http://www.thelab.gr/images/Hipro5/M...Silver_jpg.jpg
http://www.thelab.gr/images/Hipro5/M..._Black_jpg.jpg
http://www.thelab.gr/images/Hipro5/M..._Black_jpg.jpg
.
Nice, i like the last pic, the black front with blue leds :toast:
Look's great ! :banana:
When will it be available ?
Looks very nice! Almost want one, but my proc won't overclock much, so I guess I won't gain much with it. But it sure looks very good!
George, can you confirm what is the full voltage scale the DDR maximizer can output? I have a plan to use one of these units for graphics cards etc as well as the usual so will be requiring low volts/high current, are you able to give out that information atm?
PS
Is the VTT output is just a 50% tap of the main DDR ouput,or as I suspect, are you are running it off its own FET? if so, can you rate it's output too please :D
John
1.63V - 2.85V as for DDR2 and DDR3 and 2.8V - 4.22V as for DDR1......Quote:
Originally Posted by Johnny Bravo
125Watts output with a pick of 160Watts......
VTT output = 1/2 Vdimm and 40Watts max output......running on it's own fet....
Almost there.........Some details to be done and it'll be out.....:)Quote:
Originally Posted by joe_cool
That are some cray numbers! I like it! :D
Nice work George.We're waiting..:clap:
Quote:
Originally Posted by hipro5
Cheers mate, def should be worthwhile investment once you sort out the "little details" can't wait to try it out against my own circuits :up:
John
Hi George,
The years have now rolled by & i'm now sat here with a 1KW PC P&C Quad SLI PSU & a DFI nF4 SLI DR Expert board. I really need to know if there is still any need for your Maximiser on a System like this. That is of course, if it is ok with this Mobo.
I havn't read this thread for such a long time & the page count appears to be soaring. Really sorry for the amount of BS you have had to encompass in a vain effort to release your product to the Public. :(
Hope you are well tho & life is good for ya....Best wishes as always! :)
will this allow me to raise my ram voltages higher? cos my ASUS board tops out at 3.0V. it looks soo gd.how much? me naqd few of my mates here wud definately be interested in em. if it helps my clocks then i will buy.:):):):):):)
@Kin_Hell:
I doubt that any unmodded board available today will deliever as clean power to your RAMs as the Maximizer will. I dare to assume that it should help at least a bit on any board. The more extreme the overlock, the more it should help.
@cromwello:
Yes it will allow you to up the memory voltage to higher values than the ones available in BIOS, as long as your board is compatible.
With some Infineon rev. C-IC's performing excellent at voltages below 2.5V, the question rises: can the maximiser deliver that too? :)
1.63V - 4.22V :)Quote:
Originally Posted by PowerToTheUsers
I love it I know I definately want atleast one :DQuote:
Originally Posted by hipro5
Been looking forward to this... hopefully we can bring some into Malaysia ;)
:O omg.. what a piece of art..
an awesome job :D
[QUOTE=celemine1Gig]@Kin_Hell:
I doubt that any unmodded board available today will deliever as clean power to your RAMs as the Maximizer will. I dare to assume that it should help at least a bit on any board. The more extreme the overlock, the more it should help.
I was actually hoping for a response from George, but he would apparantly have no comments to make or he missed my question! :stick:
Thanks a lot you guys for your kind words.....:)
@ Kin_Hell.....yes you might need it as well.....a. You will not force your mobo to suplly that much power for your Rams - thas more colder mobo - b. You will not encode any "cold boot problems" as for the Rams coz mobo when firstly power up(not at reboot), it feeds the Ram modules with less voltage and afterwords with the voltage you have picked through bios....It won't start up some times due to this.....If you have BH-6/5 or UTT with 3.5Volts or so, you'll remember me.......;) c. You can change ON THE FLY the Ram voltage within Windows..... ;) and some more things too......:)
LOL... Nice work man. Love the CE mark.
Quote:
Originally Posted by hipro5
many times you can't boot with more than 3.75-3.8V on windows. That problem was solved when we used hipro5s BH6 @ 292MHz with 3.93V. We booted with 3.6 and raised voltage inside windows ;)
Wicked Sick! :banana:Quote:
Originally Posted by esdee
This is mine.....Though the mainboard of it, is a BETA one......:)
http://www.thelab.gr/images/Hipro5/Temp/DDRmine1.jpg
http://www.thelab.gr/images/Hipro5/Temp/DDRmine2.jpg
Hipro WOW..............