Printable View
Welkome to Extreme TrollQuote:
Originally posted by Troll
Hi all
Interesting article concerning the question of timings (2-2-2-11):
http://www.madshrimps.be/?action=getarticle&articID=133
my shuttle AN50R only allows 1.7V Vcore... so im restricted to 2360MHz with Zalman 7000A-Cu, even with LDT-Speed set to 2.5 or 2 (boots into Windows with 2500, but reboots immediately) - have to mod... :rolleyes:
Yes give a little more volt, then you might see 2500:toast:
Tweaked XP a little:Quote:
Originally posted by cpulloverclock
[B]WOWWWWWWWWWWWWWWWWWWWWWWWWWWWWW
very good and Awesomeeeeeeeeeeee Tom
406 is the WR and for SuperPi the same time
YOU ARE THE BEST
:toast: :eek: :eek: :eek: :eek: :banana: :banana: :slobber: :slobber: :slobber:
U can send ur 8M here : yok@mx.biwa.ne.jp
the link http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
Now 5:03
:banana:
well 42.38 is my best so far, the cpu will go higher but the ram needs more voltage to run higher than 265mhz 1:1... Im already putting 3.44v in it so im not sure if im going to try more or not..
thought i would contribute to this thread:)
and one more.
Awesome scores QD. :toast:
-17C load, cooled by modded prommie at its max. Someone donate a cascade cooling solution, please:D
Thanks, H.
Nice results QD:toast:
may be tough to beat with that via board, i guess i should try and run some with high fsb using 5:4... Im new to the hexus pifast bench so i dont know if that would help or notQuote:
Originally posted by MickeyMouse
damam you all I have to take down CCC tommorow I just have 2 :)
Great scores there Quad:)
ahh, sweet:) , i may have to wait on the kingston ram to be delivered for the 270 1:1... i know my chip is stable at 271mhz so i can do that for sure... I think 271 is going to be my limit though unless i can get it colder...Quote:
Originally posted by MickeyMouse
sat I had a shuttle #2 delivered my man ;) so 270 1:1 now is a joke for me and my ram ;)
quad very nice also "AS ALWAYS"
get you an XT and we can all battle it out to the top:D , hopefully be able to get up there with the rest of Team Puss once i get my vga chiller(hopefully in 2 weeks):)
VERY NICE:D , what vdimm for 276 1:1??? your using the kingston right???
just got your PM, i guess its safe to assume you have the vdimm mod working now??
awesome scores Jason "AS ALWAYS":D
Looks like these 3400+'s are very powerful. wouldn't be surprised to see one of those taking down an FX-51, it's just a matter of having some -50C or better cooling. The problem with FX board is that they can't do better than 295FSB 6:5 and even that is not stable enough for 3D run... i wouldn't mind having a board that can do 320fsb+ with ram at 260-270mhz at most aggressive timeings plus over 3Ghz total mhz.
btw, this Corsair "RE" registered ram can do 270mhz easy even though it's 2x512 and it's ECC:)
http://www.xs4all.nl/~jvlk/43.63.JPG
Sold the 3200+ and Gigapos mobo with his overvolt protection:mad:
The chip seems to be maxed out..also removed heatspreader but that helped nothing..it seems to hit a brick wall at 2880:confused:
Oh well:)
Going for a 3400+ and shuttle next week:toast:
look at your volts, you need 2.0V+ but then your cooling will prolly be at its max. i would say 50mhz+ is possible at slightly higher v-core.
I could also bench at that speed with 1.9v on chipQuote:
Originally posted by QuadDamage
look at your volts, you need 2.0V+ but then your cooling will prolly be at its max. i would say 50mhz+ is possible at slightly higher v-core.
Temps were -58 full load on display..so i had some headroom left...but chip is already sold;)
just snuck in a little 41.66s in hexus_pifast, here is a screenie
Updated :)
awesome, thanks:D
Nice CCC
Thats nr 3:toast:
So Tom, how can i get my score uploaded? that would be number 3 i guess.
Yes;) 40.67 --nice, close to JCViggen, but he said he don't bench anymore :(Quote:
Originally posted by QuadDamage
So Tom, how can i get my score uploaded? that would be number 3 i guess.
Fill out the opload form:
http://pifast.hexus.net/pifast.php?do=add_form&page=1
And then make a picture of the run here in this forum
I think you already done that here:
http://www.xtremesystems.org/forums/...216#post322216
PMM will upload then.:toast:
Alrighty Tom. Thanks my man.
Sorted Quad :)