Intel 4.5GHz & 5GHz LinX Stable Club

Printable View

Show 100 post(s) from this thread on one page

10-22-2010, 07:04 AM
zalbard

Quote:

Originally Posted by miahallen

Zalbard...the OP still incorrectly lists my 2nd entry as 2C 2T ;)

I blame Copy-Paste! :yepp:
Fixed.

Edit: 1000th post of the thread! :D
10-23-2010, 07:52 AM
0Ro!

4,5G done on air, ambient temp 23c

http://img19.imageshack.us/img19/5757/45gstable.th.jpg

batch #L938B402
10-23-2010, 04:01 PM
dr_dx

Gigabyte X58A-UD7rev2 4.65Ghz 100GFlops

4.65Ghz on above dew point water - Xeon W3680 Batch# 3013A739

My goal was to reach 100GFlops.

http://valid.canardpc.com/cache/banner/1445387.png

http://i176.photobucket.com/albums/w...x/465alinx.jpg

Here's a template:

Code:

GIGABYTE GA-X58A-UD7 rev2 MB Intelligent Tweaker(M.I.T.) > Advanced Frequency Settings [Press Enter] CPU Clock Ratio............................: 30 CPU Frequency ........................(GHz): 4.65 > Advanced CPU Core Features [Press Enter] Intel(R) Turbo Boost Tech..................: Disabled CPU Cores Enabled..........................: All CPU Multi Threading........................: Disabled CPU Enhanced Halt (C1E)....................: Disabled C3/C6/C7 State Support.....................: Disabled CPU Thermal Monitor........................: Disabled CPU EIST Function..........................: Disabled Bi-Directional PROCHOT.....................: Disabled QPI Clock Ratio............................: x36 QPI Link Speed........................(GHz): 5.58 Uncore Clock Ratio.........................: x21 Uncore Frequency......................(MHz): 3255 >>>>> Standard Clock Control Base Clock(BCLK) Control...................: Enabled BCLK Frequency(MHz)........................: 155 Extreme Memory Profile(X.M.P.).............: Disabled System Memory Multiplier (SPD).............: 12 Memory Frequency(MHz)......................: 1860 PCI Express Frequency(MHz).................: 100 >>>>> Advanced Clock Control CPU Clock Drive (mV).......................: 800 PCI Express Clock Drive (mV)...............: 900 CPU Clock Skew (ps)........................: 0 IOH Clock Skew (ps)........................: 0 > Advanced Memory Settings [Press Enter] Extreme Memory Profile(X.M.P.).............: Disabled System Memory Multiplier (SPD).............: 12 Memory Frequency(MHz)......................: 1860 Performance Enhance........................: Standard DRAM Timing Selectable (SPD)...............: Quick Profile DDR Voltage........................: 1.5 Profile QPI Voltage........................: 1.175 Channel Interleaving.......................: 6 Rank Interleaving..........................: 4 >>>>> Channel A, B, & C > Channel A, B, & C Timing Settings [Press Enter] >>>>> Channel A, B, & C Standard Timing Control Cas Latency Time...........................: 8 tRCD.......................................: 8 tRP........................................: 8 tRAS.......................................: 22 >>>>> Channel A, B, & C Advanced Timing Control tRC........................................: Auto tRRD ......................................: Auto tWTR ......................................: Auto tWR........................................: Auto tWTP.......................................: Auto tWL........................................: Auto tRFC.......................................: 80 tRTP.......................................: Auto tFAW.......................................: Auto Command Rate (CMD) ........................: 1 >>>>> Channel A, B, & C Misc Timing Control B2B CAS Delay..............................: - Round Trip Latency.........................: Auto > Channel A, B, & C Turnaround Setting [Press Enter] >>>>> Channel A, B, & C Reads Followed By Reads Different DIMMs............................: Auto Different Ranks............................: Auto On The Same Rank...........................: Auto >>>>> Channel A, B, & C Writes Followed By Writes Different DIMMs............................: Auto Different Ranks............................: Auto On The Same Rank...........................: Auto > Advanced Voltage Settings [Press Enter] >>> CPU LoadLine Calibration.......................: L2 CPU Vcore..................................: 1.5375 xDynamic Vcore(DVID).......................: 0 QPI/VTT Voltage............................: 1.415 CPU PLL....................................: 1.4 >>> MCH/ICH PCIE.......................................: Auto [1.5] QPI PLL....................................: Auto [1.1] IOH Core...................................: Normal [1.1] ICH I/O....................................: Auto [1.5] ICH Core...................................: Auto [1.1] >>> Dram DRAM Voltage...............................: 1.66 DRAM Termination...........................: .75 Ch-A Data VRef.............................: .75 Ch-B Data VRef.............................: .75 Ch-C Data VRef.............................: .75 Ch-A Address VRef..........................: .75 Ch-B Address VRef..........................: .75 Ch-C Address VRef..........................: .75 > Miscellaneous Settings [Press Enter] Isochronous Support........................: Enabled Virtualization Technology..................: Disabled GOOC 2010 WWF Rev.2 Settings Only GOOC Lean Mode.............................: On GOOC extreme clock.........................: Enabled GOOC extreme temp..........................: Disabled
10-24-2010, 06:43 AM
radaja

heres my newest cpu.it does 4502 w/1.32v in xp but win7 x64 required
a bump in vcore from 1.362v to 1.368v in bios.1.34v load is still awesome:D

i7-920 #3849B018
Gigabyte X58A-UD5
custom water w/AC

4.5GHz HT on 1.34v
http://valid.canardpc.com/show_oc.php?id=1446295

4502 HT on DDR3-1715 9-9-9-24 1t
20 run LinX 42m Prime95 Blend
http://i51.tinypic.com/t0t5yu.jpg
http://i54.tinypic.com/2lsbfaw.jpg
10-24-2010, 07:15 AM
zalbard

Good job, everyone! :up:
Congrats on your golden batch chip, radaja! Took you a while to get one, eh? :D
10-24-2010, 07:17 AM
kup

Where on earth did you find a batch like that?! :D I'd have thought they'd all be long gone by now...
10-24-2010, 08:36 AM
radaja

Quote:

Originally Posted by zalbard

Good job, everyone! :up:
Congrats on your golden batch chip, radaja! Took you a while to get one, eh? :D

Thanks
well this is my fourth golden 920,and ive been trying to match my first one ever since i sold it.
it was another 3849B018 and i sold it only after playing with it for about 2 weeks and i didnt know
much about i7's then.it was and still is the best one for low volts ive seen.this one is close but still not the same:D

Quote:

Originally Posted by kup

Where on earth did you find a batch like that?! :D I'd have thought they'd all be long gone by now...

i got it from someone at ocn who is also a great wellknown XS's member:up:
10-24-2010, 10:38 AM
angelreaper

Batch# 3013A652 Core i7 970. Cooling Thermalright Silver Arrow.

http://img839.imageshack.us/img839/8462/linx451000.jpg

http://img837.imageshack.us/img837/1...validate01.jpg
http://valid.canardpc.com/show_oc.php?id=1444923
http://img822.imageshack.us/img822/4...pi5ghz1000.jpg
http://img213.imageshack.us/img213/7...ench121000.jpg

Thermalright Silver Arrow and Intel I7 970 5ghz
10-24-2010, 11:10 AM
Church

5GHz on air?! That's nuts :D
10-24-2010, 11:51 AM
miahallen

Quote:

Originally Posted by angelreaper

Batch# 3013A652 Core i7 970. Cooling Thermalright Silver Arrow.

Nice :up:

WAY better than my 970 :(
10-24-2010, 12:26 PM
dr_dx

Zalbard.....my cpu is a W3680 and what do I have to do to get past The Nemisis?
10-24-2010, 04:07 PM
zalbard

Quote:

Originally Posted by dr_dx

Zalbard.....my cpu is a W3680 and what do I have to do to get past The Nemisis?

Fixed both... my bad. Will add the new submissions tomorrow once I am properly awake. :)
10-24-2010, 10:32 PM
dr_dx

Quote:

Originally Posted by zalbard

Fixed both... my bad. Will add the new submissions tomorrow once I am properly awake. :)

Thanks! And Thanks for taking great care of this thread!

Dr_DX
10-24-2010, 11:23 PM
dr_dx

Here's a look at Linx 100 GFlops @ 4.6Ghz

Trying to find the minimum proc speed while still hitting 100 GFlops stable in Linx.

http://i176.photobucket.com/albums/w...x100GFlops.jpg
10-25-2010, 01:14 PM
miahallen

Quote:

Originally Posted by dr_dx

Trying to find the minimum proc speed while still hitting 100 GFlops stable in Linx.

Hummm....are you running with the latest binaries (look in the OP)...I was trying to hit 100Gflops last night, and was a little short at 5GHz :confused:
10-25-2010, 04:33 PM
Dekara

My 1year old result :)

Dekara | C2D E8600 [2C] @ 4510MHz | 1.312 | DFI P45-T2RS Plus | Air | Q820A606

http://img8.imageshack.us/img8/6276/...1vlinxx.th.jpg
10-25-2010, 06:40 PM
dr_dx

Quote:

Originally Posted by miahallen

Hummm....are you running with the latest binaries (look in the OP)...I was trying to hit 100Gflops last night, and was a little short at 5GHz :confused:

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.
10-26-2010, 12:43 AM
C-N

Gigabyte GA-X58-UD3R Rev 2

Here's my entry....

Gigabyte GA-X58-UD3R Rev 2
Intel i7 950 FPO/Batch 3020A998
3 x 1GB OCZ Platinum PC3-12800 CL7
OCZ GameXStream1010W PSU
Prolimatech Megahalems RevB 1 x NMB-Mat 120mm Fan
2 x HD3870X2

http://i106.photobucket.com/albums/m...R1960CL81T.png
10-26-2010, 06:20 AM
SimpleTECH

Quote:

Originally Posted by dr_dx

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.

Replace linpack_xeon32 and xeon64 with those in this package (newer, 10.2.6.015).
10-26-2010, 07:35 AM
miahallen

Quote:

Originally Posted by dr_dx

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.

Weird....that's the same I was using :rofl:

Maybe because I was running single channel.....:shrug:

Oh well, nice work anyhow :yepp:
10-26-2010, 09:16 AM
dr_dx

Quote:

Originally Posted by miahallen

Weird....that's the same I was using :rofl:

Maybe because I was running single channel.....:shrug:

Oh well, nice work anyhow :yepp:

Speaking of nice work, I greatly appreciate your Gulftown guide - it was a tremendous help.:up::up:
10-26-2010, 11:41 AM
wiener007

Found a nice I7-950

wiener007 | Core i7 950 [4C 8T] @ 4519.7 MHz | 1.303 | Rampage III Extreme | Water | 3849B099

http://www.abload.de/thumb/4500-linxbfls.jpg
10-26-2010, 11:59 AM
DomagojX

wow, nice i7 950 :)
10-26-2010, 06:49 PM
miahallen

Quote:

Originally Posted by dr_dx

Speaking of nice work, I greatly appreciate your Gulftown guide - it was a tremendous help.:up::up:

Ah, good to hear :) You're welcome :up:
10-27-2010, 02:55 PM
nickless

Here is my 5-th "new" Xeon W3520 :D:
4C 8T
batch# - 3845A935@4567MHz
mobo - RIIIE
cooling - water: EK-Supreme HF, MCP355, Magicool Xtreme III
vcore @ 1.376V
http://img183.imageshack.us/img183/2...inx4567.th.jpg http://img51.imageshack.us/img51/958...x204567.th.jpg

Show 100 post(s) from this thread on one page