add this stepping
Chip: Venice 3000+ LBBLE 0517APNW @ 2772MHz - 1.65V -> Water
Mobo: Dfi Lf nf4 ULTRA-D @SLI-D
Ram: Twinmos SP 2 x 512 2-2-2-6 @250MHz
Stable: 9 x 308 = 2.72 GHz
reaches: 9 x 315 = 2.83 GHz
Printable View
add this stepping
Chip: Venice 3000+ LBBLE 0517APNW @ 2772MHz - 1.65V -> Water
Mobo: Dfi Lf nf4 ULTRA-D @SLI-D
Ram: Twinmos SP 2 x 512 2-2-2-6 @250MHz
Stable: 9 x 308 = 2.72 GHz
reaches: 9 x 315 = 2.83 GHz
i think this chip got potential for more ocing. it's weird that i can run superpi 32M at 2850Mhz, but i can't play game or anything else. folding at 2850Mhz didn't last long either. i wonder if it's the memories that's holding me back. i just got these 2 sticks of dual channel ocz pc3200 rev. 2 plat. i'm using dfi bios 510-3fix. i have no idea what memory chips are on the sticks, so i can't use the proper bios. i'm assuming it's tccd chips. another thing is, i can run memtest at 280 and 285 with 1:1 mem timing, but windows doesn't like 1:1 timing and i have to use divider :(.
what cooling ?Quote:
Originally Posted by Dani
Here's a suicideshot with my venice.
IHS was removed because load temps were way to high (49-50° load, while 30-31° idle). Guess that the IHS didn't make good contact with the core.
Anyway, here's the screenie (just a 1M run, 32M would crash to the desktop after 2 minutes).
http://users.skynet.be/MetalHead/300...031superpi.png
http://users.skynet.be/MetalHead/300...validation.png
VapoQuote:
Originally Posted by TEDY
here is my new venice 0517dpmw :banana:
http://img129.imageshack.us/img129/7...dpmw2zk.th.jpg
anyone here running ocz pc3200 rev. 2 platinum dual channel 2x512MB on a dfi lanparty sli-dr and 3200 venice? i have this setup and my venice can oc pretty well. the problem i'm having is that the ocz mem can't run 270-290 htt with 1:1 sync with 1T timing. any ideas? if someone has a similar setup, please let me know. thanks in advance.
Had exactly the same problems dng29 with my 3200 0520 BPMW using bios 704-3, try disabling dynamic counter and tweak other ram settings
I ended up changing to 702-1 and much better now though I am sure you can fix the problem with ram tweaks but I have not got the perfect settings yet but sooooon :)
my 3200 venice is a week 19 with this code lbble 0519bpew. so far i can boot into winxp at 2900Mhz on an xp-120 on my dfi board. i can run superpi 1M fine, but that's about it. with 2850Mhz, i can pass 32M superpi and that's about it too. 2800Mhz is stable for gaming and folding and anything i throw at it. all these speeds were ran on a mem divider. i rather run 1:1 sync than async. I'd tried several bioses like 510-1fix, 510-2fix, 510-3fix, 704-3, and 510-3. none of these bioses will let me run 1:1 sync with htt at 270, 275, 280, 285 or 290 :(. i'll give 704-1 a try. i'm sure the chips on these sticks of ocz are tccd, but i'm tempted to take out the heatspreader and void the freaking warranty.
Have you ever seen a ybble 3000+/3200+ Venice?
i have not seen a ybble code, but i would like to see oc results. get cranking my good man :). have fun, good luck and hope it will oc like a rocket.
I just found one check out this post
http://www.xtremesystems.org/forums/...ighlight=ybble
Thx ;)Quote:
Originally Posted by njkid32
I have seen two ybble and they seem bad (max 2400 mhz), but that seems good.
Now I confront step...
can you give us a screenshot dng29 with you week 19 @ 2900 ?? with all the relevent settings like mine below, I have not tried 2900 yet but will soon, also I am running sync with the 702-1 :D
http://img215.imageshack.us/img215/5...0finish7ve.jpg
i'm at work right now, but i'll update you with my screenshots and settings. 2900Mhz is not 100% stable for me. 2850Mhz is somewhat stable since i can fold for hours. right now the pc is doing cpu burn-in and the room is freaking hot 28+ degree C :(.Quote:
Originally Posted by alpha0ne
Thanks m8
Heres a shot I thought I would never see, 2800 at last, with more to come
http://img68.echo.cx/img68/8416/pi3228000eu.jpg
sorry this took so long, but here's my suicide shot at 2900Mhz. it's not 100% stable, but i can use firefox and do light work in winxp :).
http://img289.imageshack.us/my.php?i...suicide7we.jpg
sorry the picture doesn't look great. my first time using imageshack :).
Good Luck men.Quote:
Originally Posted by dng29
I use OCZ rev2 v1:1 (TCC5) and work well for me.
http://img157.echo.cx/img157/8484/1079696qd.jpg
:toast:
Quote:
Originally Posted by LANero
wow that's an awesome 3000 venice you got there :). it beats my 3200 venice. i have 2 sticks of that ocz rev.2 ver 1.1 TCC5 too :). how the heck did you get it to run at 317htt? is this 1:1 sync ratio or divider? i see you're using bios 510-1. could you show me your bios settings for memories please. again you got a really nice chip :). my ocz rev 2 TCC5 will go any higher than 270htt with 1:1 ratio.
got my venice 3000+, was a week 17 BPEW, from chiefvalue. a low spinning fan on it. stock volts on CPU, 2.6Vimm, this is what i got:
ran prime for 7 hours, no screenie, i was too pissed on my keyboard for typing 2 letters instead of 1, rebooted the pc, hoping i won't have to find a store open on sunday, was wrong :(
- ram is TCCX, ramguy said.Code:Submitted by DyJohnnY
Submitted on Sat, 09 Jul 2005 22:04:45 +0200 with CPU-Z 1.29
CPU : AMD Athlon 64 3000+ (*1)
CPU PSN : AMD Athlon(tm) 64 Processor 3000+
CPU EXT : MMX (+) 3DNow! (+) SSE SSE2 SSE3 x86-64
CPU Cache : L1 : 64/64 KB - L2 : 512 KB
Core : Venice (0.09) / 0xFF0 / E3
Freq : 2519.78 MHz (279.98 * 9)
----------------------------------
MB Brand :
MB Model : nForce
NB : nVidia nForce3 250 rev A1
SB : nVidia nForce3 MCP rev A2
----------------------------------
RAM Size : 1024 MB
RAM Freq : 280 MHz
RAM Type : DDR-SDRAM Dual Channel
RAM Ratio : CPU/9
RAM Timings : 2.5-4-4-8
----------------------------------
Slot 1 : 512MB (PC3200)
Slot 1 Manufacturer : Corsair
Slot 2 : 512MB (PC3200)
Slot 2 Manufacturer : Corsair
won't push it any further cuz i'm happy with it at 50degrees on load and i'm not into OC for the sport.
Hello.Quote:
Originally Posted by dng29
for 320HTT 1:1
BIOS: 510-1
RAM: OCZ Plat. Rev2 (TCC5)
DRAM Frequency: 200MHz
CPC : Enabled
tCL : 2.5
tRCD: 4
tRAS: 7
tRp : 3
tRC : 14
tRFC: 16
tRRD : 3
tWR : 3
tWTR : 2
tRWT : 3
tREF : 3072
tWCL : 01
Dram Bank Interleave: Enabled
DQS Skew Control : Auto
DQS Skew Value : 255
DRAM Drive Strength : Lvl 8
Dram Data Drive Strength: Auto
Max Async Latency : 8
Read Preamble Time : Normal
Read Preamble Time : 5
Idle Cycle Limit :256
Dynamic Counter: Enabled
R/W Queue Bypass : 16x
Bypass Max: 7x
32 Byte Granulation: Disable
Ram @ 320mhz
CnQ off
LTD 3x
LTD Voltage : 1.3 V
Chipset Voltage : 1.6V
Ram Voltaje: 2.8V
I hope that this can help it. Also I recommend to read this post:
http://i4memory.com/showthread.php?t=327
Until Soon
Quote:
Originally Posted by LANero
wow i didn't know that TCC5 can run at that high speed with 1:1 ratio sync. thanks for the setting. i'll try it on mine and see if my memories will like it. thanks for the link too.
Keep in mind not all ram sticks are created equal ;)
But thanks for the settings Lanero, if my ram works that high i could cast off my 166 divider and say hello to bandwidth :)
Alrighty. I received a 3500+ CBBLE 0512 DPAW yesterday. So far so good. I can pass 8M Super Pi up to 2.9ghz (290x10 1.55v) If it passes 8M then it will do everything I need without a hiccup. 32m is just to damn long!;)
I can get a suicide shot at 3ghz but I can't do much other than browse. Not to bad for a second hand cpu that I bought here for a great price!!! I have only had one other 2.8ghz+ cpu and it was a 3500+ claw that ran to damn hot. I am psyched to finally get a low voltage cool running 2.9ghz cpu!;) :toast:
There is no problem.
It is the configuration that better result has given me, can not reach results such but I believe that it can help to improve a little.
It is a pleasure to be able to help.
Until soon friends