Printable View
Yep that is the down side.... covering variations etc etc. both by copyright and patent. You have to establish the core basis of the idea and effectively try to copyright the fundamental idea behind it rather than the item itself... which is why the lawyers make so much dosh!
This is a result of the collaboration between baker18 & bowman thru time.Quote:
It's really fascinating to watch this hardware evolve in Bowmans' very capable hands. The new swivel head is a simple but brilliant solution to an important problem.
I brought this issue up to bowman on the phone 3 days ago when we spoke and we discussed it at length.Quote:
It's already been proven that certain large companies monitor this thread and others in here for their R&D. I would not be at all surprised to see these innovations surface in upcoming releases of their product.
Thanks a lot bud.Quote:
well i promised some pics of a baker block modded prommie and here they are...
:D I totally will be. It's what I wanted from the start, just been kind of an evolutionary process, thanks to all bowman's work on this rig. I appreciate all the craftsmanship and agree with Dale that bowman is a craftsman when it comes to this...it's art to him. Baker's blocks are something else too, thanks "R".Quote:
Somebody will be very happy with his new toy...............
Thanks for pointing out Bakers role in this, I didn't realize I hadn't mentioned him. After all.....it's a Baker Block!
Thanks for the support guys.
I would also like to thank "Dagooch" for helping in the design of the new enclosure.
There are more stuff coming so stay tune( GPu enclosure, New CPU evap that can hold 200 watts and for the cascade guys, a custom heat exchanger).
thanks,
baker18
:thumbsup: Waiting patiently ...... :DQuote:
Originally posted by baker18
Thanks for the support guys.
I would also like to thank "Dagooch" for helping in the design of the new enclosure.
There are more stuff coming so stay tune( GPu enclosure, New CPU evap that can hold 200 watts and for the cascade guys, a custom heat exchanger).
thanks,
baker18
yea i dont do any of this for money..like alot of the guys..but hay if they can make a buck or 2, more power to them...:)
and yes i dale and I are close friends ...he knows if he needs something i will be there if needed..
i do like playing with new ideas...
bakers new stuff will be shown as soon as i see them...i like being the guinie pig..LOL:D
as baker and I spoke in lenght yesterday..there lots of new ideas him and DaGooch and working on..
i look forward to the new stuff as i want to get back on my dual evap prom in a alum case.
the 410 modded prom i have is working ok..it just needs a cap tube adjustment,which i need to start on.that in itself will take a while to work out..pressures are staying under 300 so far..but that may change...i have to install and wire a high side safety switch to be sure it is safe...
thats one thing i haven t seen anyone else do on there systems..no safety overides...there are lot of guys posting pics of there new toys...but we all need to consider the safety factor first. and design these with a possable hazzard in mind..
That's why you da man! :toast:Quote:
yea i dont do any of this for money
dito! :toast:Quote:
Originally posted by WxChaser
That's why you da man! :toast:
what does that cup on the evap is made from ?
looking so clean and sharp :D
well you guy proberly know i am waiting to do a reveiw on 2 units mach II gt and a vapo light speed..
but look what i have been playing with a new design...
this was a mach II...but it will be the first of its kind when i am finished....:D
differant view
one more
well incase no one knows..this will be a cpu/gpu evap cooler...in a factory case..with the largest compressor i could stuff in there and a larger condensor...
Very cool! That's what I been waiting to see. :thumbsup:
:toast:
Whoa mad!!
Excellent work, as always, Bowman. :toast:
Do you use old parts or new parts Bowman?
well these all all new componants i am using on this one.
i am waiting on some more baker blocks for the cpu and gpu and i will give it hoses and cap tubes.
it sets now under 200psi while i check for leaks and then i will pull a vacuum and set it aside untill the blocks come in..it will take some work because i am going to try and use the factory chip controller and wire this puppy up as nventiv would..so it should work like a factory mach II.only diff is i will have the factory lcd but also dual lcd evap readouts also.
Mr. Bowman is this the r410 powered unit??
I take it the pressure to be worried about is standing correct as pressure drops while running or an I mistaken here?
Looks very nice and a big jump from the nf9fx to that sc12 monster :)
How loud is that 12 compressor as compared to the 9?
They are preety quiet, im almost sure the fan bowman is using is louder...Quote:
Originally posted by TheDude
How loud is that 12 compressor as compared to the 9?
When can the reveiw be ready for posting ??Quote:
Originally posted by bowman1964
well you guy proberly know i am waiting to do a reveiw on 2 units mach II gt and a vapo light speed..
but look what i have been playing with a new design...
this was a mach II...but it will be the first of its kind when i am finished....:D
Due to the political fallout and the blowup Bowman is taking a breather, can only hope he posts that review somewhere :(
Thedude has more insight on this, just tread carefull
Anyone know how bowman shimmed opp's mach2 evaporator so it stuck out further and if this is a complex thing to do as I have a intel chip without a heat spreader that I would like to be able to use.
Thanks guys:)
File down the plastic on the bottom of the cpu bracket.