**Official DFI LanParty UT X48-T2R(and LT) Discussion

Printable View

Show 100 post(s) from this thread on one page

04-27-2008, 06:45 PM
Clunk

Added a few new pics, tables etc, tidied up a few things.

DFI BIOS Guide.

DFI LT-UT X38/X48 Voltage Measuring Points.

DFI LT X48-T2R Living Review.
04-27-2008, 06:48 PM
Jultsu

Quote:

Originally Posted by Clunk

I did the Geil Black Dragon 2GB modules ok at 1066Mhz.

The modules wouldn't go any higher, but I will try some different settings tomorrow if required :)

I wasn't talking about the DDR clocks, I meant FSB. Is it too much to ask for this board to run a q6600 400+ fsb with 8GB, or is it doable?
04-27-2008, 10:05 PM
safan80

here's something that pisses me off I can't get my 9800gx2 to work under vista x64. It works fine under xp pro x64 with drivers 174.74. under vista x64 any driver I install 174.74-175.12 vista will lock at boot up, but if I uninstall the nvidia drivers vista x64 boots up without a problem. my dfi x48 came with the latest bios from 3/20, so I guess I'm going to have to wait for this to get fixed by Nvidia :shakes:
04-28-2008, 01:34 AM
KanGaXx

Quote:

Originally Posted by Big Lar

I had mine at 515 with 1.525NB, VTT @ 1.12 was all. That was with 2x2gb of ram as well. GTL's were 63/63/67 at the time, which is probably why I was not stable then :D

Larry

i tryed !!!
boot 520 with 1,8vnb and 1,5vtt but not stable.
520x8 ..

510 with less the 1,35 vb dont boot

gtl 63/63/67 and tryen for nb 70/80 ... sux
04-28-2008, 05:21 AM
Clunk

I have BIOS 0402 if anyone wants it :D
04-28-2008, 05:24 AM
GlowingBulb

Nice Clunk, what improvements over 320 are listed?
04-28-2008, 05:29 AM
Clunk

No idea, just got it in an email.

Theres no changelog or anything, just the .BIN file.

Remember it's a Beta though :D

If anyone wants it, PM me your email address.
04-28-2008, 05:29 AM
adya

Quote:

Originally Posted by Clunk

I have BIOS 0402 if anyone wants it :D

yeah for sure. is there much difference between 320 and 402? do u know if it allows u to manually tune fine delay to any figure possible?

*edit .late post sorry.
04-28-2008, 05:38 AM
Clunk

No details whatsoever sorry mate :)
04-28-2008, 05:48 AM
adya

Quote:

Originally Posted by Clunk

No details whatsoever sorry mate :)

yeah it was a late post , so i didnt get to read ur post before that ,sorry.
re: 402 bios ,thanks for that clunk . i look forward to checking in out later.

-just a question for anyone that might know. what happens to cmos reloaded and our settings saved there? do we loose those after updating bios? i know , its another noob question , but i have to know .:)
04-28-2008, 06:03 AM
Broyler

Quote:

Originally Posted by Clunk

I have BIOS 0402 if anyone wants it :D

I want :) .......please.... Broyler5@gmail.com
04-28-2008, 07:52 AM
Clunk

For anyone else wanting the 0402 Beta BIOS, I have hosted it here.

You have to log in to download it, but thats the best I can do at the moment :)

Edit: Removed it for now, need to check the details with DFI, I will post back the details later.
04-28-2008, 08:00 AM
karateo

rapidshare :D
04-28-2008, 08:04 AM
Clunk

Logging in is less bother for me :D
04-28-2008, 09:05 AM
Broyler

Quote:

Originally Posted by Clunk

Logging in is less bother for me :D

Very Big Thanks :buddies: for bios. Already registered on your site(Nibbler1 from ROT :D ). I will flashed this bios in current weak.
04-28-2008, 09:10 AM
Clunk

Broyler, I think I emailed it to you :)
04-28-2008, 09:19 AM
Broyler

Quote:

Originally Posted by Clunk

Broyler, I think I emailed it to you :)

Yes? but you have very interesting forum, and I`m already used information from here :) And not only I :clap: Has decided to register thoroughly :D
PS: sorry for my bad english :rolleyes:

Last stability test on P35-T2R:
http://img164.imageshack.us/img164/8...1919ks8.th.png
I hope so X48-T2R Will be better
04-28-2008, 09:26 AM
Clunk

Quote:

Originally Posted by Broyler

Yes? but you have very interesting forum, and I`m already used information from here :) And not only I :clap: Has decided to register thoroughly :D
PS: sorry for my bad english :rolleyes:

Thanks :up:

Your English is better than my Russian :ROTF: :)
04-28-2008, 09:48 AM
Gogeta

Clunk, your guides for this board are phenomenal. The last DFI board I used is the Expert in my sig...and a lot has changed. Thank you for the effort and consideration. They're a BIG help to our community.
04-28-2008, 11:07 AM
KanGaXx

bios did not work, winflash said: load a correct bios...
what to do ?
04-28-2008, 12:43 PM
CERO

does this board "dislikes" D9GKX, just like the P35?

there seems to be a review about this board on anandtech: http://anandtech.com/mb/showdoc.aspx...&cp=2#comments

is this board really "inferior" to the rampage in DDR2 performance, or it is mostlikely the BIOS should be worked out?
04-28-2008, 01:17 PM
Clunk

Quote:

Originally Posted by aerie

bios did not work, winflash said: load a correct bios...
what to do ?

I will check with DFI later tonight.
04-28-2008, 01:33 PM
Rinaun

http://anandtech.com/mb/showdoc.aspx?i=3294

Good review, not sure if its better than clunks though :D
04-28-2008, 02:02 PM
Fluke_Dallas

Quote:

Originally Posted by Rinaun

http://anandtech.com/mb/showdoc.aspx?i=3294

Good review, not sure if its better than clunks though :D

Bad news for Q9450 overclockers. From the Anandtech review:

"The other positive is that users who don't want to go for elusive levels of FSB will find that the board will run fine without any need of tuning GTL levels right up to 485FSB for dual-core 45nm processors and 420FSB for quad-core 45nm processors. The bitter aspect is that boards from ASUS such as the Rampage Formula are in direct competition to DFI's offering in this segment and can run ultra high FSB speeds and lower tRD levels with relative ease."
04-28-2008, 02:28 PM
zsamz_

Quote:

Originally Posted by aerie

bios did not work, winflash said: load a correct bios...
what to do ?

use older version of winflash
download first release of x38 bios replace bin n you good;)

Show 100 post(s) from this thread on one page