-
-
The last, I remember very well, but growth that the date was 20/05/2010.
Another thing that happens is that with the Q9650 installed, the motherboard is silly, just shows the code C1-01-C1 -01 and so repeatedly, restart and start again with these codes ...
-
mm strange contact dfi support i guess...
-
One question.
This board should do something special to update the bios? reset it or give a clear CMOS before installing another processor?
Or just upgrade and go?
If the problem persists speak to the people of DFI.
-
Quote:
Originally Posted by
>D4L70N<
Hi, I've flashed the bios to the latter one vercion, but I have a problem, and that still does not recognize my Q9650 ...
It stays in the C1 code and a E4600 works perfectly ... ...:mad::mad::mad:
reflash bios they do corrupt sometimes
n make sure you reset cmos before you flash
-
Quote:
Originally Posted by
zsamz_
reflash bios they do corrupt sometimes
n make sure you reset cmos before you flash
Zsamz Hi, I've tested many of the BIOS, now have the latest beta bios, but there is no way to make it work with the Q9650 ...
I tried to jumpers, putting the manual 1333MHz FSB with jumpers but nothing ..
Bios may be corrupt? this motherboard is dual bios? Is there a way to jump to the second bios?
-
Quote:
Originally Posted by
>D4L70N<
Zsamz Hi, I've tested many of the BIOS, now have the latest beta bios, but there is no way to make it work with the Q9650 ...
I tried to jumpers, putting the manual 1333MHz FSB with jumpers but nothing ..
Bios may be corrupt? this motherboard is dual bios? Is there a way to jump to the second bios?
just reflash the bios
q9650 is old enough of a cpu that there must be a bios supporting it
you try another set of ram or 1 stick of ram
i seen some q9650 + ram combo that my rex didnt like
-
a Q9650 defenatly works i have seen alot of them on this bord.
-
Quote:
Originally Posted by
zsamz_
just reflash the bios
q9650 is old enough of a cpu that there must be a bios supporting it
you try another set of ram or 1 stick of ram
i seen some q9650 + ram combo that my rex didnt like
Hi, I tested with 1GB Crucial Ballistix module. (With the Q9650 installed)
http://images.crucial.com/images/res...pin_350x90.gif
The board seems to want to turn, but began to whistle, with constant short beeps.
I've been looking for information on the bios beeps awards and that kind of beeps means:
Constant short-Tone: The motherboard is faulty, ie it is broken is the worst thing that can happen.
But I do not understand how you can work with the E4600 and not the Q9650, and my processor (Q9650) is perfect, indeed, is working right now on the P5Q Pro Turbo.
Contact to the people of DFI to see what he says.
Greetings and thanks.
-
Please help me !
I lost my CD driver main DFI UT45 T3RS :(.
Please upload this CD for me.
THANKS SO MUCH.
-
DFI Download Site page for UT P45 T3RS
-
The C1 error is memory related. This board has a horrid vDimm vdrop of .1v. The board likes to reset to default vdimm of 1.8v which is really 1.7v when measured by a DMM. This makes it really hard for most memory sticks with D9's to post. Try posting with some non-D9 memory, set vDimm to 2.3v in BIOS, shutdown and then try your D9's again. I ended to doing a vdimm V'mod, but I still have issues with C1 from time to time.
-
Need some help here
I bench Dry Ice with my DFI DK P45 on saturday midnight
It work fine during the bench session
Now it won't power up
Power supply is there(mobo light light up)
Now i left it dry with heatpipe assembly removed
Any idea on what happend?
Desperately need help:shrug:
-
-
take battery out for 20 min
or
bake it 380-400f for 7-8 min
-
Quote:
Originally Posted by
zsamz_
take battery out for 20 min
or
bake it 380-400f for 7-8 min
Tried take battery out for couple of days and that did not help
Haven't try baking it yet through
-
Quote:
Originally Posted by
OC4/3
Tried take battery out for couple of days and that did not help
Haven't try baking it yet through
if you cant rma
bakin your only hope
the dk series are verry sensitive lol
-
Quote:
Originally Posted by
zsamz_
if you cant rma
bakin your only hope
the dk series are verry sensitive lol
Warranty is over so no way i can RMA it:(
-
Quote:
Originally Posted by
OC4/3
Warranty is over so no way i can RMA it:(
bake it or throw it away lol
-
Quote:
Originally Posted by
zsamz_
bake it or throw it away lol
Buy another one or some other P35/P45 motherboard:p:
-
An update:
My motherboard does boot now
My question now is:What is the best BIOS for SPI 1M with E8600 processor?:D
-
Quote:
Originally Posted by
OC4/3
An update:
My motherboard does boot now
My question now is:What is the best BIOS for SPI 1M with E8600 processor?:D
I would say 914........................but it really depends on what ram you have onboard.
-
Quote:
Originally Posted by
kitfit1
I would say 914........................but it really depends on what ram you have onboard.
Team Xtreem DDR 2 1066mhz CL5 D9GKX
-
Quote:
Originally Posted by
OC4/3
Team Xtreem DDR 2 1066mhz CL5 D9GKX
I would defo say 914 then.
-
Sorry for the bump, but is anyone using the latest 3TB drives on their boards? I want to update my current WD 500GB drives for something a bit larger.
I am running Windows 7 x64 so that should not be a problem.
I realize there are tools available from other manufacturers to overcome any problems, but I am curious about the dfi.
