Printable View
Hi
Ive been getting some BSOD and some instability, and I think its because of my ram
When I first ran my system, it didnt set up my TCCD Corsair XLpro at stock (2,2,2,5)
They where more loose, so I forced 2,2,2,5
The BIOS I have right now is the "stock" one. havent flashed the board
From what I understand, there are several BIOS from DFI and moded by other people, and some work better with BH-5 and others work better with TCCD
Whats the newest and best BIOS for TCCD ram at CAS 2?
Try 510-2 fix. They're supposedly not TCCD but they work awesome on my TCCD.
Hey
I have been OC'ing my 3000+, but have run into a FSB wall. I can't get my mobo stable over 350 FSB, which is cind of a problem, when i think the CPU has a lot more to offer :D I have tried mounting a 9800 pro cooler, instead of the retail one, but it only lower the temp around 5 C, and gave me 5 FSB more. Though i have been able to get to 367 FSB (3,3 GHz) (very unstable) but using a 120 mm fan, to cool down the chipset.
Have anyone got suggestion to how I can get some more MHz out of my mobo?? Besides LN2 :rolleyes:
My chipset fan has started making weird "clicking" sounds really loud as soon as it goes over 5600 rpm, this never happened before ( I think, the summer is here and it's really, really warm ). As a result of this I've had to jack it into my fancontroller and regulate the speed to 5500rpm. Anyone know what I can do to fix this?
I just got that board (nf4 Ultra-D) and seems great atm (compared to my nf3 Ultra-D)
What is LDT bus voltage (stock @ 1.2v bios / 1.16v @ smartguardian)
If I increase the ldt voltage, my setup could overclock better ? :confused:
Hi Guys,
maybe u can give me some hints to get a higher HTT, because currently i am stuck at HTT290. :mad:
For me this prob. is very strange, because i can boot & bench @290x11
but it wont boot @HTT300x10 :confused:
After the post screen it seems that i get a probl. with the Graphicard, currently using a X700 because iam waiting for the R520. Could this be a reason ?
DFI-NF4 - Ultra D Bios 704-2
SD 4000+ @ 3,2Ghz @ 1,75 Vcore
Corsair 3200 Rev 1.1 @ 3,5 Vdimm
1,8 VDD
Cooled by Vapo LS
Some ideas guys ? many thx
Maybe I should shut up while beïng stuck at 2700Mhz (270*10 or 300*9) on water with the X2... Cores seem to be limited to 2750Mhz... 1.65Volt (more volt doesn't seem to do any good on this watercooling)...
But if graphics fails...
LDT too high? (But I guess you already switched back to x3)
PCI-e lock not working? Maybe try setting 101 or more Mhz (I thought ATi didn't mind PCI-e freq as much as nVidia)
hmm... i asume that the probl. is from the graphics but i cannot identify exact.Quote:
Originally Posted by OneyedK
LDT is already set to x3,
PCI-e tried to 101 and also tried 105 as mentioned in the DFI-Street Forum, but both does not help.
Its strange that i can bench with 290x11 and that i get a no go within 300x10 :confused:
Some CPUs like other mulitpliers than others it seems...they are weird as hell...I am sitting on 250x10.0 fine right now and I am happy with it as my 24/7 clock.
Quote:
Originally Posted by BioBlade
dude i had the same problem, for me was the cold boot problem try switching with different memories then maybe your problem will be solved
are you guys increasing the LDT and chipset voltage ?? or leaving them at stock voltages ?
:D Only a bit - no need for more..........:Quote:
Originally Posted by jetjaguar
http://img282.echo.cx/img282/4077/362ghz6se.jpg
:toast:
For me it doesn't really do anything, So far I've tested my board up to 363mhz htt and its all the same wheter I use stock LDT/Chipset voltage or I increase it, it makes no difference. HARDCORECLOCKER, does it make a difference for you? I'm imterested in knowing how so?
http://img50.imageshack.us/img50/4553/bugged1ls.jpg
I don't have freaky BH-5 that will do anything close to 300. CPU-Z is picking up some bad info from the bios. Does anyone know if this bug is fixxed in any bios after the 414-2 that I am currently running.
Is the stock hsf for the chipset good enough or would an aftermarket solution help?
i heard putting as5 on there helps a bit .. the problem is there is no room with 7800gtxs or any sli setupQuote:
Originally Posted by urbanfox
That is the only design of the motherboard I do not like...that SLI covers almost all air-flow to the chipset.Quote:
Originally Posted by jetjaguar
Which memory ratio are you running at gun? And have you tried CBI as well?Quote:
Originally Posted by gundamit
Maybe some of your silly has rubbed off on your puter :p:
Thats a 7:10 or 140fsb divider. All multis show 1:1 ratio on the memory speed.Quote:
Originally Posted by EMC2
CBI? :confused: Whats' that?Quote:
Originally Posted by EMC2
But I wore a condom! :rolleyes: I guess its possible. ;)Quote:
Originally Posted by EMC2
Edit: Oh Yeah! CBI = Central Brain Identifier Its been a while since I used it but I'll give it a try. I'm guessing no difference. Even memtest sees the same memory speed.
Hi,
Next week I will get DFI LANPARTY UT nF4 SLI-DR with:
- 3000+ Venice
- OCZ 520W PowerStream
- OCZ PC3200 TCC5, got em already
My question is will powerstream be able to handle my systems stably? I heard it is better to plug 20pin atx connector from psu into 24pin mobo's atx connector. Is that true or I will be fine with with 24pin adaptor. I will run single Nvidia 6600GT graphics card. Thanks
Look in here since you have a Venice and grab the modded 704 BIOS ;)Quote:
Originally Posted by gundamit
Silliness can penetrate anything tho :p:Quote:
But I wore a condom! :worm: I guess its possible. ;)
If Memtest sees the same thing, then everything else will too... try the BIOS.Quote:
I'm guessing no difference. Even memtest sees the same memory speed.
What BIOS should I use on DFI NF4-Ultra + 3700 + OCZ VX PC4000 ?
I can't get 1t to work with a divider with 2x512 UTT.
After a LOT of work I've gotten 1t running stable in the yellow slots (1t is 100% unstable at any settings in orange slots) with bios 5-10 -2fix and 7-2 -2fix @ 250 2-2-2-5-7-16-2-2-2-1854-1-e-7.0-d-5.5-d-16x-7x-d with 3.5vcore
Anyone know why it wont work with dividers on? (test 8 errors like a mofo)
Also, is there any way I can get my orange slots to run 1t? They clock much better on much less voltage than the yellows.
using the 623-3 bios here with my rig, but something is odd.......cpu wont go very high....stuck 245FSb.....something i didnt think of or tried is the startup VID value ...do you ppl change that when oc'ing?????
Fragman, it depends on how much are you oc'ing...
Maybe just with a VID + x% change is enough for that. Got a Venice 3200+ @ Startup Auto but VID * 110%, getting 1.52V ...that's fair enough for 2700 MHz (300x9 or 270x10) 101% stable.
Btw, I'm using 623-1.