stock at cpu 1.25v and memory 1.90v. But when I overclock to 2.66 -> 3.3ghz with 166 fsb, it is not stable. I have increased the cpu voltage but it wouldn't stablize even at 1.55v. Memory is set to auto, and the other voltages like dimm, mch, pci-e, fsbover are also auto. Should I try different voltages for these? The tomshardware article was able to overclock to 3.3ghz on 1.33v...
the vMCH Mod is good for overclock, with 1.6v it run great :)
http://people.freenet.de/chris070719.../SuperPi-4.jpg
vsamaco, try unplugging any usb devices, it worked for me.
That would mean I would have to disconnect my keyboard and mouse... though i have the ps2 converter. Not sure how having usb devices will cause the system to be unstable...
Well I did set my dimm voltage to +.1 and I can run 3.36ghz stable with only 1.37 vcore. 3.60ghz isn't a happy camper with higher vcore...
do You have c2d 6300 or 6400? nice results ;)Quote:
Originally Posted by vsamaco
what is the vmch mod? also why do you use setfsb instead of easytune?Quote:
Originally Posted by Chri$ch
DS3 board mods hereQuote:
Originally Posted by BottomsUp
May be an OT question but I realy need to know. Im planing on bying a DS4 mobo and a E6600. It seems likley that the DS4 has the same problem as the DS3 with high fsb at least for a starter until BIOS revs. develops, what I wonder is: If I buy a E6600 can I lower the multiple to 8 and assume that the fsb problem will be gone or is the fsb problem tied to Conroe core??
Hey, will that rig on my signature work without problems? I also have one LG DVD-RW IDE, one Seagate 7200.7 Barracuda160GB PATA, and Hitachi Deskstar 80GB SATA2, so will the PATA and SATA HD’s work at the same time? The rams are 1.8v so they should work w/o problems.
important question:
what soft (cpuz, pseedfan oraz giga EasyTune5) shows ~true (~ ofcorse) VCORE?
cpuz for examlpe shows 1.28 - EasyTune 1.3v - what is almost true ? measurer?
He's using a P-D 805, so not impressive at all :p:Quote:
Originally Posted by logigamer
@logigamer, what vcore, vdimm, gmch, pci-e and fsb voltage settings are you using? I'm getting major instability above 430fsb for some reason and using the F4C bios. This board seems really picky about random settings..? :cool:
heh, 805 :D didnt see :toast:Quote:
Originally Posted by trojan
i have vdimm to +0.6v
vmch +0.1v (i didnt see any direfent with +0.3v)
fsb +0.1v or 0.2v
max FSB for me from BIOS is 495, and spi 1m and 16m i did with this fsb.
Nice, on air or water? I'll try these and kiwis later on and see how it pans out. Maybe not +0.6v on vdimm though, not sure how much these 6400 HZ's can take. (0606's :D)
water for cpu only, i think that results are not bad ;)Quote:
Originally Posted by trojan
1m
http://img71.imageshack.us/img71/927...bestsigpl7.jpg
16m
http://img223.imageshack.us/img223/7...bestsigxg5.jpg
So is this board slow like some ones say in here? I mean like booting to Windows is slow, surfing is slow, mouse is lacking, etc. I haven't got the board yet, but I really hope that it isn't like this.