best super pi times?

thate 26" at 4420 are pretty ..:):rolleyes:
my 28"
http://www.tombraiders.it/public/1mega28.jpg.JPG

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2


Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P

holy crap macci that's nearly 100% oc :eek:

Quote:

---

Originally Posted by macci

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2


Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P

---

camon kick the jappo;)

Quote:

---

Originally Posted by macci

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2


Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P

---

great result :)

this board is realy bad on v-core :S this cpu can do 3.5 easy on superpi on asus a8v becouse it goes nice to 1.95v, with gigabyte its hard to get better than 3.45 @ the best of 1.8v :S

http://ricky.home.sapo.pt/fx53/superpi24s.JPG

Wow, very nice!

I definitly need a new rig soon. 1min superpi is t3h sux :(

Well this is my Gigabyte K8NSNXP-939 with V-core modded. Unfortunatelly got only Prometia Mach II r404 modded.V-Core Mod pic 1.75M

Quote:

---

Originally Posted by macci

Now awfully close to 23sec :D
http://www.akiba-pc.com/2.8A/24s_5498.gif
2.8A (D0) @ 5498
LN2


Gets 24sec already at 5337MHz so another 20-50MHz and it would be 23s :P

---

nice 8M also

Quote:

---

Originally Posted by Mauri Antero

Well this is my Gigabyte K8NSNXP-939 with V-core modded. Unfortunatelly got only Prometia Mach II r404 modded.V-Core Mod pic 1.75M

---

my mod is like yours, but if i pass 1.8v i'v reboots... on asus 1.95v is ok and cpu likes it :D

Get a ABIT ... be a Man Ricky :P

GL m8

simpy the best... :D
Congrats Sami! ;)

http://utenti.lycos.it/kinderboy/3500+@11x262%201M.GIF

My new FX53 with R507 modded prom....

http://home.exetel.com.au/codered/fx53/superpi26.jpg

Post it while still hot, I just managed to do this a few minutes ago:

AMD A64 3200+ 1MB L2 CG stepping S754, at 9x300 = 2.7GHz, watercooled.
DFI Lanparty UT nF3 250Gb

Corsair TWINX XL 512MB with Samsung TCCD, running at DDR600 2.5-3-3 1T

http://www.hkepc.com/bbs/attachments...ccd_ddr600.gif

I have athlon64 2800+
Overcloked to 2345 MHZ

Here's mine. XP-M 2500+ @ 2.8GHz, PC3500EB 3-2-2-9 @ 2.9V. No vmods and CPU on plain water. I don't think 36s is terribly poor for such a low FSB. :banana:

My p4 again...

http://img98.exs.cx/img98/3323/Dibujo2.th.jpg

Salu2.

Quote:

---

Originally Posted by Mauri Antero

Well this is my Gigabyte K8NSNXP-939 with V-core modded. Unfortunatelly got only Prometia Mach II r404 modded.V-Core Mod pic 1.75M

---

Mauri, thats a very nice set of results you have there :toast:

That Vcore mod is unusual, you seem to be using pin 11 (Iout) instead of pin 10 (feedback) ???????

chikitano, how did you get a 19s super pi with under 4ghz, ive seen ppl go 4500 with the new 775s and get 25s

kinder, you're putting life back into 3500+ sales (see "My 3500+ can only do 2.4" Thread)

Perkam

its amazing how much things have changed since amoeba first posted that. I mean back then, a 4 Ghz P4 was a big deal.

Back then, Intel was also still competing with AMD, unlike now

Here is my best.

Abit ic7-max3
SL7KB 3.0E D0
1024 OCZ-pc4000
PCP&C 510 dlx
Air cooled SP94


http://sevenlabs.net/sucka/pictures/superpi4.jpg

Quote:

---

Originally Posted by CodeRed

That Vcore mod is unusual, you seem to be using pin 11 (Iout) instead of pin 10 (feedback) ???????

---

Pin 10 and 11 are connected together on Gigabyte mobo.

Quote:

---

Originally Posted by macci

Pin 10 and 11 are connected together on Gigabyte mobo.

---

Ahh thanks, never thought to check that :D