3 hrs done....
If any RF user wants my settings, all they have to do is request it.... probe shows some of the volts anyway.... I'm moving on....
http://www.hostthenpost.org/uploads/...4850190c20.jpg
Printable View
3 hrs done....
If any RF user wants my settings, all they have to do is request it.... probe shows some of the volts anyway.... I'm moving on....
http://www.hostthenpost.org/uploads/...4850190c20.jpg
Wow! Great... Will be there soon with my new CPU :)
Thanks for rapid answers...
Is the Q9650 worth the $50 premium over the Q9550?
depends on what motherboard and cooling you have....
I`m just curious to see how far I can play with the chip and got this after few reboot. http://valid.canardpc.com/show_oc.php?id=494446
I manage to boot into windows once at 5Ghz but forgot to do validation. Fail to do that again after that. :( Will try again this weekend.
Bad thing is I killed my 4850 when I drop a Maglite torchlight on it while poking around the motherboard.:rofl:
Water cooled...D-tek...Thermochill...etc...either DFI UT P45, EVGA 780i, or Foxconn ELA...the first and last with Volterra digital CPU VRD.
the q950 is probably worth it because with those p45s your gonna be able to hit 4.5 with luck
heres my latest, going to call it a night and wake up early and start doing some serious OCing.http://i41.tinypic.com/juixpj.jpg
Q9550 Quick 2hr P95 run... still priming...
http://www.hostthenpost.org/uploads/...869dbf62b3.jpg
very very nice zucker2k.thats just amazing,with 8gigs of ram.seeing what you can with 8GB,makes me want to take out my cellshocks and throw in my 8GB of g.skill 8800's.since im still unable to run high fsb with this 9650 and use the 5:6 divider.
Thanks, Radaja. A few things; I'm running a rather high vcore (should be around 1.50v for my C1 Q9550; the NBv is also high because of the 8GB ram with high fsb.Quote:
Originally Posted by radaja
how much higher does it need to be(vNB)using 8 gigs at 500fsb,or should i say if you were using say 2 gigs at 500fsb what would your vNB be at?and then with 8 gigs it would be.......?just curious as to what kinds of voltage increase would i need when i install my 8gigs?
For 8.5 x 500 FSB, and 8GB ram, I usually need 1.65v for the NB, with 4Gb (2x 2GB, around 1.59v). I just wanted to run everything a bit higher than normal as I'm not tweaking, but just trying to show what's possible with the hardware in my sig, 4 hard drives, and an optical drive; all connected. I don't have a bench station, this is my everyday system with regular OS (Vista x64 SPI).Quote:
Originally Posted by radaja
Edit: 3hrs done....
http://www.hostthenpost.org/uploads/...dab3c1c70e.jpg
4hrs done and small ffts cycle complete....
http://www.hostthenpost.org/uploads/...be2a93d178.jpg
That's one hot cpu :eek:
dang i thought i was pumpin alot :cool:
Lol, I've primed it to 1c of tjmax; tjmax is there for a reason. Good thing is, it's still running. :p:Quote:
Originally Posted by Celcius
this proc is great. Got myself one with a beatiful batch - now waiting for an appropriate rad to arrive and will post my results then. :D
Hopefully these screenshots are satisfactory enough :rolleyes:
9hrs done...
http://www.hostthenpost.org/uploads/...0b403d8c6b.jpg
Just to give an idea how stable the system is....
http://www.hostthenpost.org/uploads/...2d67857d03.jpg
12hrs+ complete....
http://www.hostthenpost.org/uploads/...93674d44ba.jpg
zucker2k awesome! im satisfied with two hours of prime,so i think you can can definetly call that stable!great OC.keep it up
sorry for the double post.well i got it to 506x8.5 4300 and i was able to lower some voltages.this is such an awesome proccessor.i mean its almost like im still OCing my E8500.its actually using less vcore to do 4300 than my e8500 EO needed for 4300.this board with the 9650 is just amazing.http://i44.tinypic.com/op31xu.jpg
Nice Clockes Zuckerman, you may be stable, but are you running that 24/7 ? cause with that much nb voltage you board aint going to last very long, i would never run over 1.6 nb 24/7,and your cpu seems on the rather toasty side to, but nice clocks anyway.
Crap, my q9650 won't pass the Intel Burn-in test even at stock settings... but prime95 is fine. I think the vdrop on my board is killing it.
this is where ill stop for now.im pretty happy with the performance im getting with this clock.gotta say these 9650's are beasts,i recommend that everyone should get one.http://i44.tinypic.com/167tbtw.jpghttp://i44.tinypic.com/2m2ffo0.jpg
Awesome Radaja. :up:Quote:
Originally Posted by radaja
nice clocks there gents. I will be getting my ud3p in tomorrow :up:
Been runnnin 3.9 ghz on an msi neo2 fr P-35 mobo for a couple o'
weeks now; I cant wait to put this 9650 on a ud3p for some real action.
Its 2 hours prime stable now @1.264 (cpuz,,idle) with 1.3?? volts bios.
I never liked the vdroop on this msi board. I want crazy clockZ with a ud3p.
I like how cool this thing runs with an old BigTyphoon though. My q6600 would really heat up @3.6. I got good ram TeamXtreem, GMH and a low vid chip (1.1000) so with some help from you guys I should be clockin-fine.
I have never posted a SS before; so just in case I have good luck I wanna post some screenies. What size should i make the SS? Or just post it as is?
Im running a desktop res of 1650X1050, Im thinking that i should reduce it to ???? Thanks for any help guys.