Got the board a few days ago and i have to say an absolute DFI name worthy product.
A b*tch to figure out the thing but once you have the absolute best choice for the extreem user !!:yepp:
This is what i achieved just now :)
http://img188.imagevenue.com/loc220/..._122_220lo.JPG
8x 475= 3800 Mhz Quad Core OCCT Stable :clap:
Does this board got Vdroop, and does the vdroop control works like on the P5K Deluxe, if it droop by how much from idle to load? And another thing, does this board overvolt the (RAM)DIMMs?
Well the bios offers an option for Vdroop control and it works as long as you put it at disabled ..... (disabled actualy enables it little bug :D )Quote:
Originally Posted by mc2k
aith nice:D hey, do you got this board? I see that u also from the Netherlands, where did u bought yours then, as I dont see any stores here sell them, except in Germany.Quote:
Originally Posted by SmokeyTheBandit
Thats right the board isn't available here atm.Quote:
Originally Posted by mc2k
Not a bug. VCORE Droop Control when set to enabled allows the voltage to vary under load as required be the Intel specification. When set to disabled there is no droop control. The board maintains the set voltage regardless of load.Quote:
Originally Posted by SmokeyTheBandit
Q6600 G0 Rev
1000 WATT PSU
DFI P35
HD2600XT GDR4
2X 512 MB 800MHZ dual Ram
Thermaltake bettle
PHASE CHANGE
Update : 4440 MHZ Validate: http://valid.x86-secret.com/show_oc.php?id=251160
4416 MHZ Validate: http://valid.x86-secret.com/show_oc.php?id=251102
3DMARK2006 4.2 GHZ CPU SCORE: 6281
http://www.resimekle.gen.tr/imagehos...s/AFN86751.jpg
4104 Mhz 4 Core Enable 1.7 volt 47c thermaltake bettle air.
http://www.resimekle.gen.tr/imagehos...s/pgG82320.jpg
4045 mhz 1.58 volt 34c 4core ENABLE AİR thermaltake bettle
http://www.resimekle.gen.tr/imagehos...s/JYF67062.jpg
1.58 volt 4152mhz 4 CORE ENABLE thermaltake bettle
http://www.resimekle.gen.tr/imagehos...s/zss67438.jpg
4300 MHZ 1.58 Volt PHASE CHANGE -25c 4 core ENABLE
http://www.resimekle.gen.tr/imagehos...s/5FK67626.jpg
4404 MHZ 1.84 Volt -25 c 4core ENABLE 1.84 VOLT
http://www.resimekle.gen.tr/imagehos...s/TPI67776.jpg
Super Pi 1M
http://www.resimekle.gen.tr/imagehos...s/GPn67957.jpg
Air 4008 mhz 1.57 Volt Ram timings 3-3-3-10 Frequency 445.4
Cpuz validate: http://valid.x86-secret.com/show_oc.php?id=251410
Great CPU speeds... crazy that the Super Pi does not reflect the speeds though...
Start to take confidence with the new CellShock and P35, just a fast 4M run:
http://www.pctuner.info/up/results/_...am6125-4-4.jpg
Not easy to find the best settings...
Now I'm working for 32M stable...
The CellShock is not an impossibility on this board. But to run them requires an excessive amount of board and memory voltage, unlikely to achieve 24/7 stability over 1100MHz and won't run 4-4-4 at 1200MHz which they easily do with other chipsets.
That's right:(Quote:
Originally Posted by Praz
Any comments on Team & Crucial?:confused:Quote:
Originally Posted by Praz
that is true.. when i did a short test last week i was able to take my cellshock's cl4 kit to 1206mhz (4-4-4-9) with 2.5v.. i don't know that would have they gone even higher.. my freaking psu died before i had a change to do some proper testing with em.. :shakes:Quote:
Originally Posted by Praz
Question....Ive never owned a DFI board is the Overclocking done strickly though the bios only or is there a windows based program with this board?:confused:
BIOS is where its at. DFI boards typically are not n00b friendly.
well you can use clockgen (that comes with the board) or use SetFsb prog.. personally i always overclock from the bios and fine tune from windows .Quote:
Originally Posted by Mr.Bones
Thanks m8 Ive got two boards scoped out this one and the Ip35 pro not sure witch one to go with.The items in my sig will be just to get me up and going until the new intel chips are out.;)Quote:
Originally Posted by Solarfall
when a system is unstable due to gtl settings is it normal for it to BSOD? my system is either 100% stable or BSOD's. prime doesnt fail first either, so it seems like i can only get one the extremes of the stability spectrum.
Any1 got some Crucial Ballistix running on this board, how are they doing in therms of overclocking ?
I have 4x1GB Ballistix Tracer 1066, havent got to OCing them yet though.
Probably super loose board strap to get CPU overclock?Quote:
Originally Posted by CyberDruid
What option is there in the bios to make your divider 1:1?
Quote:
Originally Posted by emoners
Run Ram @ 333/667 = 1:1 on 1333 Strap:up:
You making any head way on that Team Xtreem
well kinda suck tho, still wanna push it further but i'm only on air...this what i got highest & stable so far ;)Quote:
Originally Posted by Brother Esau
http://valid.x86-secret.com/show_oc.php?id=251490
http://i116.photobucket.com/albums/o...t457MHz2GB.jpg
Prime95 at 7hours & no errors...yet :rolleyes: