Thermal Interface Material, like Arctic Silver 5 and such. ;)Quote:
Originally Posted by TEDY
Printable View
Thermal Interface Material, like Arctic Silver 5 and such. ;)Quote:
Originally Posted by TEDY
it's AS5 ;)
dunno maybe i didnt applied it correctly
i have my 148 runing with multi x10 , and no problems (300x10) with patriot TCCD (300mhz@cl2,5-4-3-7 1T@2.65v)Quote:
Originally Posted by coop
Another strange problem occured, cpu was stable with 11x271 @ 1,41v, so i gave 11x272 a try. stable for about 10 secs :D
After wondering about this i tried 11x271 again and result was not stable, failed stresscpu after a minute or so (tested everything with it since it shows errors after 5 mins when prime takes 1,5 hours).
Question: Is this rig making fun of me or what ?!? What can i do now ? Is one component faulty ? Ram seems fine since it can do 1000% win memtest, cpu i don`t really know but a few mhz less it`s stable even if u test it twice :D
mainboard is DFI Expert, brand new so should be ok either. PLs help me before i rip off my own hair :)
lol
OCCT STABLE prime reports error
2.9 @ 1.413v....
here it goes again....damn buggy sp2004
found Opteron 146.. Is this a good overclocker CAB2E 0546GPAW ?
Opteron 146 CABYE 0540 FPMW
result´s here:
http://img308.imageshack.us/img308/2...zprime41ts.jpg
http://img308.imageshack.us/img308/8...hzprime9mb.jpg
Dual Prime it´s EXTREME HARD test, and was stable!! 0540 It´s really a extreme hard over serie!!!
Seems pretty good, 2,9ghz 1,4v is possible. Getting the same stepping myself in a couple of days. The 148 i have, does 2,8ghz 1,4v IHS off, not very good for a CABNE 0530APMW.:shakes:Quote:
Originally Posted by 865pe
http://img403.imageshack.us/img403/6892/fx5ar.th.jpg
So you have problems with yours as well I see. Do you accept being OCCT stable as truely being stable...so far I have found this to be atleast. I haven't had any problems during game play for hours on end atleast.Quote:
Originally Posted by TEDY
:D Check by Yourself..........Quote:
Originally Posted by 865pe
http://monsterprozi.mo.funpic.de/opt146html.htm
:toast:
what's the easiest way to cpu burn in ? any links? :D
**DDR610 SP32m
http://img354.imageshack.us/img354/5...p32m5ar.th.gif
**DDR620 SP32m
http://img354.imageshack.us/img354/6...olts6ip.th.gif
**DDR620 3d05 stock 7800gt Futuremark 1613432
http://img526.imageshack.us/img526/5...t1663rb.th.gif
da-key: not fair your temps are low :)
your lines are :banana::banana::banana::banana:ing stable ...all this with antec?
big thanks :toast:Quote:
Originally Posted by HARDCORECLOCKER
OCZ 600SLI in my sig. Great psu.Quote:
Originally Posted by TEDY
This is the highest I can get my 144 on stock air + paste :(
http://img.photobucket.com/albums/v2...0r/2700mhz.jpg
CABNE 0544 YPMW
wow...Quote:
Originally Posted by Carlz0r
a lot vcore.. how are your temp´s??
if i was you.. sell this one and try again with other one!!
My temps are fine, doesn't go above 55 degrees at load. I plan on selling this and getting a 148.
Well i´m sorry but my cpu pass OCCTool but it freezes at 3d aplications,i have to lower 5 mhz the htt to br truely stable.Quote:
Originally Posted by ugp
http://img477.imageshack.us/img477/7564/273766wr.jpg
http://img432.imageshack.us/img432/1...0medium7ez.jpg
http://img411.imageshack.us/img411/7...0medium7sv.jpg
I can't oc more than 10x269 ???? check the foto ,for any Help thanks in advance.
kosmo
[img=http://img429.imageshack.us/img429/558/fotografies7097bk.th.jpg]
Sorry Kosmo but your foto is very confused and the timmings are hidden,try another angle and larger file please.
I hope that is more clear.
http://img434.imageshack.us/img434/4...s7097nu.th.jpg
Are you kidding?? It's impossible to read sth!:(Quote:
Originally Posted by kosmo
...finaly after the death of my CABBYE 0540 FPBW I got a good one...CABYE 0540 FPMW batch 297...thanks TEDY :clap: :clap: :clap: for this one...so I can`t pass 3ghz with OCCT yet...but I think this one has potentials...:D max tcase 63°C and wattage 61W
http://img274.imageshack.us/img274/484/29901385tz.jpg
Some more testings tomorrow...
Regards,
Primoz
i can reach 3ghz at 1.6 but it freezes in 3D aplications altough it runs OCCTool,to pass Prime and 3D games i have to put it at 2950 ..it´s ridicolous.:mad:
Hi all, new to the forums, joined long time ago but never posted, was hoping you could lend a helping hand, with all the opteron threads i thought if anywhere you lot might know how good a stepping this is. I can get this 146 opteron delivered for £145 brand new retail stepping is this Cacje 0546bpmw
1362067k50512 does anyone have any knowledge of this stepping ??:confused: hoping to spend my money on a good clocker :D
Thanks in advance
=GAMMO=
my opty prime stable watercooled:
http://membres.lycos.fr/starostise/O...00MHz_1.56.JPG
Man, I wonder what the deal is with the complete lack of voltage scaling? What is changing in the MFG process? My opty hits 2.8ghz 24/7 stable with 1.4V, takes 1.45V for 2.9, and NOTHING makes it stable beyond 2950. Tried 1.6 just to try, but 3gig was a no go and didn't feel like frying my pretty descent O/C chip.
Does anyone have info on OC results with CACJE? How are these? Need to know asap. Thanks.
Hi, can anyone tell me if the following opteron 144 is a good overclocker,
CAB2E 0548EPAW, info needed asap
Thanks :confused: :confused: :confused:
Quote:
Originally Posted by Fallengod
My 148 is setting at 2884(262mhz) 1.38v(1.375 + 104%) Prime stable around the clock. More volts doesn`t seem to equal speed with this chip. :mad: Got to update the sig...
How is this stepping for a 146:
CAB2E 0546FPAW
I am unable to test it yet but it is the one I have. I will be using air cooling.
yay finally the moderation period is a over and i can post. :toast:Quote:
Originally Posted by killer_pav
er i have a 144 cab2e 0548fpmw its doing 2.7g with 1.45v tho. not as good as some other stepping but im on stock heatsink with a 120mm fan over it.
will post up pics when i reach home from work :banana:
here is my updated CAB2E 0546 bpmw The screen only shows 8m but I had just ran a 32m and click ok before I got a screenie...so I didn't feel like redoing it.im going to try to push it further but so far my attempts at 3 ghz have been unstable....contemplating taking off IHS...does anyone know what kind of mhz gain it may give me?
http://www.surrealtextures.com/screenie5.jpg
Just trying to get a CABYE , in my location its extremely difficult to find one, cuz CACJE came in stock everywhere :(
Does the CABYE 0540FPMW have a ticket to the 3GHz club ???? on water ..... :rolleyes:
Here is my Best 1M with my 146. Using OCZ PC4800 Elite Plat for ram. Great stuff.
http://www.xtremesystems.org/forums/...1&d=1135941459
http://img519.imageshack.us/img519/4...139v8ve.th.png
Opteron 146 CABYE 0540 FPBW
That's extremely good. What cooling is that?Quote:
Originally Posted by laydback
It's not as though any of you guys with a 3GHz is about to sell out within the next two weeks, eh? :)
heres mine so far. sorry click ok before i took the scr shot.
will more this weekend with better heatsink. :cool:
pi times aint very fast.just look at the 32m one. im folding while running the superpi.
http://i5.photobucket.com/albums/y199/guangg/2.jpg
divider 150.
Could you guys please try running with a 9x multiplier, FSB to 325, divider 120/200, ldt 1.50, and bh based ram at
enable
2
2
5
2
7
14
2
2
2
2
3120
enabled
auto
0
weak 2
level 1
0.9ns
fastest
0.5ns
256cycles
enable
08x
04x
disable (4burst)
Im getting bsods with everything over fsb320 and al dividers other than 100/200.
Would be greatly appreciated, could you also note which bios? I've been running 510-2FIX, 704-2BT with no avail.
Here's another 148 CABYE 0543FPMW. Running it at just under 3Ghz in P95 with my current cooling (48c load) and IHS on. Damn chip decided to stop right at 11x273 at what I think is its sweet spot vcore...
It's a little better than my 148 CABYE 0528GPMW (P95 12+ hours @ 2950). I might pull the IHS's off to maybe get a more out of them next time I tear down the machines for maint.
Scottk what board are you using,and what´s your idle temperature??and wy don't you try 300X10 with 1.6 vcore?Quote:
Originally Posted by scottk
It's on a DFI Ultra-D. Idle/Load reads 36c / 48c in ITESG. I tried up to 1.6225 vcore (1.475*110%) in bios and it didn't help to break 3G... just raised temps into the 50's. I think I just need to pull off the IHS to reduce the load temp. I'll get that 8 MHz somehow, lol.
a lot of your CABYE , CABNE, etc doing 3GHz at stock voltage, HOLY CPU !!!!!:slobber: What cooling for this?????
Is it possible to go 3GHz on air like the typhoon or so?
@scottk:
0543 FPMW here too, runnin 3ghz prime at around 1,45 but nothin more, like you said. 3040 not stable with 1,525v :(
got 34° or 35 ° on my expert. Should i take off IHS ?
I wish i could do 3ghz with stock voltage.. evne with 1.7v i cant hit 3ghz.. 2.95 is my max for 1M.. 2.9 for 32M
youre runnin on nf4 ultra-D ,right?Quote:
Originally Posted by perry_78
might be bios problem with dividers, a good bios could fix it,
I had this kind of prob on my neo4 pl. too (although with a winnie),
with higher htt and divider like 166 a had massive stability problems, the only bios on my board capable of runnin stable on that was 1.6, but again sorry, Im not on dfi
Another thing about this 148 cacje... it doesn`t play nice with a 10x multi:eek:
Also I am finding the voltages on the DFI are all over the place when using the +VID.
sli-dr, i'll try the 603 bios.Quote:
Originally Posted by Aerosupra
Most of the reports I've seen from folks who removed their IHS show some worthwhile gains from the reduction in load-temp. Have you tried higher than 1.525? Seems like you have a bit more cooling headroom if those are load temps.Quote:
Originally Posted by ic3m4n2005
max async to 9, read preamble to 16 and im a happy camper :)
Try:Quote:
Originally Posted by perry_78
MAL 9 - RP 7.5,
Mal 9 - RP 7
Mal 8 - RP 6
Mal 8 - RP 5.5
tRFC:12 instead of 14
Also play with TREF, Drive Strength and Data Drive Strength.
Bios: http://xtremesystems.org/forums/show...0&page=1&pp=25
Quote:
Originally Posted by Aerosupra
Yeah I can OCCT, and 32M all day long on my CABYE 0540FPMW at 3ghz 1.55v on a freezer 64
RP 16? And what is ur max now? :)Quote:
Originally Posted by perry_78
Hi Guys,
Im new here as a member but have been reading ALL these pages for a few weeks now
You guys rock with some of your clocks...im very impressed..
My opty seems prime stable at 2.87 but im sure i can get more as im using a 166 ram divider...
Im sure ill be asking alot of questions shortly so i wont bother today...
Just wanted to say ' WOOT' im in the opty club :)
time to keep on tweaking
Ive put a screenie in attachment for your eyes to look over... Please tell me if you spot something wrong as there is probably lots... Never really been into OC'g until NOW so i need to understand cas tras etc etc....
Welcome to XS fraggy!!!:) We are here to help so feel free to ask questions..
Almost 24sec 1m !! http://img413.imageshack.us/img413/1609/2587rf.th.jpg and a 22min 11sec 32m http://img521.imageshack.us/img521/7...132m7un.th.jpg with my H2O cooler.
Nice one coop! :D
Now i will see the 24.xxx! I can't get it .. can run 3200 1,55 but anything more not... :(
Got my Opty 148 from New Egg out of New Jersey.
Check out the awsome packing job.
http://www.designelectric.biz/images/PC300012.JPG
http://www.designelectric.biz/images/PC300013.JPG
Luckily it still runs @2.9ghz with an FX-55 hsf and 1.525v.
I'm going to try and send these photo's to AMD so they can see how flimsy that crap is.
LOL !!! I've read about things like that before, somebody ordered an FX-57 off eBay and their green cardboard carton was all beat up! I bet somebody dropped it or something.
Dropped it? I think someone played soccer with it.
Hmm I just noticed, I have a 146 sitting here with the same stepping as you, CAB2E 0546FPAW. I was hoping for 3GHz, but then again I do have some better cooling, and I have another 146 on the way from NCIX because they had some earlier steppings. I will sell the one I dont want :) Can you get yours to 3GHz with more voltage?
Not sure I want to push it much further. Gets up around 50c already and I'm not sure what a "safe" max voltage is.
Single core, 1.6v should be ok, but yeah if you are already getting up to 50c then you should get some better cooling.
For someone asked for CACJE, here is one.
Opteron 144 CACJE 0546APBW
@Stock VCore
<a href="http://imageshack.us"><img src="http://img414.imageshack.us/img414/1544/2727smallfft8hrs21rj.jpg" border="0" width="1600" alt="Image Hosted by ImageShack.us" /></a>
@1.2VCore
<a href="http://imageshack.us"><img src="http://img414.imageshack.us/img414/7097/270x9smallfft12hrs17mk.jpg" border="0" width="1600" alt="Image Hosted by ImageShack.us" /></a>
Currently working on 2880MHz @1.5VCore. 3GHz is definitely a no-go with air-cooling, however. :(
BTW, how low can you go with VCore? Say, with 2.8~3.0VDIMM?
http://i5.photobucket.com/albums/y19...SuperPi-28.jpg
I am in need of some dire help with my Opty. I can't get any overclock at all to Prime what so ever...everything fails within 1 minute of Prime. I mean everything. I have tried all kinds of voltage at 300x10.0 there is. It is OCCT stable at v1.475. I don't understand this. Can something runnning in the background cause Prime not to run properly...? I am of lose of ideas with this.
WTF how can it end up like that :eek:Quote:
Originally Posted by Gitsum
It looks like someone took a mixer from the kitchen and mixed it up.
Maybe someone tried a bit of torture BEFORE it was in a mobo for a change :wierd: :cord: :rotf:Quote:
Originally Posted by eva2000
Hi AllQuote:
Originally Posted by ugp
I have the same trouble with OCCT.My CABNE0545 does 2Ghz on 1.2v.It is prime95 stable,3d2001/3/5 stable and folding stable but fails on OCCT.It is now at 2.5Ghz still on 1.2 v and still passes Prime 95 etc but still does not pass OCCT.
Smiffy
The ones in my sig. Ordered a new CPU waterblock, so I hope that helps even more. I have to RMA my GeiL chips because I overvolted them (im suprised they still work). Im the meantime I'm waiting for my OCZ Plat Rev. 2 set to arrive from newegg so I ship these GeiL back for RMA. I wonder if I'll have any success with those sticks. Here's a couple pics.Quote:
Originally Posted by Alaza
http://img346.imageshack.us/img346/7...05209em.th.jpg
http://img346.imageshack.us/img346/8...05212up.th.jpg
http://img346.imageshack.us/img346/9...05405rk.th.jpg
http://img346.imageshack.us/img346/3...05412rj.th.jpg
I believe my problem lies within my RAM..does anyone have any recommended settings for RAM with a Opteron?
I updated the post above. http://www.xtremesystems.org/forums/...postcount=4222
It shows timings, we have similar rams. Do you use all four slots like in your sig?
No right now I am using 512x2 for testing. I really don't need the 2GB total memory. 1GB is enough for me and my games and usage.Quote:
Originally Posted by coop
I use the same settings for when I use water also.
Well since I can't get any overclock Prime Stable I am going to be Xtreme and undervolt my Opty! Right now at v1.2 and load temps are 33-34C with Thermaltake Big Typhoon.
last week my opty was idleing at 32-33c... so i started to put everything back in my case.. reapplied some as5 now im idleing at 40-43c at stock speed... i reseated and reapplied as5 a few times already no change in temp... is there another option? im on water cooling
I have had this happen as well...and then all of a sudden it went back to normal...I cannot explain it. I am really thinking about popping the IHS off my Opty. Have been told many people experience extreme temp changes at full load...I hear the contact between them is very poor.
i might pop the lid off my opty also... ive been messing with this thing a for few days now trying to get my opty back on the right temp... thanks for the info ugp i thought this only happen to me..
Its ppl like you that make ram soooo expensive, why the hell should you send ram for RMA when YOU overvolted them :rolleyes: :nono:Quote:
Originally Posted by laydback
Dishonesty @ its best :slap: :mad:
I just don't know how to take the IHS off to begin with.
Because they weren't hitting their garunteed speeds of DDR600 with any of the suggested voltages. Once I gave em 3.1, guess what, DD600. People like me that make ram expensive??? I could remember 2 years back how much memory cost then, compared to then the cost for memory now is dirt cheap. If Newegg didnt want to lose money on RMA's because of "people like me" then they shouldnt offer them!!! Im gonna leave it at this, but I gotta be honest with you, your comment made me grit my teeth a little.Quote:
Originally Posted by alpha0ne
Alright people break it up...we all know even if we burned something out we would still try to RMA it to save the money.
Lets just leave it at that...! :D
OK I apologize for my comments, no way did I know they were not to spec.Quote:
Originally Posted by laydback
Cheers
yay were all friends again let all have a beer :toast:
just popped lid off the opty still same temp... mang this sux
mayb u can post ur problem in the water cooling section with ur w-c setup, maybe the guys over there can help u with the bad temps u are encountering ;)
Play with multipliers and dividers. For some reason certain multies work better than the others. Same goes for dividers. (166 divider seems to work better than 200) I'm also noticing that Opties have sh*tty memory controllers.Quote:
Originally Posted by ugp
I have 2x FPBW's...which one to keep ? :)
http://www.gv2nix.com/OCF/146%20CABYE%200540FPBW-b.jpg
http://www.gv2nix.com/OCF/146%20CABYE%200540FPBW-a.jpg
currently i'm using "206" but with bad cooler as 7000B-ALCU i'm getting up to damn 60°c at 3.0 and 1.525v :( LOAD.
But can you overclock further?. The temp sensor on the Neo2 seems to respond more to power usage then temperature :stick:.Quote:
Originally Posted by ridikolous
TEDY :
why not try them both and see which one performs best and gives you the better temps?
@ TEDY: I'm interested in the one you arent going to keep ;)
I'm too lazy :D
lol :nono:Quote:
Originally Posted by TEDY