Printable View
Right now i'm trying to push 2.88 Ghz with 1.58-1.6 volts, CPUZ hovers around those readsings. It's been running for almost a half hour now, i'll update with how it ends, probably needs more volts to be fully stable at this speed... i'm guessing 1.65 volts would easily keep it stable at 2.9 Ghz though.
Yep, almost half an hour and failed. Needs more volts captain! But temps are getting too high. Planning to WC and then i can push 1.7 volts through this thing, that'd stabilize it pretty high.
It'd be nice if it was 24/7.....when I eventually get my comp up and running again I'm gonna keep going with some burn-in.....I'm 1M stable at 2.96GHz /w 1.600v and a Zalman 7700ALCU.....3GHz+ on h2O for sure...but I still wanna close on a 12-24hour Prime stable clock.Quote:
Originally Posted by Absolute_0
Cornelious, i'm about to do a WC system as my summer project. I'm hoping for 3 Ghz but my chip is not quite as good as yours. However, it loves volts and is very temperature bound, so hopefully a Storm G4 and 1.7 volts will make it happy :D
I was just wondering---I am at 2.9GHz on air and my temps never go over 45c if I was on water would it really make that much of a difference? I also wanted to know my stepping is LBBLE 0516GPBW and I dont see to many of these out there. Were these not that good cuz mine is doing really well or is it just luck of the draw..... I know I can do more than 3GHz but I dont want my temps to go over 50c under load. I live in Arizona and its hot as hell here so my house doesnt get cooler than 80. I tried moving my comp near an a/c vent and that helped a little.
What kind of voltage are you putting into that chip, njkid32? Those are pretty good temps. Try 1.6+ volts and see what your max CPU speed is, stable of course.
And about the water, if the AC helped then water certainly will. Water is most helpful for high voltage though, i just dont want to run 1.7V on air but with water its no problem and temps don't become insane.
Hey Absolute_0, I am running 1.65v to it right now. I have had it to 3GHz but I was afraid to put to many volts to it. I have put 1.75 and it didnt seem to like it though cuz it crashed right away. I was surprised with the Big Typhoon my temps under load didnt go over 45c. Like right now I am running a ton of stuff and its only at 34c. Not bad! I have been reading this thread from OC Forums and its pretty good. So it looks like I am going to go with this setup from www.DangerDen.com. Also have you seen much of my chip out there cuz I havent?
http://forums.extremeoverclocking.co...d.php?t=176597
Your chip is probably the best week 16 i've ever heard of.
I didn't know you were putting that many volts into it, but your temps are so low it seems safe to me.
Watercooling wouldn't hurt, 3 Ghz 24/7 is about as good as it gets.
yeah, tried it on different computers. Notice that the filesize of your file is 1.5k SMALLER than the size I posted. Curious, what are you using to compress?Quote:
Originally Posted by njkid32
Do you think that 1.65v is to much? I have it this way cuz I wasnt going to stop at 2.9GHz and to be honest I just havent lowered it. I know I can run at a lower volt so maybe I should I could run a little cooler.
Mr. Tinker Here is a new version of the zip file I was using winrar and trying to make it post but didnt want to post a .rar file so I changed it to .zip but now I did it with winzip so it should work just fine sorry!
edit: also if anyone knows--- should I put my ram in the yellow slots or the orange ones? I am currently in the orange ones but I have read that they have been killing some CH-5 sticks.
2810 @ 1.456v :toast: would be a dream come true for me on my new 3200 LBBLE 0520BPMWQuote:
Originally Posted by exscape
not installed yet but very soon and will post clocks then :)
i've done a bit of benching at 2.9GHz....waiting for water now
couple of suicide shots on air at 3003MHz:)
http://img74.imageshack.us/img74/1380/dsc018460lw.jpg
http://img74.imageshack.us/img74/5268/dsc018472vl.jpg
:slobber: http://img215.imageshack.us/img215/3562/dsc018521ks.jpg
Venice 0517 BPEW
10x280
Vcore 1.48V
Cooler Master Hyper6
http://img288.imageshack.us/img288/5...woot6qy.th.jpg
Venice 0520 APBW Nr. 2 cooled by Watercool
http://www.forumdeluxx.de/gallery/da...Prime95Nr1.JPG
Venice 0520 APBW Nr. 2 cooled by Watercool
http://www.forumdeluxx.de/gallery/da...Prime95Nr2.JPG
Venice 0516 GPCW cooled by Watercool
http://www.forumdeluxx.de/gallery/da...862800gpcw.JPG
i recieved a 3500+ LBBLE 0519DPHW anyone have any results on this one? wont be able to test till i recieve better memory.
Jen
Man I must have the worst week 17 made.
LBBLE 0517 GPIW does 2.6 with 1.6 volts prime stable on xp120
I'm at work and don't have my screenshot with me, but here are my results so far.
Chip: Venice 3000+ LBBLE 0517BPCW
Mobo: Dfi Lf nf4 ultra-d
Ram: Ocz Premier 2 x 512 dual channel
Stable: 9 x 290 = 2.61 ghz
reaches: 9 x 305 = 2.754 ghz
All of this is on stock cooling, so i don't think it is too bad. I'm pretty satisfied with the results :).
Mo
finally got a week 3200 venice. week 19, what a surprise. code is lbble 0519bpew. it's a retail chip. bought it locally, but couldn't handpick. 2800Mhz stable on air with an xp-120. vcore had to be pumped up to 1.6. also running on a divider :(. i just don't like divider. i'll figure out how to use imageshack and will post some pics.
I obtain results such. The 0519 that I have now, it seems not to want more than 2,8 ghz nor happening of 1.6V.Quote:
Originally Posted by dng29
a little update. 1M superpi passed at 2900Mhz with vcore at 1.7, yikes. 2M superpi failed after 10 tests :(. i probably need better cooling to be stable at higher speed :). might consider water cooling. i wonder if 3000Mhz is achievable for suicide shots :).
Wath cooling use?Quote:
Originally Posted by dng29
Thanks
Quote:
Originally Posted by LANero
just air cooling. waiting on the zalman cnps9500. i hope it's as good as water cooling. i wish i have money for water cooling :). 2900Mhz is not stable though, just 1M superpi pass. 2850Mhz is ok too, but not stable either. 2800Mhz is the best this thing can do. i think with better cooling it'll scale more.
Nice...
You has tried Burn-in a the CPU?
3200+ LBBLE 0517BPDW
anyone heard about these stepping ???
Quote:
Originally Posted by LANero
burn-in at 2800Mhz with folding overnight for like 7 hours. prime95 is not stable at all, failed at first iteration. gaming fine at 2800mhz. i'll try burn-in at 2850Mhz and more soon.
Here, it ok stepping :DQuote:
Originally Posted by TEDY