It seems some kind of incompatibility :(Quote:
Originally Posted by sonicsallen
Let's hope ASUS fix it with a new BIOS release.
Printable View
It seems some kind of incompatibility :(Quote:
Originally Posted by sonicsallen
Let's hope ASUS fix it with a new BIOS release.
Speaking of which, does anyone have any kind of ETA on a new bios release?Quote:
Originally Posted by Fixxxer
Strange , very strange. Next week i'll install my new Maximus, along with a Q6600 and see if i too have this issue.Quote:
Originally Posted by GAR
okay, but you installed the asus monitoring app, yes? some of the other asus sutff off of mobo cd?Quote:
Originally Posted by GAR
I just re-partitioned my HDD, i'll jsut toss on a quick copy and check it out, let ya know later what's up. Pretty sure it was eitehr ASUS AI suite or PC Probe that installed EPU driver.
And yes, JoeBar, very strange indeed. I should be able to pin it down tho, hopefully. Keep your fingers crossed for me.:lol2:
I have them m8! :D
Update when u have more results.
sup fellas. Just a quick question.I just got my maximus and before i open it i would like to know if anyone is running a q6600 go on water at 4gig stable? Thats where im at on my x38 DQ6 atm. I hope it wont be like my asus p5k deluxe and not be able to run any of my 4 cpus at that speed. My p5k temps would sky rocket at 1.6vcore. :shrug: It is the only mb i own that cant get the job done:) Well i said the heck with it and opened it LOL. Pick of my 2 rigs...sli on the left and crossfire on the right with my new maximus toy in the middle:up: My POS evga 680i mobo rebooted right after i took the pic:rofl:
i have cpupowermonitor and cpuleveluphelp running on start up. not sure if that has something to do with installing the cd or not. but, i did click on the ASUS InstALL thingy. so i'm pretty sure it's installed. i've got to head out right now but if there is a setting or something you guys want me to try just let me know. i'm only running mid 30's under load at 1.5v according to probe. just let me know.
definately will be able to with a decent bios. just need to give it some time.Quote:
Originally Posted by Severance
What would be the best bios atm? thanx for the help guys.Quote:
Originally Posted by TheSamurai
Where is the supplied 3Dmark06 that the box states ?
Edit: Never mind found it, Is this a full copy of 3DMark06 though?
Yes advanced edition with full use of ORB>Quote:
Originally Posted by Darkatom
Hey guys. I have had my Maximus for a few weeks now and I am wondering if you guys have the same problem? My 12v line in the bios and with ASUS probe both show my 12v power rail at 11.79-11.85. I have now tried both a PC Power & Colling 750 Quad and also my Silverstone DA750 both have the same problem. I have looked at other peoples screen shots of this board and most of them are showing 12v on there Asus Probe. Is it just not reading it right? Thanks for the help.
mine in the bios reads high 11's too.
Can people post their successful OC settings here?
I just got my Maximus SE, a X3220 chip, and 2x1GB OCZ Reaper PC9200. I am now trying to push it. Everything is WCed.
I set every voltage to the highest "yellow" setting to begin with, CPU Vcore at 1.5, and DDR at 2.00 so I have some headroom. Is this a good idea, or should I leave most of it on auto?
Should I try pushing mem with a 1:1 divider, or should I go for a lower divider right away?
Thanks!
266 strap crashes on boot any higher then 360fsb for me:confused: 3dmark06 cpu score 200 lower than my dq6. Memory performance is higher:up: could not figure out the damn strap for an hour so i went from auto to 333 and up to 445fsb now priming away:)
Please explain.. What are your settings?Quote:
Originally Posted by Severance
I can't get higher than 3.5Ghz with my X3220.. Does not seem to make a difference what speed I run mem at. Any suggestions? What volt do you guys give the SB and NB?
Just wanted to stop by and thank everyone for their contribution to this thread. I purchased this board the other day and it should arrive on Monday and all this info should help me with my initial set-up since it has yet to be fully reviewed by Eva over at i4memory yet.
Funny how I bag on ASUS boards but yet I keep buying them, :shrug:.
Has anyone figured out the difference between the two revisions yet?
I have been trying to follow this thread for awhile now. I have not subscribed yet... now I have. I too have a Maximus Formula SE and things seem to be running smooth for the time being. The vdroop is a little much at .1v, I'm about to pencil mod it, but may just wait for a new bios. I look forward to reading about everyone's experiences with this board :)
By the way has anyone put the waterblock on the NB into their loop? After a couple days I decided to add it to mine and my overclocks have become MUCH more stable.
Man this sux:X I got also some crucials to run on this board, I might then cancel my order and wait what a new bios can do before making any move:XQuote:
Originally Posted by Fixxxer
Any one got their Ballistix working properly? I mean same or better clocks then they had before on a P35?
Have 4X1Gb sticks orthos blend at 1200 with 2.2V on P5E if it means anything?
:) waiting 4 ur risutls CD ;)Quote:
Originally Posted by CyberDruid
you must be running bios 0401... flash 0505 in there and it should be better.Quote:
Originally Posted by -=j0nnyr0773n=-
where the heck is the serial number for the 3dmark06?!?!?
edit: on the darned cd sleeve... lol
Anyone did some Dimm readouts @ this board for the "real" vcore/ Ram output compared with what is set @ bios?
from the ram its about .13 over what you set in bios, i think this may of been a tactic so that the board appears to over clock ram better or maybe just a screw up calibrating the voltages. for teh cpu i get about a .04 vdroop with a quad.Quote:
Originally Posted by mc2k